Senior RF Hardware Engineer

K2 Space Corporation

Los Angeles (CA)

Vor Ort

USD 120.000 - 200.000

Vollzeit

14 Tage+

Erhalte eine Antwort von diesem Arbeitgeber

Dein Lebenslauf und dein Anschreiben, genau auf das zugeschnitten, was gesucht wird.

Schaffe es an den ATS-Filtern vorbei

Benefits dieser Stelle

PTO
Medical coverage
Dental coverage
Parental leave

Zusammenfassung

K2 Space Corporation in Los Angeles is hiring a microwave/RF engineer to design and develop RF/microwave hardware for the company’s high-power satellite platforms.

You will architect, develop, test, and integrate RF electronics for software defined radio (SDR) systems used on space missions and collaborate with antenna, FPGA, DSP, software, mechanical, and electrical engineers to prototype and refine your designs.

Qualifikationen

  • Bachelor's degree in electrical engineering or related field.
  • 5+ years of experience in microwave and RF engineering.
  • Experience designing multilayer PCBAs and integrating COTS RF ICs in Altium or similar tools.
  • Experience with RF modeling/analysis software: Cadence AWR Microwave Office and Keysight ADS.
  • Experience with RF test equipment such as VNAs and spectrum analyzers.
  • Ability to work in a fast-paced, high-velocity startup atmosphere.

Aufgaben

  • Design and development of RF and microwave hardware from UHF 200 MHz through Ka-band 30 GHz, including antennas and amplifiers.
  • Design PCBAs for spacecraft including schematic, layout, and bring-up.
  • Qualify designs through environmental testing (vibration, shock, TVAC).
  • Collaborate with internal and external stakeholders to integrate designs into the spacecraft system.
  • Act as technical leader and mentor for the team.

Kenntnisse

5+ years RF engineering
Fast-paced startup
Multidisciplinary collaboration

Ausbildung

Bachelor's degree in electrical engineering

Tools

Altium
Cadence AWR Microwave Office
Keysight ADS
Vector network analyzers
PCB design

Jobbeschreibung

K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply.

The Role

You will be responsible for the design and development of radiofrequency (RF) and microwave electronics to be hosted on some of the largest, most powerful, rapidly designed and rapidly manufactured satellites ever deployed in space. In your first 6 months you will architect, develop, own, test, and integrate new RF electronics for use in software defined radio (SDR) systems for satellite communications and beyond. You will work with a multidisciplinary team of antenna, field programmable gate array (FPGA), digital signal processing (DSP), software, mechanical, and electrical engineers in order to prototype your systems and refine your designs. In your first two years you will have flown your system in space and developed cutting-edge radiofrequency systems.

Responsibilities
  • Design and development of radiofrequency and microwave hardware from UHF 200 MHz through Ka band 30 GHz, including phased array antennas, low noise amplifiers, power amplifiers, filters, RF mixers, up and downconverters, high speed data converters, and other RF electronics components
  • Design printed circuit board assemblies (PCBAs) for spacecraft including architecture, schematic capture, component selection, layout, bring up and debugging
  • Qualify your designs through environmental testing including vibration, shock, thermal, and thermal vacuum (TVAC) testing
  • Collaborate closely with internal and external stakeholders to integrate your designs into the spacecraft system
  • Act as technical leader and subject-matter expert helping to teach, grow, and mentor others in the team
Qualifications
  • Bachelor's degree in computer science, computer engineering, electrical engineering or related science, technology, engineering, or mathematics field
  • 5+ years of experience in microwave and RF engineering
  • Experience designing multilayer PCBAs and integrating commercial off-the-shelf integrated circuits for RF applications in Altium or similar PCB design tools
  • Experience with RF circuit modeling and analysis software tools such as Cadence AWR Microwave Office and Keysight ADS
  • Experience with RF test equipment such as vector network analyzers (VNA), spectrum analyzer, etc.
  • Ability to work in a fast-paced and high velocity start-up atmosphere
Nice to Have
  • Experience with component selection for use in space radiation environments and flying hardware in space
  • Experience with antenna and electromagnetic modeling and analysis software tools such as Ansys Electronics Desktop HFSS and Altair FEKO
  • Experience with FPGA design, implementation, verification, and validation for RF applications
  • Experience with software defined radio hardware development including high speed RF data converters (digital to analog and analog to digital converters), clock trees, and data converter interfaces
  • Experience with phased arrays and digital beamforming
  • Experience with signal intelligence (SIGINT), electronic warfare (EW), and/or satellite telecommunications
  • Knowledge of RF digital communications and digital signal processing (DSP) concepts such as spread spectrum, forward error correction, and modulation types such as BPSK, QAM, etc
Compensation And Benefits
  • Base salary range for this role is $120,000 - $200,000 + equity in the company
  • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level
  • Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks

If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged!

If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know.

Export Compliance

As defined in the ITAR, “U.S. Persons” include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a “U.S. Person.” The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a “U.S. person” as defined by 22 C.F.R.

  • 120.15 or otherwise eligible for a federally issued export control license.
Equal Opportunity

K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

RF Hardware Engineer
RF Hardware Engineer

K2 Space • Los Angeles (CA)

Vor Ort
USD 115.000 - 200.000
Equity in the company
Comprehensive benefits package including medical/dental/vision
Paid time off
Senior RF Hardware Engineer
Senior RF Hardware Engineer

K2 Space • Los Angeles (CA)

Vor Ort
USD 120.000 - 200.000
Equity
Medical/dental/vision coverage
Life insurance
+2
RF Avionics Systems Engineer
RF Avionics Systems Engineer

K2 Space Corporation • Los Angeles (CA)

Vor Ort
USD 100.000 - 150.000
Equity in the company
Comprehensive benefits
Paid time off
+1
RF Avionics Systems Engineer Hardware
RF Avionics Systems Engineer Hardware

Frontdoor Defense • Los Angeles (CA)

Vor Ort
USD 100.000 - 150.000
Principal RF Antenna Engineer, Top Secret Clearance
Principal RF Antenna Engineer, Top Secret Clearance

K2 Space Corporation • Los Angeles (CA)

Vor Ort
USD 200.000 - 270.000
RF Antenna Engineer
RF Antenna Engineer

K2 Space Corporation • Los Angeles (CA)

Vor Ort
USD 110.000 - 170.000
Equity in the company
Comprehensive benefits package
Principal RF Antenna Engineer
Principal RF Antenna Engineer

K2 Space Corporation • Los Angeles (CA)

Vor Ort
USD 200.000 - 270.000
Paid time off
Medical/dental/vision coverage
Life insurance
+1
Lead RF Avionics Engineer for Spacecraft Hardware
Lead RF Avionics Engineer for Spacecraft Hardware

Frontdoor Defense • Los Angeles (CA)

Hybrid
USD 100.000 - 150.000
RF Avionics Systems Engineer
RF Avionics Systems Engineer

K2 Space • Los Angeles (CA)

Vor Ort
USD 100.000 - 150.000
Equity
Paid time off
Medical/dental/vision coverage
+2
RF Test Engineer
RF Test Engineer

K2 Space • Los Angeles (CA)

Vor Ort
USD 100.000 - 150.000