Aircraft Paint Shop Worker I - 2nd Shift

Piper Aircraft Inc

Vero Beach (FL)

On-site

USD 40,000 - 56,000

Full time

25 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Piper Aircraft Inc. seeks an Aircraft Paint Shop Worker I for the 2nd shift to support painting of doors, panels, and components on aircraft parts and subassemblies.

Responsibilities include surface prep, masking, applying coatings, and performing touch-ups while ensuring safety, quality, and adherence to PPS and drawings.

Teamwork and attention to detail are essential as you coordinate with supervisors and senior staff to meet production schedules.

Qualifications

  • High school diploma or equivalent required.
  • 1–2 years of related Aircraft Paint Worker experience for level I or more.
  • Ability to work scheduled shift and overtime.
  • Follow safety procedures and PPS drawings/instructions.

Responsibilities

  • Prepare and paint door-jambs.
  • Carefully sand aircraft without damaging structure (skins and rivets).
  • Install and inspect lightning diverter strips.
  • Mix and apply filling compounds and sealants to fill gaps and joints.
  • Remove and temporarily install ailerons as required.
  • Apply initial coatings to small parts (wheel covers, gas caps, bezels).
  • Inspect torquing of components and support final inspection.

Skills

Attention to detail
Teamwork
Manual dexterity
Communication

Education

High school diploma or equivalent

Tools

Hand tools
PPE & respirators
Paint spray basics

Job description

Aircraft Paint Shop Worker I - 2nd Shift (Full Time)
Department: All Openings

Assists the Supervisor in the production of high-quality aircraft parts & subassemblies following Piper

Drawings, Process Specifications (PPS) and other manufacturing instructions. Assists in meeting or exceeding

planned production and delivery schedules while maximizing company resources to achieve company goals.

Essential Job Functions
  • Verify tire pressure per applicable specifications.
  • Prepare and paint door-jambs.
  • Complete basic removal and installation of rivets, including solid and pull rivets.
  • Carefully sand aircraft without damaging aircraft structure, including skins and rivets.
  • Install and inspect lightning diverter strips.
  • Install decorative vinyl graphics as required by signed paint scheme.
  • Perform final staking of hinge barrels as required.
  • Mix, and apply various filling compounds and sealants to fill and fair gaps, joints, steps, and low spots.
  • Remove and temporarily install ailerons as required for paint layout.
  • Apply initial coatings to small parts including wheel covers, closeouts, gas caps, bezels, etc.
  • Sand, prepare, and perform touch-up painting of solid colors on previously painted areas of small parts, or small areas of aircraft (i.e., landing gear doors, wheel wells, door handles)
  • Inspect and approve torquing of aircraft components. Occasionally approve torque applications completed by team mates.
  • Utilize specialized calibrated equipment for measuring pressures, orientation, torque, voltage etc.
  • Ability to obtain and maintain necessary Piper Acceptance stamps required for the position.
  • Assist quality control with final inspection and rework non-conformities as required.
  • Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity.
  • Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs.
  • Perform duties as assigned by supervision.
Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily.

The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

  • High school diploma or equivalent; or equivalent combination of education and experience in lieu of high school diploma.
  • Related Aircraft Paint Worker Experience Requirements:
  • Aircraft Paint Shop Worker I: ≥ 1 - 2 years of experience
  • Aircraft Paint Shop Worker II: ≥ 2 - 5 years of experience
  • Senior Aircraft Paint Shop Worker: ≥ 5 years of experience
  • Ability to work scheduled shift and hours, including overtime
  • Ability to work with minimal supervision
  • Ability to use hand tools, power tools, and PPE, including proper fit and use of respirators as required
  • Follow all safety procedures
  • Ability to demonstrate sound judgement and effective communication skills (written and verbal).
  • Adhere to Piper Drawings, Process Specifications (PPS) and other manufacturing instructions
Physical Demands

Demonstrates physical and functional ability to perform full anatomical range of motion to accomplish tasks. Evidence of visual and aural acuity and finger and hand dexterity to operate job specific equipment.

Can withstand long periods of sitting, standing and/or constant walking. Ability to lift and carry up to 35 lbs. Other physical requirements include the ability to bend, kneel, crouch, twist, balance and reach above, out, and below.

