Sr. Hardware Engineer (Teradyne, Oregon)

Teradyne Inc.; Tualatin (OR); Sur place; USD 141 000 - 226 000; Plein temps

Résumé du poste

Teradyne in Oregon seeks a Senior Hardware Engineer to design, develop, and validate high-current power delivery hardware for automated test equipment (ATE). The role emphasizes power delivery architecture, fast transient response, load regulation, protection systems, thermal management, and system-level integration.

The engineer owns power-delivery modules from concept through production release and collaborates across hardware, firmware, mechanical, and test engineering teams to enable robust

Qualifications

• 8-10+ years of experience in power electronics, high-current power delivery, or instrumentation hardware design.
• Strong expertise in switching power supplies, multiphase regulators, linear regulators, and power-stage design.
• Experience with power integrity, transient analysis, and compensation/stability design.
• Proficiency with SPICE simulation, PDN modeling tools, and PCB design tools.
• Hands-on experience with power measurement equipment and high-current test setups.
• Strong analytical and debugging skills.
• Experience designing power-delivery modules for ATE instrumentation.
• Knowledge of dynamic voltage scaling, digital power control, and telemetry systems.
• Familiarity with high-current connectors, cabling, and low-impedance mechanical design.
• Understanding of thermal modeling, heatsink design, and system-level thermal constraints.
• Bachelor’s or Master’s degree in Electrical Engineering or related field.

Responsabilités

• Architect and design high-current power delivery modules for ATE systems.
• Develop fast-response voltage/current sourcing circuits optimized for dynamic load conditions.
• Implement advanced power-stage topologies tailored for semiconductor test environments.
• Design for wide operating ranges including high-voltage rails and dynamic voltage scaling.
• Model and mitigate droop, overshoot, ringing, and ground bounce.
• Perform simulation and analysis of loop stability and transient response.
• Ensure compliance with DUT power-up sequencing, ramp rates, and timing constraints.
• Design robust protection systems including OCP, OVP, OTP, and fault isolation.
• Lead bring-up of new power-delivery modules and root-cause analysis of issues.
• Execute characterization plans for load regulation, transient response, efficiency, and thermal behavior.
• Use lab equipment to validate performance.

Connaissances

Power electronics

High-current delivery

Instrumentation hardware

SPICE simulations

PDN modeling tools

PCB design tools

Power measurement equipment

Debugging skills

Telemetry systems

Formation

Bachelor’s or Master’s degree in Electrical Engineering

Outils

Power analyzers

High-bandwidth scopes

Current probes

Electronic loads

Description du poste

Select how often (in days) to receive an alert:

Sr. Hardware Engineer (Teradyne, Oregon)

Date: Sep 9, 2026

Location: Tualatin, OR, US

We are the global test and automation specialists, powering next-generation technologies through sophisticated solutions. Behind every electronic device you use, Teradyne's test technology ensures your device works right the first time, every time! Our portfolio of automation solutions help manufacturers to develop and deliver products quickly, efficiently and cost-effectively. Together,Teradyne companies deliver manufacturing automation across industries and applications around the world!

We attract, develop, and retain a high-performance workforce, comprised of people with diverse backgrounds and a shared drive for excellence. We strive to foster a positive and inclusive work environment that helps employees, and communities, thrive.

Our PurposeTERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought and in our workforce. Our employees are supportedto innovate and learn something new every day. We cultivate a culture of inclusion for all employees that respects their individual strengths, views, and experiences. We believe that our differences enable us to be a better team – one that makes better decisions, drives innovation and delivers better business results.

Opportunity Overview

The Senior Hardware Engineer in the hardware group is responsible for designing, developing, and validating high‑current, high‑power sourcing and switching hardware used in semiconductor automated test equipment. This role focuses on power delivery architecture, fast transient response, load regulation, protection systems, thermal management, and system‑level integrationto support advanced SoCs, FPGAs, high‑power devices, and complex test conditions. The engineer owns power‑delivery modules from concept through production release and collaborates across hardware, firmware, mechanical, and test engineering teams.

