Senior Project Engineer – Electrical Hardware – Full Time – Hybrid

Stanley Black & Decker, Inc.

Towson (MD)

Hybrid

USD 104,000 - 167,000

Full time

1 hour ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical, dental, life, vision
401(k) and Employee Stock Purchase
Paid time off and tuition assistance
Tool discounts

Job summary

Stanley Black & Decker, Inc. in Towson, MD is seeking a Senior Project Engineer – Electrical Hardware to join the Engineering team as a hybrid employee.

You will develop innovative electrical hardware for high‑volume products, focusing on electronics and brushless motor control platforms, coordinating across functions to drive platform development. You will lead design activities, set schedules, and ensure robust, production‑ready solutions while collaborating with suppliers and global teams to

Qualifications

  • Bachelor’s degree in Electrical Engineering or Electronics Engineering at a minimum.
  • 7+ years of electronics design experience in a relevant industry.
  • Broad hands‑on experience in electronics design within a high‑volume, competitive product environment.
  • Strong knowledge of PCB design and design for EMC.
  • Proficiency in schematic capture, PCB design, and simulation using Altium Designer or a similar software package.
  • Understanding of electronics manufacturing, design for high‑volume production, and fault‑tolerant design practices.
  • Hands‑on board‑level bring‑up and troubleshooting using oscilloscopes, probes, DMMs, thermal cameras, and lab tools.
  • Experience with embedded systems and motor/motion control is desired.
  • Knowledge in switch‑mode power supply design, motor controls, battery management, DFMEA, AC/DC systems, and brushless motors.
  • Excellent verbal, written, and presentation skills with global cross‑functional collaboration.
  • Ability to travel globally as needed.

Responsibilities

  • Work with Global Marketing, Engineering, Manufacturing, Quality, and Purchasing to drive platform designs across business units.
  • Lead R&D of electronic hardware designs for brushless motor control platforms on high‑volume products.
  • Direct new product and platform design, modify existing designs, and develop test procedures for production readiness.
  • Set deliverables, timelines, and communicate status to team leaders and stakeholders.
  • Identify major technical and schedule risks and drive actions to resolution.
  • Collaborate with suppliers and cross‑functional teams from concept through launch.

Skills

Electrical engineering background
Electronics design experience
PCB design
Altium Designer
Schematic capture
Motor control knowledge
EMC design practices
Embedded systems
Fault-tolerant design
Lab equipment hands-on bring-up
Travel availability

Education

Bachelor's degree in Electrical Engineering

Tools

Oscilloscopes
Voltage probes
Current probes
DMMs
Thermal cameras

Job description

Towson, Maryland, United States

Come make the world and accelerate your success. It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World™. Sound like you? Join our top-notch team of approximately 43,500 diverse and high-performing professionals globally who are making their mark on some of the world’s most beloved brands, including DEWALT®, BLACK+DECKER®, CRAFTSMAN®, STANLEY®, CUB CADET®, and HUSTLER®.

The Job:

As a Senior Project Engineer – Electrical Hardware, you’ll be part of our Engineering team working as a hybrid employee. In this role, you will support the development of innovative electrical hardware solutions for high-volume products, with a focus on electronics and brushless motor control platform design. You will work across cross‑functional teams to help drive platform development, execute technically complex projects, and deliver robust, production‑ready solutions that support world‑class product performance.

  • Work closely with Global Marketing, Engineering, Manufacturing, Quality, and Purchasing teams to drive platform designs that support product portfolios across multiple strategic business units.
  • Lead research and development of electronic hardware designs for brushless motor control platforms, supporting concurrent product development projects with a high degree of technical complexity.
  • Direct the design of new products and platforms, modify existing designs, improve production techniques, and develop test procedures that support performance, quality, and manufacturability.
  • Set deliverables, establish project timelines, and communicate status clearly to team leaders and key stakeholders.
  • Identify and communicate major technical and schedule risks in a clear, concise, and timely manner while driving appropriate actions to resolution.
  • Work closely with suppliers and serve as a key member of cross‑functional product development teams to ensure successful execution from concept through launch.
The Person:

You love to learn and grow and be acknowledged for your valuable contributions. You’re not intimidated by innovation. Wouldn’t it be great if you could do your job and do a world of good? In fact, you embrace it. You also have:

  • A Bachelor’s degree in Electrical Engineering or Electronics Engineering at a minimum.
  • 7+ years of experience in electronics design within a relevant industry.
  • A broad range of hands‑on experience in electronics design within a high‑volume, competitive product environment.
  • Strong knowledge of PCB design best practices and design for EMC.
  • Proficiency in schematic capture, PCB design, and simulation using Altium Designer or a similar software package.
  • Understanding of electronics manufacturing, design for high‑volume production, and fault‑tolerant design practices.
  • Hands‑on board‑level bring‑up and troubleshooting experience using equipment such as oscilloscopes, voltage and current probes, DMMs, thermal cameras, and equivalent lab tools.
  • Experience with embedded systems and motor/motion control systems is desired.
  • Knowledge in some or all of the following areas: switch‑mode power supply design, electric motor controls, lithium‑ion battery management, DFMEA, AC/DC systems, and brushless motors.
  • Excellent verbal, written, and presentation skills, with the ability to work effectively across functions and with global teams.
  • Ability to travel globally as needed.
The Details:

You’ll receive a competitive salary and a great benefits plan, including:

  • Medical, dental, life, vision, disability, 401(k), Employee Stock Purchase Plan, paid time off, and tuition reimbursement in addition to programs & benefits in support of your well‑being.
  • Discounts on Stanley Black & Decker tools and other partner programs.
And More:

We want our company to be a place you’ll want to be – and stay. Being part of our team means you’ll get to:

  • Grow: Be part of our global company with 20+ brands to grow and develop your skills along multiple career paths.
  • Learn: Have access to a wealth of learning resources, including our digital learning portal.
  • Belong: Experience an awesome place to work, where we have mutual respect and a great appreciation for a wide range of perspectives and experiences.
  • Give Back: Help us continue to make positive changes locally and globally through volunteerism, giving back, and sustainable business practices.

