Staff Technical Specialist– GNSS Connectivity

General Motors Corporation; Warren (MI); Hybrid; USD 160,000 - 245,000; Full time

Benefits offered by this job

GM vehicle discounts

Relocation assistance

Health benefits

Job summary

General Motors seeks a Staff Hardware Engineer– GNSS to lead GNSS hardware definition, design, and validation for connectivity across its next generation vehicles. You will work with product, systems, RF, and validation teams to deliver automotive-grade GNSS solutions.

Responsibilities include end-to-end GNSS requirements, RF front-end interfaces, antenna integration, and test planning. This hybrid role spans Warren, MI and Sunnyvale, CA, requiring 10+ years in GNSS/RF hardware with a BS in

Qualifications

• Bachelor's degree in Electrical Engineering or related field required.
• 10+ years GNSS or RF hardware design, integration or validation.
• Hands-on with RF test equipment (spectrum/network analyzers, GNSS tools).
• Schematic and PCB layout review experience for RF/GNSS.
• Knowledge of RF theory and GNSS front-end design.

Responsibilities

• Define end-to-end GNSS hardware and system requirements.
• Collaborate with suppliers and purchasing on evaluations and roadmaps.
• Review RF front-end, antenna interfaces, and PCB layouts for GNSS sections.
• Develop and execute GNSS test plans and analyze results.
• Lead design reviews and validate GNSS performance in vehicles.

