Senior Electrical Engineer IV - Communications

High Power Media Ltd

Carpentersville (IL)

On-site

USD 110,000 - 125,000

Full time

4 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Profit Sharing Bonus
Vacation: 120 hours

Job summary

OTTO Engineering, based in the United States, is seeking a Senior Electrical Engineer IV to design circuitry for Communications and Power Management products from concept through production. You will lead analog/digital circuits, mentor junior engineers, and collaborate with cross‑functional teams to bring rugged, battery‑powered electronics to field use.

Ideal candidates have 10+ years in product development, experience with MCU peripherals, sensor interfaces, Bluetooth/USB protocols, and

Qualifications

  • Minimum of 10 years of concept‑through‑production product development.
  • Proficiency in electronic circuit design of digital and analog/audio circuits with bring‑up skills and HW/SW integration.
  • Experience in microprocessor peripheral interfaces (SDIO, I2C, SPI, RS232, Parallel and Serial/UART, JTAG).
  • Experience with sensor selection (GPS, Accelerometer, IMU) and audio interface/design.
  • Strong understanding of Bluetooth, USB, and connectivity protocols.
  • Knowledge of battery charging circuits and batteries; EMC/ESD considerations.
  • Altium or equivalent schematic/layout CAD experience; ability to mentor juniors.
  • Excellent communication and teamwork; self‑starter, capable of independent work.

Responsibilities

  • Lead full product development life‑cycle from concept to production and field support.
  • Create technical specifications from internal and customer requirements.
  • Drive architecture, design, prototyping, and test strategy.
  • Lead component research, selection, and validation.
  • Design digital interface logic, sensors, peripherals, microprocessors, memory, etc.
  • Design analog circuitry including power supplies and battery monitoring/charging.
  • Generate schematics using Altium and guide PCB routing for high‑speed interfaces.
  • Lead bring‑up, debugging, and validation of analog/digital designs.
  • Define test plans and end‑of‑line functional testing requirements.
  • Collaborate with Sales, Quality, Mechanical, Firmware, and Manufacturing engineers.

Skills

Circuit design (digital & analog)
Microprocessor peripherals
Bluetooth/USB protocols
Schematic/PCB layout
Team collaboration
Independent / lead engineer
Problem solving

Education

BSEE

Tools

Altium CAD

Job description

Why join OTTO Engineering?
  • At OTTO, we don’t just manufacture products—we engineer mission‑critical solutions with precision and pride. Our Communications Division designs and manufactures ruggedized, application‑specific communication systems built to perform when failure isn’t an option, serving the military, law enforcement, public safety, and industrial customers worldwide.
  • As a core value, we focus on delivering for our customers through innovative technology, superior quality, value, and responsiveness … as a result, our growth continues!
  • Employees are our greatest asset, which is why we share our company’s profits to celebrate our collective success.
  • As a privately‑owned company, we are proud to invest significantly in our community and in our own growth, focusing on long‑term business success.
  • We are proudly American!
You’ll love our Engineering Team!

Join a team where your engineering talent directly supports the people who protect and serve. At OTTO Engineering, we design and build innovative communications and power‑management products used by Public Safety professionals and Military teams around the world. You’ll help create rugged, reliable, and innovative products that professionals depend on every day. If you’re excited by meaningful engineering challenges and the chance to build technology that truly matters, this role is a great fit.

Specifically, we are seeking experience with …
  • Product development from implementing feature requirements through production including designing for manufacturability
  • Electronic circuit design of digital and analog/audio circuits with bring‑up skills & integration of initial HW/SW
  • Microprocessor peripheral interfaces (SDIO, I2C, SPI, RS232, Parallel and Serial/UART, JTAG)
  • Sensor selection (GPS, Accelerometer, IMU, etc.) and audio (speaker & mic) interface and design
  • Bluetooth, USB, and connectivity protocols

Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Our Senior Electrical Engineer IV will design circuitry for Communications and Power Management Products. Working on concept through production product development, as well as participate in the technical resolution of field and production issues. Prior experience in portable (battery powered) electronics, analog, audio, and digital circuitry is desired. The Senior Electrical Engineer IV should be able to work independently or be the lead engineer on a project. Ability to electrically architect new products and mentor junior Engineers. Degree of supervision required to perform job duties should not exceed 10%.

