Technician 3, Production

semtech

Alhambra (CA)

On-site

USD 37,000 - 54,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Semtech in Alhambra, CA is seeking a Senior InP Wafer Fab Technician to execute and optimize InP-based photonic device fabrication in a dedicated cleanroom environment. The role covers grating fabrication, metallization, etching, lithography support, and SEM inspection to ensure stable, repeatable processes and high yield.

The candidate should have extensive III-V processing experience, with hands-on work on DFB lasers and gain chips, plus experience with holographic lithography and AFM

Qualifications

  • The candidate has 10+ years hands-on InP wafer fabrication experience.
  • Direct experience with DFB laser and gain chip fabrication in III-V environments.
  • Proficiency with AFM for grating and surface characterization.
  • Experience with holographic grating fabrication and lithography.

Responsibilities

  • DFB grating fabrication and characterization, including AFM analysis.
  • Metallization deposition and lift-off for device interconnects.
  • Wet and dry etch processing for InP materials.
  • Photolithography support and SEM-based inspection.
  • Module ownership, equipment uptime, and process documentation.

Skills

InP wafer fabrication
III-V processing
DFB laser fabrication
Holographic lithography
AFM metrology
E-beam evaporation
Metallization lift-off
Wet etching
Dry etching (RIE/ICP)
SEM inspection
Process module ownership
Cleanroom operations
Documentation & safety

Education

Associate's degree preferred

Tools

Holographic exposure system
AFM system
RIE/ICP tools
e-beam evaporation system
SEM

Job description

Location: Alhambra, CA (Onsite)

Position Summary

The Senior InP Wafer Fab Technician is responsible for executing and maintaining wafer fabrication processes for InP-based photonic devices, including DFB lasers and gain chips. This role requires extensive hands-on experience in III-V semiconductor processing, particularly holographic grating fabrication, metallization, and etching processes for InP materials. The technician will support multiple fabrication modules within the wafer fabrication line and play a key role in maintaining stable process operation, repeatability, and manufacturing yield. This position requires strong technical expertise, problem-solving capability, and the ability to work independently in a compound semiconductor cleanroom environment.

Responsibilities
DFB Grating Fabrication and Characterization (35%)
  • Perform grating fabrication for DFB laser structures using holographic lithography methods.
  • Set up and align holographic exposure systems to generate precise grating patterns.
  • Characterize grating pitch, depth, and uniformity using Atomic Force Microscopy (AFM).
  • Analyze grating profile data and ensure process consistency and repeatability.
  • Maintain and calibrate holographic exposure and AFM metrology systems.
  • Troubleshoot grating-related defects and process variations.
Metallization Process (20%)
  • Operate metal deposition tools including e-beam evaporation systems.
  • Execute metal stack deposition for p-contacts, n-contacts, and device interconnects.
  • Perform metal lift-off processes and inspect pattern quality.
  • Monitor film thickness and deposition uniformity.
  • Maintain process documentation and support troubleshooting of metallization-related issues.
Wet and Dry Etch Processing (20%)
  • Perform wet chemical etching for InP and related III-V semiconductor materials.
  • Operate dry etch systems such as RIE or ICP tools for pattern transfer and device definition.
  • Monitor etch rates, profiles, and uniformity.
  • Maintain chemical safety procedures and proper handling of process gases and chemicals.
  • Support optimization and troubleshooting of etch processes.
Photolithography Process and SEM Support (15%)
  • Support photolithography processes including resist coating, exposure, and development.
  • Assist in mask alignment and lithography process setup for device fabrication.
  • Operate Scanning Electron Microscopy (SEM) for pattern inspection, feature verification, and process qualification.
  • Perform basic inspection and process monitoring to ensure pattern quality.
  • Work closely with process engineers to maintain stable lithography operations.
Process Module Ownership and Fab Support (10%)
  • Own and manage assigned process modules within the wafer fabrication line.
  • Monitor tool performance, uptime, and process stability.
  • Assist with preventive maintenance and troubleshooting equipment.
  • Maintain process documentation and support continuous improvement initiatives.
Minimum Qualifications
  • Associate's degree preferred.
  • Minimum 10 years of hands‑on experience in InP wafer fabrication processing.
  • Direct experience with DFB laser and gain chip wafer fabrication in a compound semiconductor manufacturing environment.
  • Strong expertise in InP-based III-V semiconductor fabrication processes.
  • Hands‑on experience with DFB grating fabrication using holographic lithography techniques.
  • Proficiency in Atomic Force Microscopy (AFM) for grating and surface characterization.
  • Experience with e-beam evaporation and metallization lift‑off processes.
  • Strong knowledge of wet chemical etching and plasma dry etching of InP materials.
  • Ability to manage and operate multiple wafer fab process modules.
  • Strong troubleshooting and problem‑solving skills in a cleanroom environment.
  • Familiarity with semiconductor manufacturing documentation, safety practices, and process control.

The intent of this job description is to describe the major duties and responsibilities performed by incumbents of this job. Incumbents may be required to perform job‑related tasks other than those specifically included in this description.

All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities.

A reasonable estimate of the pay range for this position is $27 - $39/hr. There are several factors taken into consideration in determining base salary, including but not limited to: job-related qualifications, skills, education and experience, as well as job location and the value of other elements of an employee's total compensation package.

#LI-Onsite

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Technician 3, Production
Technician 3, Production

Sierra Wireless • Alhambra (CA)

On-site
USD 34,440 - 48,216
Wafer Fab Technician - Photolithography & Wet Etch
Wafer Fab Technician - Photolithography & Wet Etch

Sierra Wireless • California

On-site
USD 34,000 - 50,000
Wafer Fab Technician - Metallization, Dry Etch & Wet Etch
Wafer Fab Technician - Metallization, Dry Etch & Wet Etch

Sierra Wireless • California

On-site
USD 34,000 - 50,000
Wafer Fab Technician – Metallization, Dry Etch & Wet Etch
Wafer Fab Technician – Metallization, Dry Etch & Wet Etch

Semtech • California

On-site
USD 34,000 - 50,000
Wafer Fab Technician – PECVD, Dry Etch & Wet Etch
Wafer Fab Technician – PECVD, Dry Etch & Wet Etch

Semtech • California

On-site
USD 34,000 - 50,000
Wafer Fab Technician – Photolithography & Wet Etch
Wafer Fab Technician – Photolithography & Wet Etch

Semtech • California

On-site
USD 34,000 - 50,000
Wafer Fab Technician - PECVD, Dry Etch & Wet Etch
Wafer Fab Technician - PECVD, Dry Etch & Wet Etch

Sierra Wireless • California

On-site
USD 34,000 - 50,000
Sr. Engineer, Process Development
Sr. Engineer, Process Development

Sierra Wireless • California

On-site
USD 95,000 - 135,000
Senior Fab Quality Manager - InP Photonics
Senior Fab Quality Manager - InP Photonics

Semtech • Alhambra (CA)

On-site
USD 130,000 - 185,000
Backend Process Engineer
Backend Process Engineer

semtech • Alhambra (CA)

On-site
USD 100,000 - 135,000