Sander/Grinder 1

Anchor Fabrication; Denton (TX); On-site; USD 18,000 - 26,000; Full time

Job summary

Paycom - ATS in Denton, TX is seeking a detail-oriented Quality Inspector to inspect work-in-process and final products, document findings, and escalate issues to the Quality Manager. The role requires reading blueprints, using gauges, and ensuring conformity to BOM and customer specs.

Responsibilities include performing inspections, maintaining calibration status of equipment, and coaching the production team on repair techniques to prevent nonconformities.

Qualifications

• Perform inspections and tests per customer specifications and company procedures.
• Using measuring instruments, equipment, and check gauges, evaluate or verify components requirements.
• Perform visual inspection to ensure components and assemblies meet customer defined appearance requirements.
• Perform visual verification to ensure all required components have been used in an assembly as required per BOM or other documentation.
• Verify standard work procedures (TIS) and process are being followed.
• Read blueprints to determine dimensions and tolerance specifications.
• Interface effectively with all levels of plant personnel.
• Might Perform Receiving Inspection of purchased material and components as required.
• Perform regular quality assessments of products in all stages of the manufacturing process as they are brought to the MRB area, to determine course of action to bring product to customer’s specifications.
• At all times, verifies that the calibration status of measuring and inspection equipment is up to date.
• Has the responsibility and authority to properly identify, quarantine, and report non-conforming product. Resolve quality-related issues in a timely manner.
• Participates in MRB reviews.
• Document inspection and rework/repair outcomes by logging work performed and its outcome.
• Be able to open in the system drawings, BOM, First Piece/t Last Piece Inspection sheets
• Perform surface repairs as per applicable surface repair TIS.
• Coach and teach the production team and Quality Inspectors about product repair techniques.
• As needed, will participates in the investigation of nonconformities and Corrective Actions to prevent reoccurrence.

Responsibilities

• Inspect product and record findings as required.
• Coordinate with Quality Manager on problem resolution and corrective actions.
• Coach production staff on repair techniques and inspection standards.
• Open system drawings, BOM, and inspection sheets as needed.
• Support MRB reviews and document outcomes of inspections and repairs.

Skills

Inspection skills

Blueprint reading

Quality assurance

Measurement instruments

Documentation

Communication

Tools

Calipers

Gauge equipment

BOM knowledge

Job description

Job Details: Job Location: Denton, TX - Denton, TX 76207, Salary Range: $16.00, The Grinder/ Sander will inspect work-in-process and final product to ensure that a quality product is being delivered to our customers. This person will inspect product, record findings, and takes the necessary steps to bring the product to specification. Documents repairs and initiates action for problem resolution, including communicating findings and consulting with the Quality Manager. Other duties may be assigned by management to ensure that the facility production requirements are being met.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Include but are not limited to the following, other duties may be applied;

• Perform inspections and tests per customer specifications and company procedures
• Using measuring instruments, equipment, and check gauges, evaluate or verify components requirements
• Perform visual inspection to ensure components and assemblies meet customer defined appearance requirements.
• Perform visual verification to ensure all required components have been used in an assembly as required per BOM or other documentation.
• Verify standard work procedures (TIS) and process are being followed
• Read blueprints to determine dimensions and tolerance specifications
• Interface effectively with all levels of plant personnel
• Might Perform Receiving Inspection of purchased material and components as required
• Perform regular quality assessments of products in all stages of the manufacturing process as they are brought to the MRB area, to determine course of action to bring product to customer’s specifications.
• At all times, verifies that the calibration status of measuring and inspection equipment is up to date.
• Has the responsibility and authority to properly identify, quarantine, and report non-conforming product. Resolve quality-related issues in a timely manner.
• Participates in MRB reviews.
• Document inspection and rework/repair outcomes by logging work performed and its outcome.
• Be able to open in the system drawings, BOM, First Piece/t Last Piece Inspection sheets
• Perform surface repairs as per applicable surface repair TIS.
• Coach and teach the production team and Quality Inspectors about product repair techniques.
• As needed, will participates in the investigation of nonconformities and Corrective Actions to prevent reoccurrence.

Qualifications:

ESSENTIAL DUTIES AND RESPONSIBILITIES

Include but are not limited to the following, other duties may be applied;

• Perform inspections and tests per customer specifications and company procedures
• Using measuring instruments, equipment, and check gauges, evaluate or verify components requirements
• Perform visual inspection to ensure components and assemblies meet customer defined appearance requirements.
• Perform visual verification to ensure all required components have been used in an assembly as required per BOM or other documentation.
• Verify standard work procedures (TIS) and process are being followed
• Read blueprints to determine dimensions and tolerance specifications
• Interface effectively with all levels of plant personnel
• Might Perform Receiving Inspection of purchased material and components as required
• Perform regular quality assessments of products in all stages of the manufacturing process as they are brought to the MRB area, to determine course of action to bring product to customer’s specifications.
• At all times, verifies that the calibration status of measuring and inspection equipment is up to date.
• Has the responsibility and authority to properly identify, quarantine, and report non-conforming product. Resolve quality-related issues in a timely manner.
• Participates in MRB reviews.
• Document inspection and rework/repair outcomes by logging work performed and its outcome.
• Be able to open in the system drawings, BOM, First Piece/t Last Piece Inspection sheets
• Perform surface repairs as per applicable surface repair TIS.
• Coach and teach the production team and Quality Inspectors about product repair techniques.
• As needed, will participates in the investigation of nonconformities and Corrective Actions to prevent reoccurrence.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an Employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the Employee is regularly required to stand for long periods of time; walk; climbing stairs, sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear

The Employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 35 pounds

WORK ENVIRONMENT and ENVIRONMENTAL CONDITIONS

The work environment characteristics described here are representative of those an Employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

• The noise level in the work environment is usually moderate
• The environment is primarily a production environment
• There is some limited exposure to physical risk