The Senior Electrical Engineer IV will:
  • Key contributor in the full product development life-cycle: concept, design, bring‑up, integration of initial HW/SW, factory support, test & validation, and customer support
  • Create technical specifications from internal and customer product requirements
  • Drive architecture, design, prototyping, and test strategy
  • Lead component research, selection, and validation
  • Design digital interface logic, sensors, peripherals, microprocessors, memory, etc.
  • Design audio circuits (A/D & D/A converters, audio power amps, op‑amps, etc.)
  • Design analog circuitry including filters, FETs, power supplies (linear and switchmode regulators), and battery monitoring & charging
  • Design and optimize circuits for minimal current drain consumption to maximize battery life
  • Generate schematics using Altium CAD. Provide guidance to a Printed Circuit Board Designer for routing, high speed interface, impedance matching, power routing, EMC Compliance, etc.
  • Generate Engineering Documentation: Schematics, BOMs, ECNs, Test Plans, and Specifications
  • Lead the electrical bring‑up, debug, and validation of analog and digital designs
  • Hands‑on design, troubleshooting, optimization, simulation, using oscilloscopes, DMM’s, and other test equipment
  • Define and execute performance tests, reliability tests, EMC testing, and field failure analysis
  • Define requirements for circuit board level testing & test‑coverage as well as of end‑of‑line functional product testing, including selection of test equipment
  • Collaborate with cross‑functional teams including Sales, Quality, Mechanical, Firmware, and Manufacturing Engineers, to ensure timely product development and performance
  • Conduct and participate in design reviews and DFMEAs
  • Ensure compliance with industry standards including collaboration with test labs and regulatory agencies
  • Help provide project timelines and cost estimates
  • Contribute to the development of Intellectual Property
  • Assist with other related duties as required or assigned
What you’ll need to bring to the table:
  • BSEE
  • U.S. Citizen
  • Minimum of 10 years of experience in concept-through-production product development
  • Proficiency in electronic circuit design of digital and analog/audio circuits with bring‑up skills & integration of initial HW/SW
  • Experience in product development from implementing feature requirements through production including designing for manufacturability
  • Experience in microprocessor peripheral interfaces (SDIO, I2C, SPI, RS232, Parallel and Serial/UART, JTAG)
  • Experience with sensor selection (GPS, Accelerometer, IMU, etc) and audio (speaker & mic) interface and design
  • Strong understanding of Bluetooth, USB, and connectivity protocols
  • Knowledge of battery charging circuits and batteries
  • Experience employing mitigation methods and techniques to address circuit noise, meet ESD standards, and EMC Compliance
  • Knowledge of some embedded software is not required, but a plus
  • Demonstrated ability to troubleshoot and analyze product failures, and apply test results to design improvements
  • Experience using a Schematic/Layout CAD tool (Experience with Altium is a plus)
  • Demonstrated ability to prioritize, meet deadlines, and contribute to multiple simultaneous projects
  • Excellent communication and teamwork skills are essential
  • Flexible, results‑oriented problem‑solver who is a self‑starter and who can work independently and as a member of a team
What OTTO offers for this specific position:

The hiring range listed in this posting is what we, in good faith, anticipate relying on when confirming a base salary for this position; exceptions may be considered for highly experienced candidates with multiple years of at-level experience.

  • Target base salary hiring range: $110,000 to $125,000, based on qualifications and experience.
  • Profit Sharing Bonus - OTTO believes that it’s fair to share the profits that the employees help to make; profit sharing is distributed to employees twice a year. OTTO’s profit sharing plan is paid at the discretion of the company and is not a guaranteed bonus or any part of a compensation plan.
  • Vacation: 120 hours - vacation time is earned on the anniversary date.
OTTO’s Benefits:
Health:
Medical Insurance-
  • HMO Plan
  • Standard PPO Plan
  • Enhanced PPO Plan
  • High Deducible PPO Plan
  • FSA, LFSA, and HSA
Dental Insurance-
  • Base Plan
  • Buy-Up Plan
Vision Insurance
401(k) with a company match
Life insurance:
  • Life/AD&D
  • Voluntary Life/AD&D
  • Short-Term Disability
  • Long-Term Disability
10 paid holidays
Company picnic
Holiday party

AND numerous OTTO celebrations throughout the year!

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrical Engineer II - Communications
Electrical Engineer II - Communications

OTTO Engineering, Inc. • Carpentersville (IL)

On-site
USD 80,000 - 95,000
Profit sharing bonus
80 hours vacation
Health insurance
+4
Electrical Engineer II Communications
Electrical Engineer II Communications

OTTO Engineering, Inc • Carpentersville (IL)

On-site
USD 75,000 - 85,000
Profit Sharing Bonus
Medical Insurance
Dental Insurance
+7
Electrical Engineer III - Communications
Electrical Engineer III - Communications

OTTO Engineering, Inc. • Carpentersville (IL)

On-site
USD 85,000 - 95,000
Profit Sharing Bonus
Health Insurance
401(k) with company match
+1
Senior Electrical Engineer IV - Communications
Senior Electrical Engineer IV - Communications

OTTO Engineering, Inc. • Carpentersville (IL)

On-site
USD 110,000 - 125,000
Health insurance
Vision insurance
401(k) with company match
+2
Project Manager II - Communications
Project Manager II - Communications

OTTO Engineering, Inc • Carpentersville (IL)

On-site
USD 80,000 - 100,000
Profit Sharing Bonus
Health insurance
401(k) with company match
+2
Embedded Systems Engineer - Controls
Embedded Systems Engineer - Controls

High Power Media Ltd • Carpentersville (IL)

On-site
USD 90,000 - 115,000
Profit Sharing Bonus
Vacation: 80 hours
Project Manager II - Communications
Project Manager II - Communications

OTTO ENGINEERING • Lakeville (MN)

On-site
USD 80,000 - 100,000
Profit Sharing Bonus
Vacation: 80 hours
Health Insurance
Senior Project Manager - Communications
Senior Project Manager - Communications

OTTO Engineering, Inc • Carpentersville (IL)

On-site
USD 105,000 - 125,000
Profit Sharing Bonus
Vacation 120 hours
401(k) with company match
+3
Project Manager II - Communications
Project Manager II - Communications

OTTO Engineering, Inc. • Carpentersville (IL)

On-site
USD 80,000 - 100,000
Profit sharing
Vacation time
Health insurance
+1
Embedded Systems Engineer - Controls
Embedded Systems Engineer - Controls

OTTO Engineering, Inc • Carpentersville (IL)

On-site
USD 90,000 - 115,000
Health Insurance
401(k) with company match
Profit Sharing Bonus
+1