Skills

GNSS hardware

RF design

Schematic design

PCB layout

RF testing

Supplier collaboration

Communication skills

Education

Bachelor's degree in Electrical Engineering

Master's degree in Electrical/Electronics/Computer Engineering

Tools

Spectrum analyzers

Network analyzers

GNSS simulators

Power meters

Job description

## Staff Hardware Engineer– GNSS ConnectivityApplyremote type: Hybridlocations: Warren, Michigan, United States of America: Sunnyvale, California, United States of Americatime type: Full timeposted on: Posted Todayjob requisition id: JR-202608970**Job Description****The Role**In-vehicle connectivity and precise positioning are critical enablers for advanced driver assistance, autonomous driving, and connected vehicle services. We are seeking a **Staff Hardware Engineer– GNSS** to lead the definition, design, and validation of GNSS (Global Navigation Satellite System) solutions for our current and future generations of connectivity and compute platforms across a broad range of vehicles.This role will serve as the subject matter expert for GNSS hardware and system performance, working closely with product, systems, RF, hardware design, suppliers, and validation teams to deliver robust, automotive-grade GNSS solutions.**What You’ll Do (Responsibilities):**System & Requirements Ownership* Define end-to-end GNSS hardware and system requirements for connectivity and compute modules, including RF front-end, baseband, timing, and antenna interfaces.* Translate product and vehicle-level requirements into clear, testable engineering specifications for GNSS performance (sensitivity, accuracy, availability, robustness, TTFF, jamming/spoofing resilience, etc.).* Own GNSS-related sections of hardware requirement documents, design guidelines, and interface specifications.Cross-Functional Collaboration* Collaborate with Product Management and Systems Engineering to understand use cases, feature roadmaps, and vehicle integration constraints, and reflect them in GNSS hardware requirements.* Partner with Vehicle Integration and Validation teams to align GNSS performance metrics and test plans with vehicle-level targets.* Lead and participate in design and technical reviews focused on GNSS architecture, hardware design, and validation strategy.Supplier & Roadmap LeadershipWork with GNSS chipset/module and RF component suppliers to:* Evaluate and select GNSS solutions (chipsets, modules, LNAs, filters, antenna components).* Influence supplier technology roadmaps to align with our long-term product strategy.Collaborate with Purchasing to**:*** Evaluate and score technical proposals and RFQs.* Provide clear technical recommendations balancing performance, cost, risk, and scalability.* Review and assess supplier test procedures and results for GNSS performance and compliance with internal standards.Hardware Design & RF IntegrationWork closely with Hardware Design and RF Engineering teams to:* Develop schematics for GNSS signal chains, including RF front-end, matching networks, filtering, and protection circuitry.* Review and approve PCB layouts for GNSS sections, focusing on RF best practices, grounding, isolation, controlled impedance, and coexistence with cellular, Wi‐Fi/Bluetooth, and UWB.* Provide guidance on GNSS antenna interface requirements, including active/passive antennas, feed architecture, and placement constraints.* Support design reviews, root-cause analysis, and issue resolution related to GNSS performance, EMC/EMI, and interference/coexistence.Lab & Conducted TestingDefine and execute conducted RF test plans for GNSS, including:* Sensitivity and dynamic range.* C/N0, phase noise, and insertion loss characterization.* Jamming and interference susceptibility, including coexistence with other in‐vehicle radios.* Develop test setups, fixtures, and automation for GNSS conducted characterization using spectrum analyzers, network analyzers, GNSS simulators/recorders, and RF switch matrices.* Analyze test data and provide clear, actionable design feedback to internal teams and suppliers.Vehicle-Level GNSS Performance & Test CasesDefine end-to-end vehicle-level GNSS performance requirements and KPIs, including:* Position accuracy, availability, continuity, and integrity across driving scenarios.* TTFF (cold/warm/hot start) and reacquisition.* Performance in challenging environments (urban canyon, tunnels, foliage, multipath, RF interference).Develop vehicle-level GNSS test cases and procedures, including:* Drive routes, scenario definitions, and logging requirements.* Test methods using GNSS record/playback, reference receivers, and post-processing tools.* Support execution and analysis of vehicle-level tests, working with validation and field test teams to identify root causes and corrective actions for performance issues.**Your Skills & Abilities (Required Qualifications):*** Bachelor’s degree in Electrical Engineering, Electronics Engineering, Computer Engineering, or related field.* 10+ years of experience in GNSS and/or RF hardware design, system integration, or validation.* Strong understanding of GNSS systems and standards, including GPS, GLONASS, Galileo, BeiDou, QZSS, and SBAS.* Proven experience translating system-level performance requirements into detailed hardware, design, and test specifications.* Hands-on experience with RF test equipment (spectrum analyzers, network analyzers, signal generators, GNSS simulators/recorders, power meters, etc.)* Demonstrated experience with schematic design and PCB layout review for RF/GNSS circuits.* Working knowledge of RF theory (link budgets, noise figure, gain, linearity, filters, matching networks) and its application to GNSS front-end design.* Experience collaborating with suppliers and purchasing on technical evaluations, design reviews, and roadmap alignment.**People Skills:*** Strong analytical and problem-solving skills, with the ability to deep dive complex technical issues and drive them to closure.* Excellent communication and cross-functional collaboration skills, including the ability to present technical topics to both engineering and non-technical audiences.**What Will Give You A Competitive Edge (Preferred Qualifications):*** Master’s degree in Electrical/Electronics/Computer Engineering or related discipline.* Experience with automotive GNSS applications, including vehicle-level integration and validation.* Familiarity with coexistence between GNSS and other wireless systems (cellular, Wi‐Fi, Bluetooth, UWB) and corresponding mitigation techniques.* Knowledge of automotive EMC/EMI and regulatory standards relevant to GNSS and RF systems.* Experience with RF and EM simulation tools (e.g., HFSS, CST, ADS) and system modeling (e.g., MATLAB).* Background in GNSS antenna design or integration, including active antenna systems and multi-band configurations.* Experience with test automation and data analysis (e.g., Python, MATLAB, or similar tools).**Compensation:**The compensation information is a good faith estimate only. It is based on what a successful applicant might be paid in accordance with applicable state laws. ***The compensation may not be representative for positions located outside of New York, Colorado, California, or Washington.***The expected base compensation for this role is: $160,000 - $245,000. Actual base compensation within the identified range will vary based on factors relevant to the position.**Bonus Potential:** An incentive pay program offers payouts based on company performance, job level, and individual performance.**Benefits**: GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more.**Company Vehicle**:Upon successful completion of a motor vehicle report review, you will be eligible to participate in a company vehicle evaluation program, through which you will be assigned a General Motors vehicle to drive and evaluate.Note: program participants are required to purchase/lease a qualifying GM vehicle every four years unless one of a limited number of exceptions applies.#LI-DH2This role is categorized as hybrid. This means the selected candidate is expected to report to a specific location at least 3 times a week {or other frequency dictated by their manager}.This job may be eligible for relocation benefits.