Structural Welder

The Shaw Group, Llc; Beaumont (TX); On-site; USD 40,000 - 65,000; Full time

Job summary

The Shaw Group, Llc is seeking an experienced Welder to certify multi-process structural steel and perform general welding procedures. You will weld in flat, horizontal, vertical, or overhead positions, follow instructions, and use various equipment while maintaining quality standards.

The role requires a high school diploma or equivalent, familiarity with welding safety, and ability to pass certification tests.

Qualifications

• HS diploma or equivalent required.
• Experience in welding preferred.
• Knowledge of welding safety protocols.
• Able to follow instructions and established guidelines.

Responsibilities

• Manually guides electrode or gun along weld line to form specified depth of fusion and bead.
• Inserts electrode into portable holder or threads consumable electrode wire through welding gun.
• Connects cables from welding unit to obtain amperage, voltage, slope, and pulse as specified.
• Starts power supply to produce electric current.
• Strikes arc to deposit metal from electrode to work piece and join edges.
• Welds in flat, horizontal, vertical, or overhead positions.
• Cleans or degreases weld joint or work piece as needed.
• Repairs broken or cracked parts and fills holes.
• Prepares broken parts for welding by grooving or scarfing surfaces.
• Chips off excess weld, slag, and spatter.
• Preheats work piece as required.
• Positions and clamps work pieces or assembles them in jig or fixture.
• Tacks assemblies together.
• Cuts metal plates or structural shapes.
• May be designated by equipment type of welding process.
• Able to weld 1/4" stainless plate.
• May pass employer tests to meet certification standards.
• Performs only trained and authorized tasks.

Skills

Welding

Safety compliance

Education

High school diploma or equivalent

Tools

Flux-Cored Arc Welding (FCAW)

GMAW (MIG)

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Operations Full Time Project Beaumont, Texas, Beaumont, TX, US

3 days ago Requisition ID: 1954

Summary:

Capable of certifying multi-process structural steel while being proficient in general welding procedures.

Responsibilities:

• Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
• Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun.
• Connects cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified by Welding Engineer or Supervisor.
• Starts power supply to produce electric current.
• Strikes arc which generates heat to make and deposit metal from electrode to work piece and join edges of work piece.
• Welds in flat, horizontal, vertical, or overhead positions.
• May clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath.
• May repair broken or cracked parts and fill holes.
• May prepare broken parts for welding by grooving or scarfing surfaces.
• May chip off excess weld, slag, and spatter, using hand scraper or power chipper.
• May preheat work piece, using hand torch or heating furnace.
• May position and clamp work pieces together or assemble them in jig or fixture.
• May tack assemblies together.
• May cut metal plates or structural shapes.
• May be designated according to type of equipment used as Welder, Carbon Arc (welding); Welder, Flux-Cored Arc (welding); Welder, Gas-Metal Arc (welding); Welder, Gas-Tungsten Arc (welding); Welder, Hand, Submerged Arc (welding); Welder, Plasma Arc (welding); Welder, Shielded-Metal Arc (welding)
• Able to weld 1/4\" Stainless plate.
• May be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations.
• Performing only those jobs on which they have been trained and/or authorized.

Education and Experience:

• May require a high school diploma or its equivalent.
• May require previous years of experience in the field or in a related field.
• Has knowledge of commonly used concepts, practices, and procedures within a particular field.
• Relies on instructions and pre-established guidelines to perform the functions of the job.

Physical Requirements:

NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)

Pushing F Pulling F Climbing O

Kneeling F Crouching F Crawling F

Feeling C Vision C Hearing C

Lifting (lbs.) Carrying (lbs.)

0-10 C 0-10 C

10-25 F 10-25 F

We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.