Power Delivery Architecture & Design

• Architect and design high‑current power delivery modules (from mA to100+ A) for ATE systems.
• Develop fast‑response voltage/current sourcing circuits optimized for dynamic load conditions, droop control, and transient performance.
• Implement advanced power‑stage topologies (buck, multiphase, linear, hybrid) tailored for semiconductor test environments.
• Design for wide operating ranges, including high‑voltage rails, low‑voltage/high‑current rails, and dynamic voltage scaling.

Power Integrity & Transient Performance

• Model and mitigate droop, overshoot, ringing, and ground bounce under fast load steps.
• Perform simulation and analysis of loop stability, compensation networks, and transient response.
• Ensure compliance with DUT power‑up sequencing, ramp rates, and timing constraints.

Protection, Reliability & Safety

• Design robust protection systems including OCP, OVP, OTP, short‑circuit protection, and fault‑isolation mechanisms.
• Implement fast fault‑response circuits to protect sensitive DUTs and ATE hardware.
• Conduct reliability analysis, derating studies, and thermal modeling for long‑term stability.
• Support HALT/HASS, stress testing, and failure‑mode investigations.

Switching, Routing & Load Management

• Develop efficient high‑current solutions for routing power to multiple DUT pins or sites.
• Engineer low‑impedance, low‑loss paths for high‑current delivery with attention to thermal and mechanical constraints.
• Collaborate with mechanical teams on heatsinking, airflow, and thermal interface design.
• Lead bring‑up of new power‑delivery modules, performing root‑cause analysis of analog, digital, and mixed‑signal issues.
• Execute characterization plans for load regulation, transient response, efficiency, thermal behavior, and fault handling.
• Use advanced lab equipment (power analyzers, high‑bandwidth scopes, current probes, electronic loads) to validate performance.

ATE System Integration

• Ensure power‑delivery modules meet ATE system‑level requirements for timing, triggering, synchronization, and software control.
• Collaborate with firmware teams on control loops, telemetry, calibration, and fault‑reporting algorithms.
• Create and use ATE test programs to validate instrument and system level designs.
• Support integration with loadboards, probecards, and DUT power‑delivery networks.

Cross‑Functional Collaboration

• Work with product engineering, test engineering, and silicon teams to define power‑delivery requirements for new devices.
• Provide technical mentorship and contribute to power‑delivery design standards and best practices.

All About You

• 8- 10+ years of experience in power electronics, high‑current power delivery, or instrumentation hardware design.
• Strong expertise in switching power supplies, multiphase regulators, linear regulators, and power‑stage design.
• Experience with power integrity, transient analysis, and compensation/stability design.
• Proficiency with SPICE simulation, PDN modeling tools, and PCB design tools.
• Hands‑on experience with power measurement equipment and high‑current test setups.
• Strong analytical and debugging skills.
• Experience designing power‑delivery modules for ATE instrumentation.
• Knowledge of dynamic voltage scaling, digital power control, and telemetry systems.
• Familiarity with high‑current connectors, cabling, and low‑impedance mechanical design.
• Understanding of thermal modeling, heatsink design, and system‑level thermal constraints.
• Bachelor’s or Master’s degree in Electrical Engineering or related field.

Compensation

The base salary range for this role is$141,400 - $226,200.This range is a good faith estimate, and the amount of base salary will correspond with experience and skill set. This range can also fluctuate depending on demand and location.

Incentive Plan

This job is eligible for discretionary bonus(es) based on financial performance.

Teradyne offers a variety of robust health and well‑being benefit programs, including medical, dental, vision, Flexible Spending Accounts, retirement savings plans, life and disability insurance, paid vacation & holidays, tuition assistance programs, and more.

Job Segment

Thermal Engineering, Testing, Hardware Engineer, Electronics Engineer, Instrumentation, Engineering, Technology