Staff Embedded Firmware Engineer - Battery

Halodi Robotics; San Carlos (CA); On-site; USD 200,000 - 280,000; Full time

Benefits offered by this job

Comprehensive medical coverage

Generous paid time off

401(k) with company match

Onsite snacks and catered lunches

Parental leave

Flexible Spending Accounts

Commuter benefits

Job summary

1X is hiring for an embedded firmware engineer to own charger and BMS firmware across multiple hardware subsystems. You will ensure robust, safe firmware as we scale to distributed nodes and bring-up during production.

You will collaborate with hardware architects, electrical engineers, and systems engineers to implement control loops, fault detection, and validation of firmware releases that meet performance targets.

Qualifications

• 5+ years of embedded firmware development in C/C++ on real hardware.
• Experience with interrupts, DMA, and timing-critical execution.
• Power conversion fundamentals and switched-mode power supplies.
• Battery charging knowledge and CC-CV multi-stage protocols.
• Embedded bus fluency with CAN and coordination with BMS.

Responsibilities

• Own charger and BMS firmware across one or more hardware subsystems.
• Develop, test, and verify firmware releases to ensure safety and reliability.
• Implement power converter control loops and voltage/current regulation.
• Create fault detection and protection features with safe-state transitions.
• Collaborate with hardware architects and electrical engineers.

Skills

Embedded firmware

C/C++

Interrupts

DMA

Timing-critical

CAN bus

SPI

I2C

UART

Oscilloscopes

Power electronics

Thermal monitoring

Tools

CAN

SPI

I2C

UART

FreeRTOS

Oscilloscopes

Job description

About 1X

We’re building humanoid robots that work in home - doing the chores, handling the tasks, and giving people their time back. Simple, but it’s not.

To do this right, we have to solve robotics, AI, manufacturing - at the same time, at scale, in a form factor that has to be safe enough to live with your family. If you’re inspired by this, you’ll thrive here. We’ve been at this since 2014 and we’re at the point where the hard problems are behind us and the hard work is in front of us.

NEO is our flagship - a home robot designed to move, learn, and operate in the real world alongside real people. We’re not demoing it - we’re shipping it. We’re excited to meet you, if this excites you.

If you’ve spent your career working on problems that matter and want to see them actually reach the world - this is that moment. We’re scaling, we’re hiring with intention, and we need people who want to build something that will genuinely change how humans spend their time - safely creating abundance for all.

About the Team

The Firmware team owns the embedded software layer that powers every hardware subsystem of our humanoid robot from distributed communication bus architecture and power management to actuator and motor drive control. We sit at the intersection of hardware and software, and our work is directly on the critical path to every product milestone: without reliable firmware, the robot cannot move, charge, or operate safely. If you want to build the foundational software for a new category of physical AI, this is where that work happens.

Your Charter

Own the firmware layer across one or more of the robot’s core hardware subsystems—ensuring embedded software that is robust, safe, and maintainable across prototype and production platforms. As one of the first companies building general-purpose humanoid robots at scale, firmware quality is non-negotiable: it determines whether the robot operates safely in uncontrolled environments, whether hardware brings up on schedule, and whether the team can move fast as the system grows to 20+ distributed embedded nodes.

Key Outcomes

• Develop and maintain charger firmware controlling AC-DC power conversion stages,
  including power factor correction and isolated DC-DC conversion topologies

• Implement charge profile management for multi-series lithium-ion packs: constant-
  current, constant-voltage, and taper phases with cell-chemistry-appropriate voltage and
  current limits

• Architect the charger-to-BMS communication interface over CAN or similar embedded
  bus, coordinating charge current requests, pack voltage feedback, temperature limits,
  and fault signaling between the two subsystems

• Responsible for the testing, validation, and verification of initial firmware releases to
  ensure functionality, reliability, and performance requirements are met

• Implement power converter control loops in firmware: voltage regulation, current
  regulation, and soft-start sequencing with stability under varying line and load conditions

• Develop fault detection and protection firmware: input overvoltage/undervoltage, output
  overcurrent, overtemperature, ground fault, and loss-of-communication with the BMS,
  each with defined safe-state transitions

Key Competencies

• Deep embedded instincts writingfirmware that is correct under real hardware conditions: interrupt timing, DMA conflicts, communication protocol edge cases, and hardware fault behavior

• First-principles problem solver diagnosing novel failures at the firmware-hardware boundary using lab tools and reasoning from fundamentals, not just vendor documentation or established patterns

• Safety-aware by default understanding what “fail safe” means in a physical system and treats protection logic, fault detection, and safe-state transitions as first-class firmware concerns

• Effective cross-functional partner translating firmware constraints and failure modes clearly to hardware architects, electrical engineers, and systems engineers; supports bring-up without waiting to be directed

Minimum Requirements

• 5+ years of embedded firmware development in C/C++ on real hardware, with direct experience managing interrupts, DMA, and timing-critical execution (7+ years for senior/staff-level positions)

• Power conversion fundamentals working understanding of switched-mode power
  supply operation: common AC-DC topologies (flyback, LLC, phase-shifted full bridge),
  power factor correction stages, transformer isolation, and how firmware-controlled
  parameters (switching frequency, duty cycle, phase shift) affect converter behavior

• Battery charging knowledge: understanding of lithium-ion charge protocols (CC-CV,
  multi-stage), the relationship between charge rate and cell degradation, and how
  temperature and cell age affect charge termination criteria

• Embedded bus fluency hands-on CAN implementation for charger-to-BMS
  coordination, plus additional embedded interfaces (SPI, I²C, UART) for communication
  with power controller ICs, monitoring devices, and auxiliary circuits

• Hardware debug at the firmware boundary experience using oscilloscopes, current
  probes, and power analyzers to diagnose problems that span firmware control behavior,
  converter waveform quality, and thermal performance

Preferred Skills

• Domain depth in one or more areas relevant to humanoid robot subsystems: distributed real-time communication bus firmware, switched-mode power conversion and lithium-ion battery charge management, or motor drive and actuator control firmware

• Experience with safety-critical or fault-tolerant embedded systems; familiarity with safety integrity standards such as IEC 61508 or ISO 26262

• Familiarity with real-time operating systems (FreeRTOS, SafeRTOS, or similar)

• Background in robotics, autonomous systems, or complex electromechanical products

What does a successful 1X Team Member look like

Team members at 1X who thrive here are builders. They move fast, own their work completely, and treat time like it’s the one thing you can’t get back - because it is. They say what they mean, finish what they start, and hold themselves to a standard before anyone has to ask. We push each other to be better, and we do it with honesty and respect.

Compensation Range

$200,000 – $280,000 + Equity

Benefits

• Comprehensive medical, dental, and vision coverage

• Generous paid time off, company holidays, and parental leave

• 401(k) plan with company match (100% on the first 3% of contributions, 50% on the next 2%)

• Flexible Spending Accounts (FSA) and Health Savings Accounts (HSA) options

• Commuter benefits (transit and parking)

• Short-term and long-term disability, and life insurance

• Employee Assistance Program (EAP) for mental health, financial, and personal support

• Onsite snacks and catered lunches

Equal Opportunity Employer

1X is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship, age, marital status, medical condition, genetic information, disability, military or veteran status, justice system impact, or any other characteristic protected under applicable federal, state, or local law.