Technical Specialist II

Hargrove Engineers + Constructors

Greenville (SC)

On-site

USD 110,000 - 160,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Hargrove Engineers + Constructors is seeking a lead designer to supervise a team of designers and deliver the electrical and instrumentation deliverables on time, within budget, and to quality expectations. This senior role requires extensive experience in electrical and instrumentation design and uses project controls for cost, schedule and quality.

The ideal candidate will have 15+ years of relevant industrial experience, familiarity with NEC, and the ability to mentor staff while coordinating

Qualifications

  • Familiarity with NEC and electrical design standards.
  • Ability to size wire, conduit and overcurrent protection for lighting and power.
  • Experience producing electrical installation specifications and related drawings.
  • Proven capability to lead and mentor a design team.

Responsibilities

  • Supervise and provide technical direction to a team of designers.
  • Produce 480VAC and 15kV/5kV equipment specifications with review and approval.
  • Deliver electrical and instrumentation deliverables on time and within budget.
  • Coordinate work with other staff and discipline leads to ensure project alignment.
  • On-site support during startup and client interactions on technical matters.
  • Mentor subordinates and manage design staff performance and development.

Skills

NEC knowledge
Lighting calculations
Wire sizing
Conduit routing
Cable tray design
Load center loading
Equipment specs 480VAC/15kV
Installation documents
Project coordination

Education

Associate degree in Engineering Technology or CAD

Job description

What You'll Be Doing

Job Scope: Generally responsible for supervision and technical direction over a team of designers when functioning as a lead designer. As lead designer, responsibilities will include total delivery of the electrical and instrumentation deliverables and services on time, within performance budget and meeting quality expectations. Duties may include performing advanced design work serving as a technical specialist for a complex design assignment. This level requires extensive progressive experience in electrical and instrumentation design and involves utilization of project controls for cost, schedule and quality of projects. This work will be performed under minimal supervision.

Primary responsibilities will include but not be limited to:
  • Familiarity with and utilizing department design and drafting standards.
  • Recognizing and communicating project scope, specifications and design criteria upon assignment to a project task team.
  • Producing installation details, motor control center single lines, electric room layouts, motor control elementaries, connection diagrams, cable schedules, control panel layouts and grounding, lighting, power and instrumentation plans under minimal supervision.
  • Recognizing and communicating scope and design changes promptly.
  • On-site assistance during startup.
  • Providing technical guidance to less experienced drafting personnel in the department.
  • Coordinating work activities with other staff members and the discipline lead.
  • Providing discipline lead with the current status of project work, including identification of delays or improvements in the projected finish date.
  • Conferring with clients to determine scopes of work and interact with clients on technical matters
  • Producing 480VAC equipment specifications with engineering review and approval.
  • Producing 15kV/5kV equipment specifications with engineering review and approval.
  • Producing electrical installation specifications with engineering review and approval.
  • Complete understanding of the skills and experience required to perform design functions.
  • Proactively lead and coordinate the efforts of a design staff to achieve scope, schedule and budget objectives.
  • Mentoring subordinates.
  • Participating in team or cross-discipline checks to insure coordination between the design disciplines.
  • Checking calculations made by other designers to ensure accuracy, conformance to codes, specifications, design criteria and conformance to good engineering practice.
  • Determining construction quantities and provide construction cost estimates.
  • Delegating work to designers in proportion to their technical skills and experience, then following up for support to ensure efficient progress and quality.
  • Consulting with design leaders from other disciplines in proportion to their technical skills and experience, then following up for support to ensure efficient progress and quality.
  • Participating in the planning of training programs, continuous education opportunities and professional development of staff.
Ideal Background
  • Education: Associate degree in Engineering Technology or Computer-Aided Drafting is required.
  • Certification: Certification is not required at this level.
  • Experience: This position requires 15+ years of relevant industrial experience in electrical and instrumentation drafting and design.
Required Knowledge, Skills, and Abilities:
  • Familiarity with the current version of the National Electrical Code (NEC).
  • Ability to perform lighting level calculations.
  • Ability to size wire, conduit and overcurrent protection for both lighting and power applications.
  • Ability to perform voltage drop calculations.
  • Ability to route conduit and cable tray.
  • Ability to calculate tray and conduit fill.
  • Able to determine motor control center loading.
  • Familiarity with specifications and installation details of construction bulk materials and equipment.
  • Ability to create accurate electrical installation documents from the information found on vendor equipment drawings.
  • Ability to determine load center unit substation loading.
  • Knowledge and understanding of work flow/information flow between disciplines.
  • Knowledge and understanding of schedule constraints and information requirements for the production of all electrical deliverables.
  • Ability to accurately estimate completion of assigned tasks.
  • Ability to determine load center unit substation loading.
  • Ability to develop equipment specifications for 480VAC equipment such as, motor control centers, variable frequency drivers, induction and synchronous motors, load center unit substations, etc. with engineering review and approval.
  • Ability to produce a 15kV power system equipment and installation techniques both above and below ground.
  • Familiarity with 15kV power system equipment and installation techniques both above and below ground.
  • Ability to develop equipment specifications for 15kV/5kV equipment such as, switchgear, load break switches, motor control centers, etc
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Electrical Designer
Senior Electrical Designer

Hargrove Engineers + Constructors • Birmingham (AL)

On-site
USD 120,000 - 180,000
I&E Design Lead
I&E Design Lead

Hargrove Engineers & Constructors • Texas

On-site
USD 120,000 - 160,000
Electrical Engineer
Electrical Engineer

Hargrove Engineers + Constructors • Baytown (TX)

On-site
USD 90,000 - 130,000
Paid time off
Health insurance
Matching retirement contributions
Instrument Lead Engineer
Instrument Lead Engineer

Hargrove Engineers + Constructors • Atlanta (GA)

On-site
USD 90,000 - 130,000
Electrical & Instrumentation Engineer III
Electrical & Instrumentation Engineer III

Hargrove Engineers + Constructors • Decatur (AL)

On-site
USD 80,000 - 110,000
Paid time off
Health insurance
Matching retirement contributions
Electrical & Instrumentation Engineer
Electrical & Instrumentation Engineer

Hargrove Engineers & Constructors • Texas

On-site
USD 75,000 - 110,000
Paid time off
Health insurance
Retirement contributions
Senior Electrical Engineer
Senior Electrical Engineer

Hargrove Engineers + Constructors • Houston (TX)

On-site
USD 180,000 - 260,000
Health insurance
Paid time off
Retirement matching
Electrical Engineer
Electrical Engineer

Hargrove Engineers + Constructors • Pasadena (TX)

On-site
USD 90,000 - 120,000
Electrical Designer IV
Electrical Designer IV

Hargrove Engineers + Constructors • Atlanta (GA)

On-site
USD 90,000 - 130,000
Paid time off
Health insurance benefits
Retirement contributions match
Electrical & Instrument Designer
Electrical & Instrument Designer

Hargrove Engineers + Constructors • Wade Hampton (SC)

On-site
USD 110,000 - 160,000
Comprehensive benefits including paidH
Teammate-owned company
Paid holidays
+2