Technical Sourcing Engineer

Jabil Inc.

Saint Petersburg (FL)

On-site

USD 90,000 - 120,000

Full time

40 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Jabil Inc. in Saint Petersburg, FL, seeks a Technical Sourcing Engineer to drive supplier selection and part validation for design, NPI, and risk/cost reduction. The role requires analyzing supplier inputs, leveraging Jabil’s tools, and adapting to changing project requirements with urgency.

Responsibilities include BOM pricing evolution, resolving cost differences, obtaining DFM recommendations, and supporting supplier negotiations. Travel up to 60% may be required.

Qualifications

  • Bachelor’s degree in Engineering or Supply Chain is preferred.
  • Advanced Excel and data analysis skills.
  • Ability to read and interpret 2D/3D drawings and GD&T guidelines.
  • Strong communication skills in English, with ability to present to internal stakeholders.

Responsibilities

  • Drive supplier selection and part validation across design, NPI, and risk/cost reduction.
  • Solicit BOM pricing and resolve cost differences due to BOM/design changes.
  • Solicit DFM recommendations and provide guidance on product/process optimization.
  • Support supplier selection aligned with commodity management and negotiations.
  • Maintain clean-to-build part status across design phases and hand off to production.

Skills

Excel
Reading 2D/3D drawings
GD&T knowledge
English proficiency

Education

Bachelor’s degree in Engineering or Supply Chain

Job description

Job Summary

The Technical Sourcing Engineer will drive the supplier selection and part validation processes for three major facets of Jabil’s needs: (1) Design, (2) NPI, (3) Risk/Cost Reduction. This position requires situational analysis to leverage Jabil’s Supply Chain and Sourcing organizations as well as Jabil’s tools, templates, and processes to ensure we are identifying, validating, and deploying components into Jabil’s supply base correctly. This role must shift and adapt quickly to changing project requirements and act with a sense of urgency.

  • Solicits BOM pricing as it evolves through each design and mass production milestone.
  • Responsible for resolving cost differences and addressing supply chain impacts due to BOM changes, design shifts, and scope changes. Responsible for providing detailed explanation for any unresolved issues.
  • Solicits supplier Design for Manufacturability (DFM) recommendations as required. Interprets supplier feedback to provide clear guidance on product and/or process optimization.
  • Supports the supplier selection process in alignment with commodity management.
  • Supports supplier negotiations and risk mitigation as required.
  • Provides guidance to buyers and maintains clean-to-build part status for all design phases.
  • Promotes Early Supplier Involvement.
  • Where assigned, develops a supply chain strategy for all components identified as Jabil’s ownership.
  • Support qualification process of components and suppliers under Jabil ownership, including but not limited to DFM, FOT, PPAP, and APQP.
  • Supports supplier negotiations and risk mitigation as required.
  • Provides guidance to buyers and maintains clean-to-build part status for all design phases.
  • Works with NPI buyer and selected suppliers to optimize and minimize on hand inventory.
Job Summary

The Technical Sourcing Engineer will drive the supplier selection and part validation processes for three major facets of Jabil’s needs: (1) Design, (2) NPI, (3) Risk/Cost Reduction. This position requires situational analysis to leverage Jabil’s Supply Chain and Sourcing organizations as well as Jabil’s tools, templates, and processes to ensure we are identifying, validating, and deploying components into Jabil’s supply base correctly. This role must shift and adapt quickly to changing project requirements and act with a sense of urgency.

