Senior Electrical Systems Engineer

Fresh Consulting

Bellevue (WA)

Hybrid

USD 170,000 - 185,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Fresh Consulting in Bellevue, WA, is seeking a Senior Electrical Systems Engineer to lead electrical and controls architecture for custom equipment on behalf of clients. You will translate client requirements into a traceable system architecture, guiding a small team of EEs and firmware engineers through design, integration, and test.

The role is full-time, hybrid out of Bellevue with on-site reviews and tests.

Qualifications

  • Bachelor’s degree in Electrical Engineering or related field.
  • 8+ years in electrical or hardware engineering, including 3+ years owning system-level architecture on a multi-disciplinary product.
  • Power distribution design experience for compute, industrial, or electrified equipment.
  • Embedded or industrial controls architecture experience: sensors, actuators, controllers, and comms buses.
  • Experience writing requirements, ICDs, and verification plans that other engineers build and test from.
  • Experience leading design reviews and guiding other engineers’ technical work.
  • Clear communication skills with clients, vendors, and non-specialists.

Responsibilities

  • Own the system requirements baseline and maintain traceability from requirement to design to verification.
  • Write and maintain ICDs between power, controls, compute, and cooling subsystems.
  • Run trade studies and document architectural decisions with rationale.
  • Define AC/DC power distribution, protection, and grounding for GPU servers, cooling, and controls.
  • Manage the electrical load analysis and power budget, and size feeds, PDUs, and power conversion.
  • Drive design for safety and code compliance (NEC, UL/IEC) with the client and certification partners.
  • Define the supervisory control architecture, sensor/actuator selection, and the full I/O map.
  • Set EE/firmware boundary: controllers, comms buses, telemetry, and fault handling.
  • Review schematics and firmware design for fit with the architecture.
  • Collaborate with mechanical/thermal engineers on cooling architecture and verify assumptions.
  • Write the integration and verification plan and lead bring-up and system test.
  • Lead the EE/firmware stand-up; guide 2–4 engineers and review work.
  • Present at client status meetings and design reviews; be the client’s main technical contact.
  • Manage technical relationships with silicon, power, and thermal vendors.
  • Flag technical risk and scope change to the program manager early.

Skills

System architecture
Power distribution
Embedded controls
Requirements writing
ICDs & verification
Technical leadership
Client/vendor communication
Team mentoring

Education

Bachelor’s degree in Electrical Engineering

Job description

We are Fresh. Together let’s build the future. With partners and clients, we practice strategy, design, development, and engineering to harness the power of technology and create what’s next.

Our cross-disciplinary approach blends human ingenuity and technology, empowering us to meet uncertainty with confidence. What got us to today won’t get us to tomorrow, so we test our assumptions and always strive for growth. From the products we build to the partners we collaborate with, we believe people make the difference.

And we do so as a workforce representative of the communities we serve, understanding that a diverse workforce strengthens our organization. We value diversity and support a positive and welcoming environment where all of our employees can thrive.

What are we looking for?

We seek a Senior Electrical Systems Engineer to lead the electrical and controls architecture for custom and novel equipment we design on behalf of our clients. You will bring deep experience in power distribution and embedded or industrial controls architecture, along with the systems-engineering rigor to own requirements, trade studies, and interface control documents on a multi-disciplinary hardware program.

In this role, you will be the technical lead for electrical and firmware on a multi-year GPU compute program, guiding a small team of Fresh EEs and firmware engineers through detailed design, integration, and test. You will also serve as the client’s day-to-day technical counterpart, working directly with silicon, power, and thermal vendors.

This is a full-time, exempt position, hybrid out of Bellevue, WA, with on-site time for design reviews, integration, and test. Reporting to the Electrical Engineering Manager, this starts as a technical‑lead assignment on a multi-year GPU compute program (approximately 35 hours/week, forecast through April 2028), transitioning to other Fresh hardware programs.

What will you be doing?

A Senior Electrical Systems Engineer at Fresh owns the electrical and controls architecture for custom and novel equipment built on behalf of our clients. The program is past requirements and concept architecture and is moving into detailed design and build, so you will be translating client requirements into a traceable system architecture that other engineers design and test from.

You will guide a small team of Fresh EEs and firmware engineers through detailed design, integration, and test, while serving as the client’s primary technical point of contact and managing relationships with silicon, power, and thermal vendors.

Key Responsibilities

Requirements and Systems Engineering:

  • Own the system requirements baseline and keep it traceable from requirement to design to verification.
  • Write and maintain interface control documents (ICDs) between power, controls, compute, and cooling subsystems.
  • Run trade studies and record architecture decisions with rationale.

