Senior Technical Advisor

Global Edge Group

Sabine Pass (TX)

Presencial

USD 120 000 - 180 000

Tempo integral

há 24 horas
Torna-te num dos primeiros candidatos

Uma candidatura completa num minuto

Currículo e carta de apresentação personalizados, prontos a enviar.

Ultrapassa os filtros ATS

Resumo da oferta

Global Edge Group seeks a Machinery Advisor: IV for LNG projects. You will act as a subject matter expert on machinery systems, with emphasis on Frame 7EA driven main refrigerant compressor strings in Train 1 and commissioning support for Train 2 and 3.

Responsibilities include developing reliability strategies, root cause analysis, and reviews of designs and maintenance plans, while ensuring compliance with API/ASME/ISO.

Qualificações

  • 10+ years of gas turbine experience. GE Frame 7EA experience is a plus.
  • Compressor or mechanical drive experience. Refrigerant compressor experience (LNG or olefins) is a plus.
  • Experience supporting operations, start-up or commissioning of a major facility or project.

Responsabilidades

  • Develop and implement strategies for machinery reliability, troubleshooting, and performance optimization to achieve production goals.
  • Conduct root cause analysis for equipment failures and deliver actionable recommendations to enhance system reliability.
  • Review and approve technical designs, maintenance plans, and operational procedures to ensure alignment with industry standards and best practices.
  • Lead audits, risk assessments, and machinery reviews to identify gaps and ensure compliance with health, safety, and environmental regulations.
  • Serve as the engineering support for critical rotating equipment, including gas turbines, centrifugal compressor, screw compressors, pumps, helper motors, and associated auxiliary systems.
  • Evaluate equipment operating data, vibration trends, process parameters, machinery performance, and condition monitoring information to identify emerging failure mechanisms and reliability risks
  • Review equipment operating envelopes, performance limitations, machinery protection systems, control logic, and operating procedures
  • Provide technical guidance for equipment repairs, overhauls, modifications, upgrades, and replacement strategies
  • Support the development of machinery operating limits, baseline performance data, vibration acceptance criteria, and initial condition monitoring requirement
  • Ensure machinery systems comply with applicable industry standards, including API, ASME, ISO, IEC, and relevant OEM requirements
  • Provide technical recommendations to management regarding equipment risks, operational constraints, reliability threats, and mitigation priorities
  • Project and commissioning: serve as technical bridge between the plant's Operations/ Engineering organizations and the project/commissioning teams responsible for the two trains under construction and commissioning.
  • Act as the primary machinery engineering liaison between the plant's Operations/ Engineering organizations and the project/commissioning teams responsible for the two trains under construction and commissioning.
  • Maintain visibility of commissioning activities, equipment readiness, technical issues, design changes, outstanding deficiencies, and startup progress
  • Proactively communicate relevant commissioning developments, equipment issues, lessons learned, and potential operational impacts to the machinery engineering group supporting the operating facility.
  • Ensure that technical knowledge gained during commissioning and startup is captured and transferred to the permanent Operations, Maintenance, and Engineering organizations.
  • Facilitate early involvement of Operation and Engineering personnel in commissioning activities, equipment reviews, and technical decisions that could affect long-term operability and maintainability.
  • Review and validate machinery commissioning procedures, startup and shutdown sequences, equipment operating procedures, and functional test requirement
  • Strengthen internal engineering capabilities through mentoring and development of entry- and mid-level engineers, promoting long-term technical competency and organizational knowledge retention by practical coaching, and hands-on involvement in machinery engineering activities.

Conhecimentos

Gas turbine experience
Frame 7EA experience
Compressor experience
Mechanical drive systems
Operations/start-up/commissioning

Descrição da oferta de emprego

Global Edge is an international staffing firm connecting projects worldwide with the industry’s most talented project professionals. We work with high level technical and commercial personnel across multiple industries including Oil and Gas, Energy, Renewables, Infrastructure, Automotive and Motorsports, IT, Marine, Mining, and more. With offices strategically located worldwide, Global Edge is known for the highest level of delivery for our clients and contractors.

Position Overview

Our team is currently looking for a Machinery Advisor: IV for one of our clients in the LNG Industry.

Serve as a subject matter expert on machinery systems (e.g., compressors, turbines, pumps, etc.), providing technical advice and solutions across LNG train and utilities, with primary focus on ops and maintenance support for Frame 7EA driven main refrigerant compressor strings in Train 1, and commissioning and start-up support for Train 2 ande Train 3 Frame 7EA mechanical drive units.