Essential Duties And Responsibilities
  • Solicits BOM pricing as it evolves through each design and mass production milestone.
  • Responsible for resolving cost differences and addressing supply chain impacts due to BOM changes, design shifts, and scope changes. Responsible for providing detailed explanation for any unresolved issues.
  • Solicits supplier Design for Manufacturability (DFM) recommendations as required. Interprets supplier feedback to provide clear guidance on product and/or process optimization.
  • Supports the supplier selection process in alignment with commodity management.
  • Supports supplier negotiations and risk mitigation as required.
  • Provides guidance to buyers and maintains clean-to-build part status for all design phases.
  • Promotes Early Supplier Involvement.
  • Where assigned, develops a supply chain strategy for all components identified as Jabil’s ownership.
  • Support qualification process of components and suppliers under Jabil ownership, including but not limited to DFM, FOT, PPAP, and APQP.
  • Supports supplier negotiations and risk mitigation as required.
  • Provides guidance to buyers and maintains clean-to-build part status for all design phases.
  • Works with NPI buyer and selected suppliers to optimize and minimize on hand inventory.
Risk/Cost Reduction:
  • Where assigned, supports supply chain projects including cost optimization, quality improvement, and supply assurance in alignment with commodity management.
  • Supports purchasing organization with short-term/high-risk quality issues, line down constraints, and supplier negotiations.
  • Takes guidance from senior team members, SCDMs, SSMs, and Business Unit on Risk/Cost Reduction projects and supports building value propositions.
  • undefined
  • undefined
  • Supports Supply Chain & Sourcing deliverables per Jabil’s current templates, software solutions, and processes.
  • Supports cost estimating on a variety of custom parts.
  • Ensures successful handoff to production teams by confirming all selected components are fully qualified, validated, and ready for procurement per Jabil and Customer guidelines.
  • Supports identification and deployment of Jabil process improvements.
  • Adheres to all safety and health rules and regulations associated with this position and as directed by supervisor.
  • Complies, follows, and enforces all procedures within the company security policy.
Minimum Requirements
  • A Bachelor’s degree (preferably in Engineering or Supply Chain) with preferably 1 year of internship or work experience
  • Or an equivalent combination of education and experience.
  • Ability to read and interpret 2D and 3D drawings and identify key information to manufacture a component such as following GD&T guidelines.
  • This job may require up to 60% travel.
Language Skills

Advanced PC skills, with emphasis on Excel, Word, and Powerpoint. Ability to read, analyze, interpret, and communicate regarding common scientific and/or technical journals. Ability to respond internally to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to internal stakeholders; Ability to read and speak English.

REASONING ABILITY

Strong problem solving, analytic, negotiation, project management and people skills are a must. Ability to define problems, collect data, establish facts, summarize information and draw valid conclusions.

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to solve practical problems with limited information. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to work effectively under pressure with constantly changing priorities and deadlines. Individual may be required to sit, stand, walk regularly and occasionally lift up to 15 lbs. Be accessible to production floor and office staff and to use required office equipment. Specific vision requirements include reading of written documents and use of computer monitor screen frequently.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area. The noise level in this environment is typically low.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Technical Sourcing Manager
Technical Sourcing Manager

Jabil Inc. • Saint Petersburg (FL)

On-site
USD 110,000 - 150,000
Sr Technical Sourcing Manager
Sr Technical Sourcing Manager

Jabil Inc. • United States

Remote
USD 126,000 - 227,000
Short-term incentive
Medical, dental, and vision insurance
Paid time off
+3
Sr. Technical Sourcing Engineer
Sr. Technical Sourcing Engineer

Jabil Inc. • Saint Petersburg (FL)

On-site
USD 110,000 - 140,000
Technical Sourcing Manager
Technical Sourcing Manager

Jabil Inc. • Austin (TX)

On-site
USD 120,000 - 180,000
Technical Sourcing Manager
Technical Sourcing Manager

Jabil Inc. • Jackson (TN)

On-site
USD 100,000 - 150,000
Sr. Technical Sourcing Engineer
Sr. Technical Sourcing Engineer

Jabil Inc. • Jackson (TN)

On-site
USD 100,000 - 150,000
Sr. Manager, Technical Sourcing Org
Sr. Manager, Technical Sourcing Org

Jabil • Saint Petersburg (FL)

On-site
USD 120,000 - 190,000
Electrical Lead - 2nd Shift
Electrical Lead - 2nd Shift

Jabil Inc. • Memphis (TN)

On-site
USD 52,000 - 68,000
Buyer II
Buyer II

Jabil Inc. • Memphis (TN)

On-site
USD 85,000 - 110,000
Manufacturing Test Lead - IRHX Shift B
Manufacturing Test Lead - IRHX Shift B

Jabil Inc. • Byhalia (MS)

On-site
USD 42,000 - 64,000