Power System Architecture:

  • Define AC/DC power distribution, protection, and grounding for GPU servers, cooling, and controls.
  • Own the electrical load analysis and power budget, and size feeds, PDUs, and power conversion.
  • Drive design for safety and code compliance (NEC, UL/IEC) with the client and certification partners.

Controls and Embedded Architecture:

  • Define the supervisory control architecture, sensor and actuator selection, and the full I/O map.
  • Set the EE/firmware boundary: controllers, comms buses, telemetry, and fault handling.
  • Review schematics and firmware design for fit with the architecture.

Integration and Verification:

  • Work with mechanical and thermal engineers on cooling architecture, heat loads, and thermal-model assumptions.
  • Write the integration and verification plan and lead bring-up and system test.

Technical Leadership:

  • Lead the EE/firmware stand-up; assign, guide, and review work for 2–4 engineers.
  • Present at client status meetings and design reviews; be the client’s main technical contact.
  • Manage technical relationships with silicon, power, and thermal vendors.
  • Flag technical risk and scope change to the program manager early.

Skills and Qualifications

  • Bachelor’s degree in Electrical Engineering or a related field.
  • 8+ years in electrical or hardware engineering, including 3+ years owning system-level architecture on a multi-disciplinary product.
  • Power distribution design experience for compute, industrial, or electrified equipment, including load budgets, protection, and AC/DC conversion.
  • Embedded or industrial controls architecture experience: sensors, actuators, controllers, and comms buses (CAN, Modbus, Ethernet, or similar).
  • Experience writing requirements, ICDs, and verification plans that other engineers build and test from.
  • Experience leading design reviews and guiding other engineers’ technical work.
  • Clear communication skills with clients, vendors, and non-specialists.

Preferred Qualifications

  • Data‑center, edge‑compute, or GPU/accelerator server experience: rack power, liquid or air cooling, BMC and management interfaces.
  • MBSE or INCOSE practice (SysML, Cameo, or similar); INCOSE CSEP.
  • Enough thermal and HVAC knowledge to challenge cooling assumptions.
  • Product certification experience (UL, IEC, CE) for power or industrial equipment.
  • Consulting or agency experience where the client owns the product.

For a Washington‑State‑based role, the base salary hiring range for this position is $170,000 to $185,000. Compensation offered will be determined by factors such as location, level, job-related knowledge, skills, and experience.

Equal employment opportunity: All qualified persons will be considered for employment without regard to race, color, religion, sex, national origin, age, marital status, familial status, gender identity, sexual orientation, disability for which a reasonable accommodation can be made, or any other status protected by law. Assistance will be gladly provided upon request for any applicant with sensory or non‑sensory disabilities.

*Fresh Consulting is an E‑Verify participating company

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrical Engineering Manager
Electrical Engineering Manager

Fresh Consulting • Bellevue (WA)

On-site
USD 165,000 - 190,000
E-Verify participation
Electrical Engineering Manager
Electrical Engineering Manager

Fresh Consulting • Bellevue (WA)

On-site
USD 165,000 - 190,000
Senior Electrical Engineer
Senior Electrical Engineer

Fresh Consulting • Redmond (WA)

On-site
USD 103,320 - 117,096
Employee benefits at 100%
Medical
PTO
+2
Senior Electrical Engineer
Senior Electrical Engineer

Fresh Consulting • Bellevue (WA)

On-site
USD 130,000 - 150,000
Competitive salary
Comprehensive benefits plan
401k with partial matching
+2
Sr Robotics Systems Engineer
Sr Robotics Systems Engineer

Fresh Consulting, Inc • Bellevue (WA)

On-site
USD 150,000 - 190,000
Senior Electrical Systems Lead for GPU Compute & Controls
Senior Electrical Systems Lead for GPU Compute & Controls

Fresh Consulting • Bellevue (WA)

Hybrid
USD 170,000 - 185,000
Senior Electrical Engineer
Senior Electrical Engineer

Fresh Consulting • San Francisco (CA)

On-site
USD 103,000 - 117,000
Medical benefits 100%
PTO
Holiday Pay
+1
Sr Robotics Systems Engineer
Sr Robotics Systems Engineer

Fresh Consulting • Bellevue (WA)

On-site
USD 120,000 - 160,000
Senior Electrical Engineer
Senior Electrical Engineer

Fresh Consulting • Sunnyvale (CA)

On-site
USD 103,000 - 117,000
Medical benefits
PTO
Holiday pay
+1
Electrical Design Verification Engineer
Electrical Design Verification Engineer

Fresh Consulting, Inc • Redmond (WA)

On-site
USD 103,000 - 117,000
Medical benefits
PTO
Holiday pay
+1