Sheet Metal Mechanic

University of Washington; Seattle (WA); Presencial; USD 67.000 - 89.000; Jornada completa

Descripción de la vacante

University of Washington’s Facilities Maintenance & Construction is seeking a Sheet Metal Mechanic on the Seattle campus. The role supports HVAC, architectural, and structural metal work across university facilities, reporting to the Maintenance Supervisor II.

Primary tasks include fabrication, installation, and repair of diverse metal components, with emphasis on safety and accuracy. Responsibilities include interpreting blueprints, performing welding with SMAW/GMAW/GTAW, and coordinating with

Formación

• Completion of an apprenticeship or journey status or four years of related work experience.
• Valid driver’s license may be required.
• Equivalent education/experience may substitute for minimum qualifications.

Responsabilidades

• Fabricate, install, modify, and repair diverse sheet metal components and systems.
• Layout, fabricate, and install HVAC components, fixtures, fittings, ductwork, and related systems.
• Work from blueprints, drawings, and specifications and interpret requirements.
• Welding and metal joining using SMAW, GMAW, GTAW, soldering, brazing, and cutting as needed.
• Coordinate with supervisors and coworkers to support project scope and safety requirements.
• Maintain safety practices and follow UW policies and procedures.

Conocimientos

Teamwork

Safety awareness

Systems knowledge

Educación

Apprenticeship or journey status in sheet metal

WABO Welding Certification

Herramientas

SMAW

GMAW

GTAW

Oxyacetylene cutting

Descripción del empleo

Job Description

UW Facilities Maintenance & Construction has an outstanding opportunity for a Sheet Metal Mechanic.

Work Schedule

• Full time, Monday through Friday, 6:55 a.m. to 3:25 p.m.
• This position is based at the Plant Services Building on the Seattle campus.

About This Opportunity

Reporting to the Maintenance Supervisor II and receiving day-to-day direction from the Sheet Metal Mechanic Lead, the Sheet Metal Mechanic performs journey-level fabrication, installation, alteration, and repair work on a wide range of metal components and systems across University facilities. The position supports construction and renovation projects involving HVAC, architectural, structural, and custom-fabricated metal systems and works collaboratively with supervisors, other trades, and campus partners to deliver safe, high-quality construction services in support of the University community.

Key Responsibilities – 100%

Sheet Metal Fabrication, Installation, and Repair

• Design, fabricate, install, modify, and repair diverse metal components and systems using stainless steel, galvanized and mild steel, aluminum, copper, brass, and other materials.
• Fabricate and install sinks, counters, trays, pans, shelving, casework, and other custom sheet metal components.
• Layout, fabricate, and install HVAC components, fixtures, fittings, ductwork, and related mechanical system components.
• Fabricate and install architectural and structural metal components, including decking, roofing, stairs, railings, ramps, metal buildings, tools, and other custom components.
• Perform work from blueprints, drawings, specifications, technical manuals, field measurements, and verbal instructions; interpret mechanical system requirements and modify designs as necessary to meet field conditions and applicable building, structural, welding, safety, and ADA requirements.
• Perform welding and metal joining using Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW), soldering, brazing, plasma arc cutting, oxyacetylene cutting, and other appropriate methods.

Equipment and Material Operations

• Operate sheet metal fabrication equipment, including shears, brakes, drill presses, grinders, punches, hydraulic presses, and other shop and field equipment required to fabricate and install components.
• Operate forklifts, scissor lifts, high rangers, UW vehicles, and other equipment; load, unload, handle, transport, and stage personnel, materials, tools, equipment, and supplies necessary to perform assigned work.

Work Coordination and Customer Service

• Coordinate work with leads and supervisors, including proposed project changes, work progress, material and equipment needs, and conditions affecting project scope or completion; may provide work direction or instruction to semiskilled workers.
• Communicate and coordinate with other UW Facilities shops and campus partners, including EH&S, Engineering Services, Design Services, Project Delivery, and UW Information Technology, to facilitate assigned work and provide professional customer service.

Safety and General Responsibilities

• Perform work in accordance with applicable occupational health and safety requirements, including Safety Data Sheets (SDS), Hazard Review Checklists (HRCs), required personal protective equipment (PPE), and UW and UW Facilities policies and procedures.
• Participate in required meetings, training, process improvement activities, and other departmental initiatives.

