Senior Electrical Engineer

IBT

Baltimore (MD)

Presencial

USD 120.000 - 135.000

Jornada completa

Hace 11 días

Una candidatura completa en un minuto

Currículum y carta de presentación personalizados, listos para enviar.

Supera los filtros ATS

Ventajas ofrecidas por este puesto de trabajo

401(k) match
Health insurance
Dental insurance
Vision insurance
Paid time off
Paid holidays
Parental leave
Education assistance
Parking

Descripción de la vacante

IBT is seeking a Senior Electrical Engineer to own the electrical design of our prosthesis controllers, electrodes and battery systems. The role blends hardware leadership with embedded work and hands-on validation in a fast-moving, collaborative environment.

You will drive HW architecture from concept to production, mentor engineers, and coordinate with firmware, systems engineering and quality teams while applying risk analyses and design reviews to deliver robust, safe medical-grade devices.

Formación

  • Bachelor's degree in electrical engineering and 5+ years designing compact, battery-powered electronics that reached production.
  • Designed boards end to end yourself, from requirements and schematic through layout, bring-up and verification on mixed-signal products.
  • Power management for battery-powered electronics: switching regulators, battery charging and protection circuits.
  • Circuit simulation used to inform design decisions.
  • Strong bench skills: oscilloscopes, current measurement, power supplies and loads.
  • Embedded C/C++ on 32-bit microcontrollers with hardware bring-up and driver debugging.

Responsabilidades

  • Own the electrical architecture and design of IBT products.
  • Take new products from prototype to verified devices with design reviews and multi-unit verification.
  • Design schematics and PCB layouts in Altium for battery-powered boards.
  • Design power management and protection for external interfaces.
  • Implement ultra-low-power designs with Bluetooth Low Energy.
  • Develop hardware-firmware interfaces and review firmware touching hardware.

Conocimientos

Hardware design
Embedded C/C++
Driver development
System architecture
Technical leadership
Cross-functional work
Bench testing

Educación

Bachelor's in Electrical Engineering

Herramientas

Altium Designer
Jira
SPICE

Descripción del empleo

IBT is hiring a Senior Electrical Engineer to own the electrical design of our products: the controllers, electrodes and batteries behind EMG-based control of upper-limb prostheses, used by over 6,000 people in 46 countries, and new wearable sensing products we're developing from the ground up.

Location: Baltimore, MD, full-time on-site Reports to: Chief Executive Officer Works with: our firmware engineer, mechanical engineer, systems engineering, quality and production

We want a hands-on, hardware-first technical lead who works well with others. You will own the electrical architecture of our products, from power and sensing to the hardware-firmware interface, working within the system architecture set by systems engineering. You will take designs from concept and simulation to released, manufacturable boards, and trace faults across circuits, firmware, cables and the third-party devices our system connects to. The role leans toward hardware, with enough embedded depth to shape the firmware architecture alongside our firmware team, and it uses AI coding tools to speed up development and validation.

What you will work on
  • Next-generation controller hardware, including power architecture and connectivity
  • Battery charging and battery-management circuitry
  • Multi-channel biopotential (EMG) acquisition hardware
  • A new wearable sensing product, from prototype to verified device: high-density sensor arrays and a low-power electronics module
  • We share project details with finalists under a confidentiality agreement.
About the role

IBT is hiring a Senior Electrical Engineer to own the electrical design of our products: the controllers, electrodes and batteries behind EMG-based control of upper-limb prostheses, used by over 6,000 people in 46 countries, and new wearable sensing products we're developing from the ground up.

