Sheetmetal Structural Mechanic 1 - Cherokee Wings -1st Shift

Piper Aircraft Inc

Vero Beach (FL)

On-site

USD 30,000 - 41,000

Full time

25 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Piper Aircraft Inc. is recruiting a Sheet Metal Structural Mechanic I for Cherokee Wings on the 1st shift. You will assist in producing high-quality aircraft parts following Piper drawings, PPS, and instructions, while supporting schedules and resource use.

Responsibilities include assembling wings and fuselages, drilling and fitting critical joints, inspecting with Piper certifications, and driving continuous improvement. OSHA and FAA compliance awareness is expected.

Qualifications

  • High school diploma or equivalent required; additional technical training or hands-on experience valued.
  • Sheet Metal Structural Mechanic I experience or related sheet metal experience preferred, with progression paths listed.
  • Experience with hand and power tools and reading manufacturing drawings (Piper drawings) is expected.

Responsibilities

  • Assemble aircraft sheet metal wings and fuselages, including critical joints and alignment.
  • Drill, fit, trim, and fitment of mating parts to tolerances.
  • Inspect assemblies using Piper inspection certifications and maintain QAM/QIM compliance.
  • Troubleshoot and perform repairs per MRB and standard repair procedures.
  • Coordinate with other departments to address quality concerns and improve productivity.
  • Train teammates and support continuous improvement initiatives to reduce defects and improve throughput.

Skills

Sheet metal work
Quality inspection
Reading drawings
Hand tools
Measuring/QA tools

Education

High school diploma or equivalent
Aircraft Sheet Metal Mechanic program (preferred)

Tools

Hand tools
Power tools
Calipers/Measuring tools

Job description

Sheetmetal Structural Mechanic 1 - Cherokee Wings -1st Shift (Full Time)
Department: All Openings

Sheet Metal Structural Mechanic I -Cherokee Wings - 1st Shift

Assists the Supervisor in the production of high-quality aircraft parts & assemblies following Piper Drawings, Process Specifications (PPS) and other manufacturing instructions. Assists in meeting or exceeding planned production and delivery schedules while maximizing company resources to achieve company goals.

Essential Job Functions: Performs or assists the Supervisor in the following tasks:

Assemble aircraft sheet metal structural wings and fuselages including mating stress critical joints, areas requiring critical close tolerance holes

Hand, locate and drill, as well as trim critical mate joints of fuselages and wings, and other critical operations as needed

Performs at a high level of quality and productivity. Assists other teammates to achieve a high level of quality and productivity.

Inspecting and buying off all assemblies in the department using Piper inspection certifications.

Maintain departmental compliance with Piper QAM/QIM and FAA requirements.

Interface with other departments regarding quality concerns to resolve expeditiously and in a cost-effective manner.

Troubleshoot and re-work all major discrepancies as necessary. Primary point of contact for performing major and regular Material Review Board repairs, Standard repairs and modifying aircraft due to customer or design directed changes.

Act as the technical liaison between Pipers Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate.

Conduct or coordinate training and cross training of teammates to attain acceptable levels of performance.

Drive continuous improvement efforts to enhance the teams performance including schedule delivery performance, reduction of late work, elimination of quality defects & scrap, increasing productivity and generating cost reductions. Assists with data collection, review and report generation.

Work with other manufacturing areas to ensure production readiness for design changes. Provides assistance when required during new product development, design, build and testing. This may periodically involve augmenting Experimental Flight Test Department in a variety of capacities in order to achieve critical program milestones.

Ensure the department maintains compliance with Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned program requirements.

Audit all departmental programs for effectiveness

Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity.

Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs.

Perform duties as assigned by supervision

Career Path Minimum Position Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

  • High school diploma or equivalent; additional education, technical training, or relevant hands-on experience may be considered in lieu of formal education requirements.
  • Related sheet metal structural mechanic experience requirements:
  • Sheet Metal Structural Mechanic I: 1-2 years of Structural Assembler experience
  • Sheet Metal Structural Mechanic II: 2 – 5 years of Mechanic experience
  • Senior Sheet Metal Structural Mechanic: ≥ 5 years of Mechanic experience
  • Successful completion of Aircraft Sheet Metal Mechanic program preferred.
  • Experience using hand and power tools.
Physical Demands

Demonstrates physical and functional ability to perform full anatomical range of motion to accomplish tasks. Evidence of visual and aural acuity and finger and hand dexterity to operate job specific equipment. Can withstand long periods of sitting, standing and/or constant walking. Ability to lift and carry up to 35 lbs. Other physical requirements include the ability to bend, kneel, crouch, twist, balance and reach above, out, and below.

