Sr. Electrical Engineering Design Technician

Hill Phoenix, Inc.

Salem (NH)

On-site

USD 90,000 - 130,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Dover Imaging & Identification (DII) in Dover Corporation seeks an experienced engineer to test, rework and debug printed circuit boards, and build experimental setups for high-speed electromechanical assemblies for new product development.

You will contribute to laser engraving and inkjet printing products, work with a multidisciplinary team, and ensure robust design validation, documentation and lab management.

Qualifications

  • Minimum: an associate's degree and 10+ years of professional experience.
  • PCB rework involving soldering to add/remove components.
  • Experience with at least one data acquisition system.
  • Use of lab equipment (Oscilloscope, DVM, Function generator, soldering station, etc.).
  • Ability to read and understand electrical schematics.
  • Debug under the guidance of an engineer.
  • Attention to detail and eagerness to learn.
  • Excellent interpersonal, written, and oral communication skills.
  • MS Office tools.
  • Altium Designer a plus.
  • Mechanical CAD skills a plus.
  • 3D CAD experience a plus.
  • Programming motor drives a plus.
  • Junior PCB layout/design experience a plus.

Responsibilities

  • Debug and design validation of board and system-level electronics.
  • Design validation testing focused on electronics.
  • Test mechanical, electrical, and optical components and subsystems.
  • Document experimental conditions and results.
  • Build prototypes and fixtures; interface with vendors for complex parts.
  • Inspect incoming parts.
  • Manage lab and equipment, including calibration.
  • Collaborate with the technical team to maintain a safe, productive environment.
  • Design and verify cables.

Skills

PCB rework
Data acquisition
Oscilloscope
Soldering
Electrical schematics
Troubleshooting
MS Office
Altium Designer
3D CAD (CAD+)
Programming motor drives

Education

Associate's degree

Tools

Altium Designer
DVM / Oscilloscope tools
Function generator

Job description

Dover Imaging & Identification (DII) is a segment of Dover Corporation that includes the following brands: Markem-Imaje, Blue Bite, Solaris Laser, Systech, MS Printing Solutions and JK Group. We design, manufacture and deliver industrial equipment, consumables, software and services solutions for the marking & coding, consumer engagement, product traceability, authentication, and digital textile printing markets.

With more than 40 offices and over 3,000 employees worldwide, DII has a presence in +28 countries and offers numerous job opportunities globally. If you're looking for an international, multidisciplinary and collaborative environment that offers a world of opportunities, come join us at DII.

The Role:

You will test, rework and debug printed circuit boards, build experimental setups for design testing of high-speed electromechanical assemblies for new product development. You will be a vital contributor to the development of new laser engraving and inkjet printing products and work in a new group of talented engineers within a well-established multinational company.

Job Responsibilities:
  • Debug and design validation of board and system level electronic designs
  • Design validation testing (major focus on electronics)
  • Conduct testing of mechanical, electrical, and optical components, subsystems and systems
  • Document experimental conditions and test results
  • Build prototypes and test fixtures; interface with external vendors for complex parts
  • Inspect incoming parts
  • Manage lab and lab equipment, including calibration
  • Effectively interact with other members of the technical team to create a safe, fun, and productive work environment
  • Design and verify cables
Job Requirements:
  • Minimum: an associate's degree and 10+ years of professional experience.
  • Experience reworking PCBs, solder to add or remove components
  • Experience with at least one data acquisition system
  • Use of lab equipment (Oscilloscope, DVM, Function generator, soldering station, etc.)
  • Ability to read and understand electrical schematics
  • Debug under the guidance of an Engineer
  • Attention to details
  • Eagerness to learn new skills and new tools
  • Excellent interpersonal, written, and oral communication skills
  • MSOffice tools
  • Altium designer (considered a plus)
  • Simple mechanical machining skills (considered a plus)
  • Some 3D mechanical CAD experience (considered a plus)
  • Programming of motor drives (considered a plus)
  • Jr. level layout and design of PCBs (considered a plus)
The right candidate will be aligned to our values and culture:
  • Collaborative entrepreneurial spirit
  • Winning through customers
  • High ethical standards, openness and trust
  • Expectations for results
  • Respect and value people

This position is eligible to earn a discretionary bonus based on performance metrics and other criteria outlined in our applicable bonus plan.

We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.

All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact keenehr@markem-imaje.com for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sr. Electrical Engineering Design Technician
Sr. Electrical Engineering Design Technician

Systech International • Salem (NH)

On-site
USD 90,000 - 120,000
Discretionary bonus eligibility
Sr. Electrical Engineering Design Technician
Sr. Electrical Engineering Design Technician

Dover Corporation • Salem (NH)

Hybrid
USD 95,000 - 140,000
Sr. Electrical Engineering Design Technician
Sr. Electrical Engineering Design Technician

Hydro Systems • Salem (NH)

On-site
USD 95,000 - 125,000
Electrical Engineer II
Electrical Engineer II

Hill Phoenix, Inc. • Salem (NH)

On-site
USD 80,000 - 110,000
Electrical Engineer II
Electrical Engineer II

Dover Corporation • Salem (NH)

Hybrid
USD 85,000 - 105,000
Senior Electronics Design & Test Technician
Senior Electronics Design & Test Technician

Hill Phoenix, Inc. • Salem (NH)

On-site
USD 90,000 - 130,000
Senior Electrical Design Tech: PCB Debug & Test Lead
Senior Electrical Design Tech: PCB Debug & Test Lead

Dover Corporation • Salem (NH)

Hybrid
USD 95,000 - 140,000
Pre-Sales Engineer
Pre-Sales Engineer

Anthony, Inc. • Anaheim (CA)

Remote
USD 46,000 - 69,000
Discretionary bonus
Pre-Sales Engineer
Pre-Sales Engineer

Markem-Imaje • Anaheim (CA)

Remote
USD 46,000 - 69,000
Field Service Representative - Louisville, KY
Field Service Representative - Louisville, KY

Dover Corporation • Louisville (KY)

On-site
USD 67,000 - 85,000