Systems Engineer III

Crane Aerospace & Electronics; Lynnwood (WA); On-site; USD 125,000 - 147,000; Full time

Benefits offered by this job

Health and insurance

401k plan

Education reimbursement

Paid time off

Job summary

Crane Aerospace and Electronics in Lynnwood, WA is seeking a Systems Engineer III. The role focuses on researching, planning, designing, and developing aerospace and electronics products, including new designs, modernization, and upgrades.

You will work with cross-functional teams to meet performance, cost, and customer requirements, and use CAE tools to deliver reliable solutions. A minimum of 5 years' experience and an engineering degree are required.

Qualifications

• 5 years of relevant work experience.
• BA or BS in an engineering discipline; MS/PhD preferred.
• Familiarity with ARP4754 and DO-178/DO-254/DO-160.
• Knowledge of transformers, power conditioning, DC-DC converters, magnetics, and related subsystems.

Responsibilities

• Collaborate with functional groups to meet performance and cost targets.
• Support Kaizen and 5S for process improvements.
• Define, understand and comply with guidelines to ensure safe operations.
• Plan, estimate, and manage work to meet schedules and budgets.
• Lead system development activities and perform safety analyses such as ARP4761.

Skills

System engineering

ARP4754

Simulink modeling

Requirements management (DOORS)

Electrical systems knowledge

Education

BS in Engineering

MS/PhD preferred

Tools

DOORS

Simulink

Job description

Onsite

Lynnwood, Washington

Full time

JR101333

Crane Aerospace and Electronics has an exciting opportunity for a Systems Engineer III at our Lynnwood, WA location.

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).

Located in the epicenter of United States aviation manufacturing, our Crane Aerospace & Electronics Lynnwood, Wash., facility delivers industry-leading aerospace & defense power, sensing and fluid solutions. Our products are rugged enough to fly 5 billion miles from Earth on NASA's New Horizons spacecraft and innovative enough to be featured on Advanced Air Mobility demonstrators. You'll join a group of aerospace professionals committed to engineering excellence and work in a community tucked between the idyllic Puget Sound and Cascade Mountains. Start the next chapter of your career with Crane Aerospace & Electronics!

Job Summary:

The Systems Engineer III works with minimal supervision and uses originality, ingenuity and established procedures to perform engineering duties in researching, planning, designing, and developing products for use in the Aerospace or Electronics marketplace. The Engineer III works on new product designs, modernization, and upgrades, as well as performs extensive analyses to ensure cost, quality, and customer requirements. The Systems Engineer III also uses computer-assisted engineering and design software and equipment to perform daily assignments, applying principles of science and mathematics to develop economical solutions to technical problems.

Essential Functions:

• Work effectively with all functional groups to achieve product performance and cost targets. Build quality and manufacturability into the design. Define/understand/comply with company and regulatory guidelines to assure a safe operating environment.
• Support continuous process improvement activities including Kaizen, 5S practices to ensure an organized and efficient working environment, and personal development.
• Demonstrate proficiency with verbal and written English for technical reports, presentations, analyses, or other communications at the appropriate level throughout the organization.
• Understand, decompose, and define product and process requirements to support product development, sustaining and R&D.
• Plan, estimate, prioritize, and manage work activities to support meeting project schedules and budgets.
• Utilizeexperience and judgment to plan and accomplish goals. Produce thorough and accurate design and development work of suitable complexity that meets all customer specifications and company requirements for schedule, cost,producibility, quality, and reliability.
• Utilize proficient problem solving processes, documentation, tools and analyses to quickly and effectively identify root cause and corrective actions to technical challenges and/or issuein support of product development and product sustaining assignments
• Generate and review product development documentation including proposals, technical reports, procedures, correspondence, etc. necessary to satisfy customer and program requirements.
• Self-directed and motivated while working and communicating effectively within a team environment that consists of several engineering, operations, quality, and business disciplines.
• Provide support of IPT activities in collaboration with other technical, operations, quality, and business disciplines.
• Contribute to all Systems Engineering aspects (architecture and components) from initial product research, architecture definition, requirements definition, requirements validation, systems verification, management and flow down to functional engineering groups
• Experience leading system development activities following industry recognized processes (e.g. ARP4754)
• Lead the development of System Safety analyses such as reliability predictions, Failure Modes and Effect Analyses, Fault Tree Analysis, Common Mode Analysis and Single Event Upset analysis (ARP4761)
• Participate in the certification compliance activities of essential and critical level control systems for aircraft applications
• Any other task assigned by supervisor or management

Eligibility Requirement:

This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).

Minimum Qualifications:

Experience: 5 years of relevant work experience

Education/Certification: BA or BS Degree in an engineering discipline. Masters or PhD preferred.

Knowledge:

• Experience of system development following industry recognized processes (e.g. ARP4754)
• Familiarity with DO178, DO254 and DO160
• Knowledge of the general principles involved with the development of Transformer Rectifier Units, Power Conditioning Units, DC-DC Converters, Magnetics, Battery Chargers, Landing Gear Control and Indication Systems, Door and Slide Control and Indication Systems and Tire Pressure Monitoring Systems.
• Understands Systems Engineering principles, including interpreting and writing requirements, system architectures and designs
• Knowledge of requirements management, validation and verification.
• Familiarity with multi physics modeling and simulation (i.e. Simulink)
• Familiarity with circuit analysis and power supply topologies
• Familiarity with Software development lifecycle

Skills/Abilities

• Working knowledge of requirements management tools (e.g. DOORS) highly desirable

Working Conditions:

• Standard office environment
• Working conditions are normal for a manufacturing environment
• Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
• May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes
• Requires work with small to medium size hand and power tools
• Occasional travel to customer and outside test lab facilities for technical interchange meetings, design reviews, product testing support, and to attend technical seminars
• May need to travel domestically and internationally (up to 10%)

Standing: 10% *percentage is approximate and may vary depending on work task

Sitting: 90% *percentage is approximate and may vary depending on work task

Lifting (in pounds): up to 20 pounds

Pushing (in pounds): up to 20 pounds

Mental/Visual: use of computer, calculator, filing cabinets

Workspace: cubicle/desk/lab

Top Benefits:

As a team member at Crane Aerospace and Electronics, you'll enjoy:

• Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month
• Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.
• 401k Retirement Plan: 401k plan with company match
• Education Reimbursement: eligible after 6 months of employment

You can see a list of our benefits at https://www.craneae.com/company/careers or visit our website at www.CraneAE.com for more information on our company and great opportunities.

We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool.

#LI-SP1 #CAE

Salary range: $124,600.00 - $146,900.00.

Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

At Crane, we believe that attracting and retaining the highest quality people is the best insurance of success. Our goal is to recruit talented people and train them within a culture that calls for performance with trust and respect. Join us.

The unique backgrounds and differences of our associates make us stronger, more capable, and more successful. Beyond an associate's base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement - as well as performance-based bonus programs for certain positions. Crane prioritizes career development for our associates. All associates receive an annual development plan that includes a mixture of on-the-job coaching and formal training experiences to support individual development needs. We firmly believe in associate growth that supports career progression and we will proactively support your ongoing career development.