What’s more, you’ll get that pride that comes from empowering makers, doers, protectors, and everyday heroes all over the world. We’re more than the #1 tools company. More than a driving force in outdoor power equipment. More than a global leader in industrial. We’re visionaries and innovators. As successful as we’ve been in the past, we have so much further to go. That’s where you come in.

The Salary range for this position is $103,500.00 - $166,635.00

  • This is the lowest to highest annual full‑time salary range we would pay for this role at the time of this posting. The salary offered within the range may vary depending on multiple factors including job level, geographic location, job‑related knowledge, skills, qualifications, experience and in compliance with local wage requirements. Please note that salary is only one component of total rewards at Stanley Black & Decker.
  • The salary range listed in this job posting reflects the range for the primary location specified. The salary range may vary for other locations.
  • The successful candidate may be eligible for annual merit increases.
  • Medical, dental, life, vision, disability,401(k), Employee Stock Purchase Plan, paid time off, and tuition reimbursement in addition to programs & benefits in support of your well‑being.
  • Discounts on Stanley Black & Decker tools and other partner programs.

We Don’t Just Build The World, We Build Innovative Technology Too.

Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 43,500 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Build with us and take your career to new heights.

Who We Are

We’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state‑of‑the‑art smart factory products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn’t stopped us from evolving into a vibrant, diverse, global growth company.

What You’ll Also Get

Career Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.

Benefits & Perks

You’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.

Learning & Development:

Our lifelong learning philosophy means you’ll have access to a wealth of state‑of‑the‑art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).

Diverse & Inclusive Culture:

We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.

Purpose-Driven Company:

You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.

EEO Statement:

All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.

If you require reasonable accommodation to complete an application or access our website, please contact us at (860) 827-3923 or at accommodations@sbdinc.com. Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.

Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

This employer participates in the Work Opportunity Tax Credit (WOTC) program. Applicants may be asked to voluntarily provide information to determine eligibility. Any information provided will be kept confidentially other than as required to make the necessary WOTC disclosures and in accordance with applicable laws.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Manager, Public Relations
Senior Manager, Public Relations

Stanley Black & Decker, Inc. • Maryland

Hybrid
USD 96,000 - 154,000
Medical, dental, life, vision, and dis
401(k) and Employee Stock PurchasePlan
Paid time off and tuition-reimburse-
Mechanical Engineer
Mechanical Engineer

Stanley Black & Decker, Inc. • Elyria (OH)

On-site
USD 72,000 - 116,000
Medical insurance
Dental insurance
Vision insurance
+6
Business Development Manager, Systems - Hybrid - Troy, MI
Business Development Manager, Systems - Hybrid - Troy, MI

Stanley Engineered Fastening LLC • Michigan

Hybrid
USD 84,000 - 138,000
Medical, dental, life, vision
Disability insurance
401(k)
+5
Chief Engineer, Embedded Software – Full Time – Hybrid
Chief Engineer, Embedded Software – Full Time – Hybrid

Stanley Black & Decker, Inc. • Towson (MD)

Hybrid
USD 161,000 - 278,000
Medical, dental, life, vision
401(k) and ESPP
Paid time off
+1
Sr Business Analyst – Bilingual
Sr Business Analyst – Bilingual

Stanley Black & Decker, Inc. • Charlotte (NC)

Hybrid
USD 90,000 - 145,000
Medical coverage
Dental coverage
Life insurance
+6
Internal Communications Specialist – Tools & Outdoor (Remote)
Internal Communications Specialist – Tools & Outdoor (Remote)

Stanley Black & Decker, Inc. • Georgia

On-site
USD 52,000 - 83,000
Medical benefits
Dental benefits
Vision benefits
+7
Senior Program Manager
Senior Program Manager

Stanley Black & Decker • Towson (MD)

Hybrid
USD 90,000 - 145,000
Medical benefits
401(k) plan
ESPP
+2
Vice President Engineering, Maryland Design Center
Vice President Engineering, Maryland Design Center

Stanley Black & Decker, Inc. • Towson (MD)

On-site
USD 219,000 - 391,000
Medical, dental, life, vision
401(k)
Employee Stock Purchase Plan
+3
Engineering Director, Product Development
Engineering Director, Product Development

Stanley Black & Decker, Inc. • Towson (MD)

Hybrid
USD 134,000 - 232,000
Medical benefits
Dental benefits
Vision benefits
+3
Engineering Director, Product Development
Engineering Director, Product Development

Stanley Black & Decker • Towson (MD)

Hybrid
USD 134,000 - 232,000
Medical, dental, life, vision
401(k) and Employee Stock Purchase
Tuition reimbursement
+1