Senior PCB Designer

TTM Technologies, Inc.; Eatontown (NJ); On-site; USD 90,000 - 150,000; Full time

Benefits offered by this job

Health benefits

401k

Paid vacation & holidays

Job summary

TTM Technologies, Inc., a leading PCB designer, seeks a Senior PCB Designer to craft moderate to complex layouts for digital, analog, power and RF interconnects. You will use Siemens Xpedition, Cadence Allegro/OrCAD and Altium to ensure manufacturability. The role requires 5+ years of hands-on PCB design, related education, and IPC knowledge.

U.S. citizenship and DoD eligibility are required. You’ll collaborate with cross-functional teams to deliver high-quality boards for aerospace, defense and

Qualifications

• Minimum 5 years of hands-on PCB design experience with Xpedition, Allegro/OrCAD or Altium.
• Education: Associates in Electrical Design/Drafting or BS in Electronic Technology.
• Experience with IPC Class III design and manufacturing standards.
• U.S. citizenship required for ITAR/compliance.

Responsibilities

• Create PCB concept sketches and design layout estimates.
• Place and route components meeting electrical and physical specs.
• Collaborate with design reviews and engineering teams.
• Produce fabrication/drawings using CAD tools.
• Maintain ECN documentation and re-design records.
• Support manufacturing and quality procedures.

Skills

PCB design

Layout optimization

High-speed design

Education

Associates in Electrical Design/Drafting

BS in Electronic Technology

CID/CID++ Certification

Tools

Siemens Xpedition

Cadence Allegro/OrCAD

Altium

DxDesigner

Siemens BluePrint

CAM350

Job description

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer

About TTM

TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market.

Additional information can be found at www.ttm.com

Must have a background that would permit the U.S. Department of Defense (DoD) to issue a Secret Clearance, which includes US Citizenship.

TTM is an advanced-technology leader in highly sophisticated surveillance, communications analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage.

In this role, the Senior PCB Designer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, Cadence Allegro & Altium tool sets), detail design activities and value-engineering in support of internal TTM programs.

Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standard/s/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams.

Primary Responsibilities:

• PCB concept sketches for assistance in design layout estimating

• PCB design suggestions/trade-offs regarding initial engineering inputs

• Support changes to existing schematic diagrams using

TTM suite of tools: OrCAD, Altium and/or DxDesigner

• Place and route components ensuring that all electrical and physical

specifications meet the detailed design requirements for each PCB design.

• Utilization of Siemens Xpedition, Cadence Allegro and/or Altium required

• Participate in design reviews, interface with electrical, mechanical

manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures

• Collaborate on assigned projects closely with Si (Signal Integrity)

or various engineering disciplines, fellow designers and Program Management

• Provide layout feedback to design engineers as needed to ensure

functionality and manufacturability of PCB designs

• Create fabrication and assembly drawings utilizing native CAD tools and/or

Siemens BluePrint

• Generate all output files (ODB++) & PCB/CCA

documentation) required for the manufacture of the board and assembly

• Maintain Engineering Change (ECN) responsibilities on re-design and

documentation updates

Industry and TTM-specific electrical standards and methodologies-

• Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)

• Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards

• Exceedingly experienced with High-Speed PCB Design Constraints:

Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning

• Demonstrated experience with RF PCB routing complexities. Implement

layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures

• Direct design experience related to multi-layer CCA and Flex PCB technologies

• Current knowledge of -via/HDI layout methodologies and best practices

• Understanding of stack-up materials/construction along with impedance modeling requirements

Qualification/Knowledge/Skills Required:

• Experience: Minimum of 5 years' experience with primary hands-on demonstrated proficiency of Siemen's Xpedition (VX2.14 or later), Cadence Allegro/OrCAD (17.4 or later) and/or Altium product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary.

• Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 5-10 year track record.

• Related PCB design for the Aerospace and Defense sectors is highly desirable.

• CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.

• Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.

• Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.

• Background exposure in Valor (or similar) DFM TQ (Technical Query) report resolution from associated PCB location. Use of CAM software tools (i.e. - Siemen's CAM350, Siemens BluePrint) highly suggested.

• U.S. citizenship is required for this position due to ITAR requirements.

Work Environment and Physical Requirements:

• Mental Demands: Implement personal design recommendations and see projects through to completion. Recommend and implement improvements to processes increasing efficiency. The ability to communicate effectively by telephone (or online WebEx) while in group meetings and discussions. Capacity to give and receive information accurately and efficiently on a daily basis within the team environment is necessary. The capability to follow directions and procedures accurately, organization of facts and figures and apply arithmetic is essential.

• Physical Demands: Daily sitting focusing on and operation of a personal computer to enter data for over 60 minutes at a time

• Equipment Used and Necessary: Personal Computer, Printer, Telephone

• Environment: Office environment. Air conditioning, fluorescent lights

• Hours: Standard 40 working hours per business week.

#LI-PS1

#ADBU

Compensation and Benefits:

TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered.

Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is:$89,837 - $149,728

Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.