Required Qualifications

To be considered for this opportunity your application must demonstrate you meet both the minimum qualifications and additional qualifications listed below. Equivalent education and/or experience may substitute for minimum qualifications except when there are legal requirements, such as a license, certification, and/or registration.

Minimum Qualifications

Applicants who do not meet these qualifications WILL NOT be forwarded to the Hiring Department.

• Completion of a recognized apprenticeship as a sheet metal mechanic; OR full journey status as a sheet metal mechanic in a union; OR four years’ applicable work experience. Vocational training may be substituted for work experience on a year-for-year basis.
• Possession of a valid motor vehicle operator’s license may be required.
• Equivalent education and/or experience may substitute for minimum qualifications except when there are legal requirements, such as a license, certification, and/or registration.

Preferred Qualifications

• Experience working effectively as part of a team, following direction, and communicating clearly with coworkers, supervisors, clients, and other stakeholders.
• Experience welding and cutting a variety of metals, including heavy plate and structural steel.
• Sheet Metal Welding and/or Structural Welding Certification from the Washington Association of Building Officials (WABO).
• Experience with architectural envelope systems and familiarity with Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA) standards and design guidance.
• Knowledge and practical experience with WISHA and OSHA requirements, and proficiency with standard productivity software such as Microsoft Office Suite or equivalent products.

Working Conditions

• Possession of a valid Washington State Driver’s License.
• Regular and predictable attendance is required.
• May be required to accept a variable work shift.
• Must be able to work in all weather conditions and in a smoke-free environment.
• Work may require access to confined spaces and heights using approved safety precautions.
• Ability to lift and move heavy materials may be required.
• Must be able to be fitted for and wear a respirator on the job.
• Must wear approved footwear while on the job.
• Must participate in medical screening/monitoring, such as TB screening and proof of measles inoculation, required for work assignments in locations including, but not limited to, nonhuman primate areas, the Animal Research and Care Facility, and UW Medical Center.

About UW Facilities

UW Facilities (UWF) manages the University’s buildings, infrastructure and land, with more than 1,100 employees in a diverse set of roles. Our organization is comprised of multiple groups including Operations, Asset Management, Campus Energy Utilities & Operations, and other smaller units. Operations is the largest group in UWF and has the most direct responsibility for ensuring the University is ready for business each day. Operations includes Building Services Department, Maintenance & Construction, Transportation Services, and Regulated Materials. https://facilities.uw.edu/units/operations

Maintenance & Construction (M&C) is responsible for general maintenance, repair, and renovations of all University of Washington (UW) main campus facilities including building interiors, exteriors, and grounds, as well as logistics, moving, and disposal of surplus equipment and furniture.

Compensation, Benefits And Position Details

Pay Range Minimum

$67,320.00 annual

Pay Range Maximum

$89,436.00 annual

Benefits

For an accounting of the benefits for this position, visit https://www.washington.edu/jobs/benefits-for-uw-staff/

Other Compensation

For information about benefits for this position, visit https://www.washington.edu/jobs/benefits-for-uw-staff/

Shift

First Shift (United States of America)

Temporary or Regular?

This is a regular position

FTE (Full-Time Equivalent)

100.00%

Union/Bargaining Unit

WFSE Skilled Trades

About The UW

Working at the University of Washington provides a unique opportunity to change lives – on our campuses, in our state and around the world. UW employees bring their boundless energy, creative problem-solving skills and dedication to building stronger minds and a healthier world. In return, they enjoy outstanding benefits, opportunities for professional growth and the chance to work in an environment known for its diversity, intellectual excitement, artistic pursuits and natural beauty.

Our Commitment

The University of Washington is committed to fostering an inclusive, respectful and welcoming community for all. As an equal opportunity employer, the University considers applicants for employment without regard to race, color, creed, religion, national origin, citizenship, sex, pregnancy, age, marital status, sexual orientation, gender identity or expression, genetic information, disability, or veteran status consistent with UW Executive Order No. 81.

To request disability accommodation in the application process, contact the Disability Services Office at 206-543-6450 or [e-mail].

Applicants considered for this position will be required to disclose if they are the subject of any substantiated findings or current investigations related to sexual misconduct at their current employment and past employment. Disclosure is required under Washington state law.