Responsibilities
Hardware design and architecture
  • Own the electrical architecture and design of IBT products (controllers, electrodes, batteries and wearable sensing systems), within the system architecture and requirements set by systems engineering
  • Take new products from proof-of-concept prototypes to verified devices: design selection, design reviews and multi-unit verification
  • Design schematics and high-density PCB layouts in Altium for small, mixed-signal, battery-powered boards
  • Design power management for battery-powered wearable electronics, including battery charging and management, and protection for external interfaces (ESD, reverse polarity, short circuits, hot-swap)
  • Design ultra-low-power wearable electronics: power budgets, sleep and wake strategies, onboard data logging and Bluetooth Low Energy
  • Design low-noise sensor front ends, from multi-channel biopotential (EMG) to high-density sensor arrays, and digital communication interfaces (I2C, SPI, UART, CAN, Bluetooth module)
  • Simulate circuits and confirm results on the bench
  • Select components, manage obsolescence and qualify replacements
Embedded systems development
  • Define the hardware and firmware interface, and review firmware that touches hardware: drivers, interrupts, timing, power states, bootloader and field updates
  • Work in C/C++ and Rust at the hardware-firmware boundary on STM32 (ARM Cortex-M) microcontrollers: board bring-up, drivers for connected devices, bootloaders, power management and sensor bring-up
  • Use AI coding tools (for example Claude Code) to speed up firmware development, test creation and validation, with an engineer reviewing and verifying every AI-generated change before it's merged, and help build shared practices for AI-assisted development and review across the team
  • Build test benches and scripts that automate characterization and regression testing
  • Review firmware changes before merge, and run formal verification protocols with the quality team
Test, characterization and investigation
  • Characterize new hardware: power-rail behavior, startup and transients, noise, thermal and battery behavior
  • Characterize and calibrate sensors across units: sensitivity, linearity, hysteresis, and drift
  • Run in-office pre-compliance testing (for example emissions screening, ESD and charging bench tests) ahead of external lab testing led by systems engineering
  • Characterize third-party devices that connect to our system (batteries, hands, wrists and elbows) and document compatibility
  • Lead electrical failure investigations for field returns, complaints and assembly defects, including hands-on debugging with clinicians and patients when needed
  • Write test protocols and reports, and maintain a library of investigations (notes, simulations and measurements) for the team
Documentation, manufacturing handoff and quality
  • Translate user needs into testable electrical design inputs, trace them to design outputs and verification, and author electrical verification protocols, including schematic and layout verification
  • Own electrical design outputs for the design history file: schematics, BOMs, design rationale and verification reports
  • Produce fabrication and assembly documentation for released boards
  • Review contract manufacturer and board-house feedback on your designs, with our design-transfer and quality team
  • Contribute to design reviews and risk analyses, and support electrical safety and EMC work (IEC 60601-1, IEC 60601-1-2, FCC Part 15)
Technical leadership and collaboration
  • Act as technical lead for electrical hardware: set direction, plan and estimate the hardware work, and run design reviews
  • Work closely with systems engineering, firmware, quality, production and outside partners to get products designed, verified and built
  • Work with academic and clinical research partners on grant-funded projects, and contribute technical sections to proposals and reports
  • Mentor engineers and interns in electronics, schematics, simulation and debugging
  • Review electrical work by other engineers and contractors
Qualifications
  • Bachelor's degree in electrical engineering or a related field, and 5+ years designing compact, battery-powered electronics (wearable, medical or similar) that reached production
  • Designed boards end to end yourself, from requirements and schematic through layout, bring-up and verification, on mixed-signal products that reached production
  • Power management for battery-powered electronics: switching regulators, battery charging and management, and protection circuits
  • Circuit simulation (SPICE or similar) used to make design decisions
  • Strong bench skills: oscilloscopes, current measurement, power supplies and electronic loads, rework and prototype assembly
  • Embedded C or C++ on 32-bit microcontrollers, including board bring-up, driver-level debugging and digital buses (I2C, SPI, UART, CAN)
  • Technical leadership: leading hardware projects or design reviews, and mentoring engineers in a collaborative team
  • A systems view: tracing a problem across hardware, firmware, cables and connected devices
  • Meticulous, organized work habits: clear documentation, written test protocols, and disciplined tracking of your own work (Jira or similar)
Preferred
  • Rust, or the willingness to learn it (part of our firmware is written in Rust)
  • Altium Designer
  • High-density PCB layout (fine-pitch BGA, microvias)
  • USB Power Delivery
  • Biopotential front ends (EMG or ECG)
  • Wearable sensor systems or high-density sensor arrays (resistive or capacitive)
  • Bluetooth Low Energy and low-power design
  • Medical device development under design controls (ISO 13485, IEC 62304)
  • Designing to IEC 60601-1 and IEC 60601-1-2, or other safety and EMC certification experience
  • Grant-funded R&D (SBIR, DoD or NIH)
  • Using AI coding tools in embedded development
Compensation and benefits
  • Salary: $120,000 to $135,000 per year
  • 401(k) with a 6% match
  • 100% employer-paid health, dental and vision
  • Self-managed PTO, 11 paid holidays and paid sick leave
  • Paid parental leave at full base pay: 12 weeks for the primary caregiver, 4 weeks for the secondary caregiver (up to $2,500 per week)
  • Professional development costs covered, and education assistance after 6 months
  • Parking at the Baltimore office covered
Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Senior Electrical Engineer / On-site
Senior Electrical Engineer / On-site

OpenBCI, Inc. • New York (NY)

Presencial
USD 125.000 - 175.000
401(k) match
Health insurance
Stock options
+2
Senior Firmware Engineer / On-site
Senior Firmware Engineer / On-site

OpenBCI, Inc. • New York (NY)

Presencial
USD 120.000 - 160.000
Health insurance
Dental insurance
Vision insurance
+4
Electrical Engineer Intern, Implant Embedded Systems
Electrical Engineer Intern, Implant Embedded Systems

Neuralink • San Francisco (CA)

Presencial
USD 41.000 - 55.000
Medical, dental, and vision insurance
Meals provided
Equity (RSUs)
+4
Senior Electronics Technical Program Manager
Senior Electronics Technical Program Manager

Echo Neurotechnologies • San Francisco (CA)

Presencial
USD 180.000 - 210.000
Stock options
401(k) matching
Senior Electrical Engineer
Senior Electrical Engineer

Echo • San Francisco (CA)

Presencial
USD 175.000 - 230.000
Stock options
401(k) program with matching
Competitive compensation
Senior Electronics Engineer
Senior Electronics Engineer

IronSite • San Francisco (CA)

Presencial
USD 225.000 - 300.000
Health benefits
Dental & Vision coverage
401(k) match
+2
Principal Electrical Engineer, Implant Electronics
Principal Electrical Engineer, Implant Electronics

Opto Biosystems • San Francisco (CA)

Presencial
USD 180.000 - 240.000
Healthcare
401k
PTO 20 days
+4
Electrical Engineer, Implant Embedded Systems
Electrical Engineer, Implant Embedded Systems

NeuroTechX • South San Francisco (CA)

Presencial
USD 110.000 - 238.000
Equity (RSUs)
401(k) plan
Parental leave
+4
Electrical Engineer Intern, Implant Embedded Systems
Electrical Engineer Intern, Implant Embedded Systems

Neuralink • Austin (TX)

Presencial
USD 41.000 - 55.000
Medical, dental, and vision insurance
Equity (RSUs)
401(k) plan
+4
Staff Electrical Systems Engineer
Staff Electrical Systems Engineer

Epia Neuro • Alameda (CA)

Presencial
USD 140.000 - 190.000
Competitive base salary with equity
100% healthcare coverage for you and/​
Generous vacation policy
+2