  • Develop and implement strategies for machinery reliability, troubleshooting, and performance optimization to achieve production goals.
  • Conduct root cause analysis for equipment failures and deliver actionable recommendations to enhance system reliability.
  • Review and approve technical designs, maintenance plans, and operational procedures to ensure alignment with industry standards and best practices.
  • Lead audits, risk assessments, and machinery reviews to identify gaps and ensure compliance with health, safety, and environmental regulations.
  • Serve as the engineering support for critical rotating equipment, including gas turbines, centrifugal compressor, screw compressors, pumps, helper motors, and associated auxiliary systems.
  • Evaluate equipment operating data, vibration trends, process parameters, machinery performance, and condition monitoring information to identify emerging failure mechanisms and reliability risks
  • Review equipment operating envelopes, performance limitations, machinery protection systems, control logic, and operating procedures
  • Provide technical guidance for equipment repairs, overhauls, modifications, upgrades, and replacement strategies
  • Support the development of machinery operating limits, baseline performance data, vibration acceptance criteria, and initial condition monitoring requirement
  • Ensure machinery systems comply with applicable industry standards, including API, ASME, ISO, IEC, and relevant OEM requirements
  • Provide technical recommendations to management regarding equipment risks, operational constraints, reliability threats, and mitigation priorities
  • Project and commissioning: serve as technical bridge between the plant's Operations/ Engineering organizations and the project/commissioning teams responsible for the two trains under construction and commissioning.
  • Act as the primary machinery engineering liaison between the plant's Operations/ Engineering organizations and the project/commissioning teams responsible for the two trains under construction and commissioning.
  • Maintain visibility of commissioning activities, equipment readiness, technical issues, design changes, outstanding deficiencies, and startup progress
  • Proactively communicate relevant commissioning developments, equipment issues, lessons learned, and potential operational impacts to the machinery engineering group supporting the operating facility.
  • Ensure that technical knowledge gained during commissioning and startup is captured and transferred to the permanent Operations, Maintenance, and Engineering organizations.
  • Facilitate early involvement of Operation and Engineering personnel in commissioning activities, equipment reviews, and technical decisions that could affect long-term operability and maintainability.
  • Review and validate machinery commissioning procedures, startup and shutdown sequences, equipment operating procedures, and functional test requirement
  • Strengthen internal engineering capabilities through mentoring and development of entry- and mid-level engineers, promoting long-term technical competency and organizational knowledge retention by practical coaching, and hands-on involvement in machinery engineering activities.
Qualifications (Education, Experience, & Skills)

Must-haves:

1. 10+ years of gas turbine experience. GE Frame 7EA experience is a plus.

2. Compressor or mechanical drive experience. Refrigerant compressor experience (LNG or olefins) is a plus.

3. Experience supporting operations, start-up or commissioning of a major facility or project.

Opportunity Employer. The Global Edge Group, LLC does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

LNG Machinery Advisor IV — Frame 7EA & Commissioning
LNG Machinery Advisor IV — Frame 7EA & Commissioning

Global Edge Group • Sabine Pass (TX)

Presencial
USD 120 000 - 180 000
Machinery Advisor: GE Frame 7EA
Machinery Advisor: GE Frame 7EA

The Bergaila Companies • Sabine Pass (TX)

Presencial
USD 168 000 - 226 000
Living allowance
Machinery Advisor: IV
Machinery Advisor: IV

Airswift • Sabine Pass (TX)

Presencial
USD 140 000 - 180 000
Machinery Advisor: IV
Machinery Advisor: IV

TalenXis • Sabine Pass (TX)

Presencial
USD 124 000 - 193 000
Shift Engineer
Shift Engineer

Power Systems Hanwha • Florida

Presencial
USD 110 000 - 160 000
Machinery Advisor IV
Machinery Advisor IV

TekWissen LLC • Sabine Pass (TX)

Presencial
USD 148 000 - 210 000
Principal Engineer, Rotating Equipment
Principal Engineer, Rotating Equipment

Venture Global LNG, Inc. • Houston (TX)

Presencial
USD 180 000 - 240 000
Principal Electrical Engineer
Principal Electrical Engineer

Global Edge Group • Houston (TX)

Presencial
USD 120 000 - 190 000
Product Service Engineer - Controls
Product Service Engineer - Controls

Venture Global LNG, Inc. • Houston (TX)

Presencial
USD 130 000 - 150 000
Senior Facilities Engineer - LNG & Turbomachinery
Senior Facilities Engineer - LNG & Turbomachinery

Ellaway Blues Consulting • Illinois

Presencial
Confidential