Mental Demands

Ability to foster collaborative relationships, to work well under pressure, to organize and synthesize new information, and prioritize tasks. Possesses critical thinking, analytical skills and flexibility. Ability to multi-task. Required detailed attention to work in an environment where interruptions need to be controlled. Demonstrates sensitivity to customer needs and expectations.

Working Conditions

Environmental Demands and Exposure to Hazards: Works primarily inside and may occasionally work outdoors. May be exposed to odors, chemical agents, dust, fumes, gases, sharp objects, hazardous or moving equipment, wet slippery floors, and extremes in temperature and humidity.

Interacts regularly with various staff and employees, and occasionally with vendors, suppliers, community members and regulatory agency representatives.

Operational Excellence

Supports all operational excellence initiatives ensuring full participation in all department services, continuous improvement efforts, and training programs.

Quality Assurance

Maintains a safe, orderly working environment including FOD compliance

Ensures that Piper Aircraft, Inc. corporate compliance policies are adhered to

Adheres to organization and department policies and procedures

Compliance

Responsible for ensuring compliance with laws, rules and regulations appropriate to job function.

Comply with all organizational policies and standards regarding ethical business practices.

Work ethically and with integrity; upholds organizational values.

Maintains compliance with company safety policies and procedures, OSHA, and EPA regulations including Personal Protective Equipment (PPE), behaviors, physical space and hazardous waste disposal procedures.

Communicates Effectively

Delivering timely communications that convey a clear understanding of the unique needs of different information exchanges related to functional tasks, workplace initiatives, requirements, and cross functional interactions.

Decision Quality

Makes good and timely decisions that keep the organization moving on time with deliverables

Knows and contributes the most effective and efficient processes to get things done, with a focus on continuous improvement.

Attention to Detail

Takes responsibility for a thorough, accurate, and detailed method of completing work tasks

Drives Results

Overcomes adversity, consistently achieving quality results - even under demanding deadlines and unexpected operating circumstances

Teamwork

Interacts, partners, and collaborates effectively with others, positively contributing to overall department and organizational deliverables and results.

Please note - This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week including mandatory overtime may be required.

American with Disability Act Requirements: External and Internal applicants, as well as position incumbents, must be able to perform the essential position responsibilities as listed in this poition description either aided or unaided or with the assistance of a reasonable accommodation to be determined by the organization on a case-by-case basis.

All job requirements listed indicate the minimum level of knowledge, skills and ability deemed necessary to perform the job proficiently. This job description is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Employees will be required to perform other job-related instructions given by their supervisor, subject to reasonable accommodations.

Piper Aircraft is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, age, national origin, gender, sex, gender identity, gender expression, sexual orientation, veteran status, disability, genetic information, or any other characteristic protected by federal, state or local law.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sheet Metal Structural Assembler I - Cherokee Fuselage - 1st Shift
Sheet Metal Structural Assembler I - Cherokee Fuselage - 1st Shift

Piper-Aircraft-Inc • Vero Beach (FL)

On-site
USD 42,000 - 56,000
Sheet Metal Structural Assembler/Mechanic - Malibu
Sheet Metal Structural Assembler/Mechanic - Malibu

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 42,000 - 64,000
Sheetmetal Structural Assembler II - Cherokee Final - 2nd Shift
Sheetmetal Structural Assembler II - Cherokee Final - 2nd Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 52,000 - 76,000
Sheet Metal Subassembler I - ERCO 1st Shift
Sheet Metal Subassembler I - ERCO 1st Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 42,000 - 65,000
Fiberglass Subassembler I - 1st Shift
Fiberglass Subassembler I - 1st Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 25,000 - 39,000
Manager, Manufacturing (Fabrication)
Manager, Manufacturing (Fabrication)

Piper-Aircraft-Inc • Vero Beach (FL)

On-site
USD 90,000 - 130,000
Machine Operator I - Press Room - Weekend Shift
Machine Operator I - Press Room - Weekend Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 25,000 - 33,000
Weekend shift
Manufacturing Manager
Manufacturing Manager

Piper Aircraft • Vero Beach (FL)

On-site
USD 90,000 - 130,000
Subassembler I - 1st Shift
Subassembler I - 1st Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 38,000 - 54,000
Aircraft Paint Shop Worker I - 2nd Shift
Aircraft Paint Shop Worker I - 2nd Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 40,000 - 56,000