Mental Demands

Ability to foster collaborative relationships, to work well under pressure, to organize and synthesize new information, and prioritize tasks. Possesses critical thinking, analytical skills and flexibility. Ability to multi-task. Required detailed attention to work in an environment where interruptions need to be controlled. Demonstrates sensitivity to customer needs and expectations.

Working Conditions

Environmental Demands and Exposure to Hazards: Works primarily inside and may occasionally work outdoors. May be exposed to odors, chemical agents, dust, fumes, gases, sharp objects, hazardous or moving equipment, wet slippery floors, and extremes in temperature and humidity.

Interacts regularly with various staff and employees, and occasionally with vendors, suppliers, community members and regulatory agency representatives.

Operational

Supports all operational excellence initiatives ensuring full participation in all department services, continuous improvement efforts, and training programs.

Quality Assurance

Maintains a safe, orderly working environment including FOD compliance.

Ensures that Piper Aircraft, Inc. corporate compliance policies are adhered to.

Adheres to organization and department policies and procedures.

Compliance

Responsible for ensuring compliance with laws, rules and regulations appropriate to job function.

Comply with all organizational policies and standards regarding ethical business practices.

Work ethically and with integrity; upholds organizational values.

Maintains compliance with company safety policies and procedures, OSHA, and EPA regulations including Personal Protective Equipment (PPE), behaviors, physical space and hazardous waste disposal procedures.

Communicates Effectively

Delivering timely communications that convey a clear understanding of the unique needs of different information exchanges related to functional tasks, workplace initiatives, requirements, and cross functional interactions.

Decision Quality

Makes good and timely decisions that keep the organization moving on-time with deliverables.

Processes
  • Knows and contributes the most effective and efficient processes to get things done, with a focus on
  • Attention to Detail Takes responsibility for a thorough, accurate, and detailed method of completing work tasks
  • Drives Results Overcomes adversity, consistently achieving quality results - even under demanding deadlines and unexpected operating circumstances.
Teamwork

Interacts, partners, and collaborates effectively with others, positively contributing to overall department and organizational deliverables and results.

Please note - This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week including mandatory overtime may be required.

American with Disability Act Requirements: External and Internal applicants, as well as position incumbents, must be able to perform the essential position responsibilities as listed in this position description either aided or unaided or with the assistance of a reasonable accommodation to be determined by the organization on a case-by-case basis.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Small Parts Painter II - 2nd Shift
Small Parts Painter II - 2nd Shift

Piper-Aircraft-Inc • Vero Beach (FL)

On-site
USD 42,000 - 58,000
Fiberglass Subassembler I - 1st Shift
Fiberglass Subassembler I - 1st Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 25,000 - 39,000
Sheet Metal Subassembler I - ERCO 1st Shift
Sheet Metal Subassembler I - ERCO 1st Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 42,000 - 65,000
Sheet Metal Structural Assembler/Mechanic - Malibu
Sheet Metal Structural Assembler/Mechanic - Malibu

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 42,000 - 64,000
Manager, Manufacturing (Fabrication)
Manager, Manufacturing (Fabrication)

Piper-Aircraft-Inc • Vero Beach (FL)

On-site
USD 90,000 - 130,000
Machine Operator I - Press Room - Weekend Shift
Machine Operator I - Press Room - Weekend Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 25,000 - 33,000
Weekend shift
Sheetmetal Structural Assembler II - Cherokee Final - 2nd Shift
Sheetmetal Structural Assembler II - Cherokee Final - 2nd Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 52,000 - 76,000
Subassembler I - 1st Shift
Subassembler I - 1st Shift

Piper Aircraft Inc • Vero Beach (FL)

On-site
USD 38,000 - 54,000
Fiberglass Subassembler II - 2nd Shift
Fiberglass Subassembler II - 2nd Shift

Piper-Aircraft-Inc • Vero Beach (FL)

On-site
USD 42,000 - 54,000
Manufacturing Manager
Manufacturing Manager

Piper Aircraft • Vero Beach (FL)

On-site
USD 90,000 - 130,000