Shop Pipe Welder at Aerotek Charlotte, NC

Aerotek

Charlotte (NC)

On-site

USD 34,000 - 44,000

Full time

7 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Aerotek is hiring for welders. All shifts available in a fab shop in Charlotte, NC. Weld test will occur—1G Mig. Pay: $25.00-$32.00/hr.

Responsibilities include setting pump skids per drawings, aligning them to piping, installing trim components, mounting supports, and performing copper soldering and welding carbon and stainless steel. You will pass an on-site X-ray test before production and inspect welds for quality.

Qualifications

  • Experience in pipe welding or pipe fabrication.
  • Proficiency with MIG and/or TIG pipe welding techniques.
  • Demonstrated proficiency welding carbon steel and stainless steel pipe.
  • Ability to pass an on-site X-Ray weld test prior to begin production work.
  • OSHA 10 certification preferred.
  • Proficiency in reading and interpreting equipment drawings and manufacturer specifications.

Responsibilities

  • Set pump skids according to equipment drawings and manufacturer specifications.
  • Align skid-mounted pumps to various piping connections.
  • Install trim components on equipment and piping systems, including gauges, thermometers, air vents, drain valves, balancing valves, and unions.
  • Mount equipment supports, brackets, and vibration isolation pads.
  • Perform copper soldering and brazing tasks as required by project specifications.
  • Perform pipe welding in a fabrication shop setting across a material mix of approximately 70 percent carbon steel and 30 percent stainless steel.
  • Execute welds using MIG and/or TIG welding processes to meet project specifications and quality standards.
  • Successfully pass an on-site X-Ray weld test prior to start production work.
  • Inspect completed welds to ensure they meet acceptance criteria and applicable quality requirements.
  • Maintain a safe and organized work area in accordance with all applicable safety guidelines and shop procedures.
  • Adhere to production schedules and workmanship standards throughout all assigned tasks.
  • Supply standard hand tools and required personal protective equipment, including a welding helmet, jeans, and steel-toed boots at minimum.

Job description

Job Description

Aerotek is hiring for welders All shifts available - this is inside a fab shop Weld test will occur - 1G Mig Pay: $25-$32/hr

Job Responsibilities
  • Set pump skids according to equipment drawings and manufacturer specifications.
  • Align skid-mounted pumps to various piping connections.
  • Install trim components on equipment and piping systems, including gauges, thermometers, air vents, drain valves, balancing valves, and unions.
  • Mount equipment supports, brackets, and vibration isolation pads.
  • Perform copper soldering and brazing tasks as required by project specifications.
  • Perform pipe welding in a fabrication shop setting across a material mix of approximately 70 percent carbon steel and 30 percent stainless steel.
  • Execute welds using MIG and/or TIG welding processes to meet project specifications and quality standards.
  • Successfully pass an on-site X-Ray weld test prior to start production work.
  • Inspect completed welds to ensure they meet acceptance criteria and applicable quality requirements.
  • Maintain a safe and organized work area in accordance with all applicable safety guidelines and shop procedures.
  • Adhere to production schedules and workmanship standards throughout all assigned tasks.
  • Supply standard hand tools and required personal protective equipment, including a welding helmet, jeans, and steel-toed boots at minimum.
Essential Skills
  • Experience in pipe welding or pipe fabrication.
  • Proficiency with MIG and/or TIG pipe welding techniques.
  • Demonstrated proficiency welding carbon steel and stainless steel pipe.
  • Ability to pass an on-site X-Ray weld test prior to begin production work.
  • OSHA 10 certification preferred.
  • Proficiency in reading and interpreting equipment drawings and manufacturer specifications.
Job Type & Location

This is a Contract to Hire position based out of Charlotte, NC.

Pay and Benefits

The pay range for this position is $25.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

  • Medical, dental & vision
  • Critical Illness, Accident, and Hospital
  • 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available
  • Life Insurance (Voluntary Life & AD&D for the employee and dependents)
  • Short and long-term disability
  • Health Spending Account (HSA)
  • Transportation benefits
  • Employee Assistance Program
  • Time Off/Leave (PTO, Vacation or Sick Leave)
Application Deadline

This position is anticipated to close on Nov 18, 2026.

Workplace Type

This is a fully onsite position in Charlotte,NC.

About Aerotek

Aerotek Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

Equal Opportunity

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welder & Fabricator
Welder & Fabricator

Aerotek • Henderson (CO)

On-site
USD 33,000 - 39,000
Weekly pay
Medical, dental & vision
401(k) plan
+6
Welder- Subarc
Welder- Subarc

Aerotek • Houston (TX)

On-site
USD 33,000 - 44,000
Medical, dental & vision
401(k) retirement plan
Life Insurance
+2
Pipe Welder
Pipe Welder

Aerotek • Houston (TX)

On-site
USD 69,000 - 83,000
Weekly pay
Medical, dental & vision
401(k) Retirement Plan
+1
TIG/MIG Welder
TIG/MIG Welder

Aerotek • Spartanburg (SC)

On-site
USD 30,000 - 39,000
Weekly pay
Medical, dental & vision
401(k) plan
+2
Welder And Fabricator at Aerotek Mount Joy, PA
Welder And Fabricator at Aerotek Mount Joy, PA

Aerotek • Mount Joy

On-site
USD 39,000 - 48,000
Medical, dental & vision
401(k) Retirement Plan
Time Off/PTO
+1
Welder And Fabricator
Welder And Fabricator

Aerotek • Lancaster

On-site
USD 39,000 - 48,000
Medical, dental & vision
401(k) retirement plan
Life insurance
+5
MIG Welder at Confidential Brooklyn Park, MN
MIG Welder at Confidential Brooklyn Park, MN

Confidential • Brooklyn Park (MN)

On-site
USD 36,000 - 41,000
Medical, dental & vision
401(k) Retirement Plan
Life Insurance
+1
Entry Level Welder
Entry Level Welder

Aerotek • Colorado

On-site
USD 27,000 - 28,000
Weekly pay
Medical, dental & vision
401(k)
+1
Welder Fabricator
Welder Fabricator

Aerotek • Memphis (TN)

On-site
USD 41,000 - 48,000
Medical benefits
401(k) plan
Weekly pay
Welder
Welder

Aerotek • Sedro-Woolley (WA)

On-site
USD 34,000 - 55,000