Senior Electrical Engineer

Anduril; Waltham (MA); On-site; USD 146,000 - 191,000; Full time

Job summary

Anduril Industries is seeking an Electrical Engineer for the Space Imaging team to define and mature electrical architectures for space-qualified EO/IR sensor payloads. You will collaborate with firmware, mechanical, optical, and systems engineers to bring designs from concept to flight hardware.

The role emphasizes power distribution, EMI/EMC protection, high-speed interfaces, and radiation-tolerant selection, with opportunities to lead small teams and contribute to a wide mission set for

Qualifications

• Education: A Bachelor's in Electrical Engineering or a related technical field is typically required.
• 8+ years of experience designing power, interface, or mixed-signal electronics for space, airborne, or other harsh-environment defense systems.
• Experience with isolated DC/DC power conversion, EMI filters, and transient/over-voltage protection for low-voltage DC systems.
• Familiarity with MIL-STD-461/464 EMI/EMC design and test methods.
• Experience with connector selection, pin/harness definition, and derating per MIL-HDBK-1547A.
• Strong hardware debugging skills using lab equipment (oscilloscopes, multimeters, logic/protocol analyzers).
• Proficiency with schematic capture and circuit simulation tools; worst-case stress/derating analysis.
• US Person status is required to access export controlled data and obtain a U.S. Secret clearance.

Responsibilities

• Define and own the electrical architecture for EO/IR sensor payload assemblies, including power distribution, connector/harness interfaces, grounding/bonding, and communication interfaces.
• Design, analyze, and test isolated DC/DC power conversion, EMI filtering, inrush current limiting, and over-voltage/reverse-polarity protection for low-voltage DC systems.
• Select connectors, define pin assignments, perform wire/cable derating analyses, and establish shielding and isolation schemes to meet EMI/EMC requirements.
• Design and support high-speed Ethernet (10GbE) and discrete I/O (RS-422, I2C, SPI) interfaces between sensor electronics and host avionics.
• Support EMI/ESD qualification testing and ESD protection design.
• Radiation-tolerant (TID/SEU) component selection for space and tactical environments.
• Perform parts stress/derating analyses and support hybrid microelectronics selection for reliability.
• Collaborate with firmware, mechanical, optical, and systems engineers to integrate electrical designs into sensor payloads, including bring-up and verification testing.
• Develop and execute test procedures using lab equipment to validate designs against requirements.

Skills

Electrical Architecture

Power Electronics

EMI/EMC Design

Interface/Harness Design

High-speed Interfaces

MIL-STD-461/464

US Person Status

Security Clearance

Education

Bachelor's in Electrical Engineering

Tools

Schematic Capture

Circuit Simulation Tools

Lab Equipment (O-scope, DMM)

Altium/Cadence PCB Tools

Job description

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

ABOUT THE TEAM

The Anduril Imaging team develops state-of-the-art imaging systems across both hardware and software, deployed to tackle the most significant security challenges of America and its allies. The team is heavily involved in utilizing computer vision, perception, electro-optical, infrared, and sensor data to give our war fighters and allies an advantage.

ABOUT THE JOB

The Space Imaging team is seeking an Electrical Engineer to join the team. The Space Imaging team is responsible for all aspects of spaceborne EO/IR system development, from the ideation stage through initial production. In this role, you will work closely with an interdisciplinary technical team to define the electrical architecture of space-qualified EO/IR sensor payloads — including power distribution, connector/harness interfaces, EMI/EMC protection, and high-speed communication interfaces — build and test prototypes, and mature designs into flight hardware products. As needed, you will also lead small teams of engineers from concept through system definition and development.

WHAT YOU’LL DO

• Electrical Architecture: Define and own the electrical architecture for EO/IR sensor payload assemblies, including power distribution, connector/harness interfaces, grounding/bonding schemes, and communication interfaces.
• Power Electronics Design: Design, analyze, and test isolated power conversion, EMI filtering, inrush current limiting, and over-voltage/reverse-polarity protection circuitry for low-voltage DC payload power systems.
• Interface & Harness Design: Select connectors, define pin assignments, perform wire/cable and component derating analyses, and establish shielding, bonding, and isolation schemes to meet EMI/EMC requirements.
• Communication Interfaces: Design and support high-speed Ethernet (10GbE) and discrete I/O (RS-422, I2C, SPI) interfaces between sensor electronics and host avionics.
• EMC/ESD: Support EMI/EMC qualification testing (MIL-STD-461/464), and ESD protection design.
• Radiation Compliance: Radiation-tolerant (TID/SEU) component selection for space and tactical environments.
• Parts Stress & Reliability Analysis: Perform EEE parts stress/derating analyses and support hybrid microelectronics selection to ensure reliable operation across mission life.
• Hardware/Software Integration: Collaborate with firmware, mechanical, optical, and systems engineers to integrate electrical designs into sensor payload assemblies, including bring-up and verification testing.
• Testing and Validation: Develop and execute test procedures using lab equipment (oscilloscopes, power supplies, network analyzers, EMI test gear) to validate designs against functional and performance requirements.

REQUIRED QUALIFICATIONS

• Education: A Bachelor's in Electrical Engineering or a related technical field is typically required.
• Experience: 8+ years of experience designing power, interface, or mixed-signal electronics for space, airborne, or other harsh-environment defense systems.
• Power Electronics & Circuit Design: Experience designing isolated DC/DC power conversion, EMI filters, and transient/over-voltage protection circuits for low-voltage DC systems.
• EMI/EMC Standards: Familiarity with MIL-STD-461 and MIL-STD-464 (or equivalent) EMI/EMC design and test methods.
• Interface/Harness Design: Experience with connector selection, pin/harness definition, and parts/wire derating analysis (e.g., per MIL-HDBK-1547A or equivalent).
• Debugging Skills: Strong hardware debugging skills using standard lab equipment (oscilloscopes, multimeters, logic/protocol analyzers).
• Analysis Tools: Proficiency with schematic capture/circuit simulation tools and worst-case stress/derating analysis.
• US Person status is required as this position needs to access export controlled data
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience designing radiation-tolerant electronics and performing TID/SEU analysis for space systems
• Experience with high-speed digital/communication interfaces (10GbE, SERDES) and signal integrity analysis
• Familiarity with machine-vision/sensor communication protocols (e.g., GigE Vision)
• Experience with hybrid microelectronics packaging (MIL-PRF-38534) or similar high-reliability component standards
• PCB layout experience (e.g., Altium, Cadence) for mixed-signal or RF boards
• Familiarity with electro-optical/infrared sensor payload electronics (detector bias/readout, cryocooler drive electronics)
• Familiarity with embedded Linux/firmware interfaces to support electronics bring-up

US Salary Range

$146,000 - $191,000 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including:

At Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you’re supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits .

As set forth in Anduril Industries’s Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.