[Samsung Electronics America] Etch Engineer - Process Owner 채용

Samsung Electronics America

United States

On-site

USD 102,000 - 122,000

Full time

14 days+

Get a reply from this recruiter

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Medical, dental, and vision insurance
Life insurance and 401(k) matching
Onsite café and workout facilities
Paid maternity and paternity leave
PTO and holidays
MBO bonuses

Job summary

Samsung Austin Semiconductor is seeking an Etch Engineer - Process Owner to lead FEOL and BEOL plasma etch development for GAA architectures, including 2 nm nodes and older FinFET technologies. You will implement Advanced Process Control and FF strategies, perform SPC/FDC, and drive yield improvements across global facilities.

The role requires a PhD? No, a Bachelor's degree and 2 years in semiconductor etch as well as expertise in DOE, SPC, APC, and tool qualification.

Qualifications

  • Bachelor’s degree in Engineering or closely related field.
  • 24 months in semiconductor plasma etch or related role.
  • Experience with BEOL/FEOL dry plasma etch and FinFET or GAA tech.
  • Proficiency in SPC/FDC, APC, and DOE methodologies.
  • Authors SOPs for novel etch processes and APQP activities.

Responsibilities

  • Develop and optimize FEOL/BEOL plasma etch for GAA and 2 nm nodes.
  • Implement APC/FF process controls; monitor SPC and yield.
  • Qualify and transfer etch processes across global fabs; support ramp.
  • Collaborate with e;quipment design, metrology, and yield teams; perform DFMEA.

Skills

FEOL etch
BEOL etch
GAA and nanosheet tech
DOE methods
Statistical analytics
APC/SPC
Root-cause analysis
Tool integration

Education

Bachelor’s degree in Engineering

Tools

Spotfire
JMP
Minitab
Python

Job description

About Samsung Austin Semiconductor

Samsung is a world leader in advanced semiconductor technology, founded on the belief that the pursuit of excellence creates a better world. At Samsung Austin Semiconductor, we are Innovating Today to Power the Devices of Tomorrow. Come innovate with us!

Position Summary

As an Etch Engineer - Process Owner, see roles and responsibilities below.

Role and Responsibilities

Develop and optimize Front End of Line (FEOL) and Back End of Line (BEOL) plasma etch processes for emerging Gate-All-Around (GAA) architectures including 2 nm node and mature semiconductor technology nodes, including 14nm, 17nm, 28nm FinFET. Implement and sustain Advanced Process Control (APC) methodologies, including feed-forward (FF) process control strategies for trench etch and via-height optimization. Perform Statistical Process Control/Fault Detection and Classification (SPC/FDC) monitoring, statistical yield analysis, and root-cause investigations for plasma etch process excursions, interlocks, and Out-of-Control Action Plan (OCAP) events. Qualify and integrate heterogeneous etch tool platforms, including LAM Research FLEX/KIYO, and/or TEL, Applied Materials, Mattson, PSK and SEMES and cross-platform etch equipment for production deployment. Conduct process matching and technology transfer activities across global semiconductor manufacturing sites. Support factory ramp-up activities through tool qualification planning, capacity optimization, and throughput improvement initiatives. Develop monitoring plans for post-preventive maintenance (PM) defect detection and production wafer qualification. Collaborate with equipment engineering, process integration, metrology, and yield enhancement teams to improve process stability and manufacturing efficiency. Utilize DOE methodologies and statistical analytics platforms, including Spotfire, JMP, Minitab, and Python for process optimization and defect reduction initiatives. Perform failure analysis and material characterization using SEM, EDX, spectroscopy, and related semiconductor characterization techniques. Support semiconductor manufacturing for automotive electronics, memory devices, RF technologies, and advanced display applications. Participate in cost-reduction and risk-assessment initiatives involving process hardware qualification and fab operational efficiency improvements. (Multiple Openings)

Skills and Qualifications

Bachelor’s degree in Chemical Engineering, Materials Science Engineering, Electrical Engineering, Semiconductor Engineering, or closely related engineering discipline and 24 months of experience in job offered or in a semiconductor plasma etch process engineering role within an advanced-node semiconductor manufacturing environment. Requires 24 months of experience involving the following: 1. Back End of Line (BEOL) and Front End of Line (FEOL) dry plasma etch process development and sustaining; 2. Semiconductor manufacturing using FinFET and/or Gate-All-Around (GAA) process technologies, including Nanosheet 3D transistor technology and Copper to Copper Hybrid Bonding; 3. Statistical Process Control (SPC), Fault Detection and Classification (FDC), Advanced Process Control (APC), and statistical yield analysis methodologies to detect, correct, and optimize semiconductor manufacturing processes to maximize yield; 4. Authorship of critical standard operating procedures (SOPs) for novel etch processes; 5. New Product Introduction: Facilitating launch of new products by optimizing etch recipes and tool spread, and implementing novel APC processes like Feed Forward APC; 6. Semiconductor tool qualification and process matching activities to ensure matching process baselines and hardware to hardware reproducibility; 7. Root-cause analysis for yield excursions and defect reduction; 8. Semiconductor process optimization using Design of Experiments (DOE) methodologies; 9. Semiconductor metrology and characterization, including SEM and EDX analysis; 10. Statistical analytics software, such as Spotfire, JMP, Minitab, or Python, to maximize wafer yield, optimize complex manufacturing processes, and detect equipment failures before they cause defects; and 11. High-volume manufacturing (HVM) and factory ramp support to transition a semiconductor design from a functional prototype into a commercially viable, cost-effective, and mass-produced product.

The current base salary range for this role is between $102,230 to $122,230. Individual base pay rates will depend on factors including duties, work location, education, skills, qualifi cations and experience. Total compensation for this position will include a competitive benefi ts package and may include participation in company incentive compensation programs, which are based on factors to include organizational and individual performance.

Total Rewards

At Samsung Austin Semiconductor, base pay is just one part of our total compensation package. The base compensation for this role will depend on education, experience, skills, and location.

We offer a comprehensive benefits package, including:
  • Medical, dental, and vision insurance
  • Life insurance and 401(k) matching with immediate vesting
  • Onsite café(s) and workout facilities
  • Paid maternity and paternity leave
  • Paid time off (PTO) + 2 personal holidays and 10 regular holidays
  • Wellness incentives and MORE

Eligible full-time employees (salaried or hourly) may also receive MBO bonuses based on company, division, and individual performance.

All positions at Samsung Austin Semiconductor are full-time on-site.

Trade Secrets

By submitting an application, you agree not to disclose to Samsung or induce or encourage Samsung to use any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Etch Engineer - Process Owner
Etch Engineer - Process Owner

Samsung Austin Semiconductor, LLC. • Taylor (TX)

On-site
USD 102,000 - 122,000
Medical, dental, and vision insurance
Life insurance and 401(k) matching
Onsite café(s) and workout facilities
+3
Etch Process Engineer - Days
Etch Process Engineer - Days

Samsung Electronics • Taylor (TX)

On-site
USD 70,000 - 179,000
Medical, dental, and vision insurance
401(k) matching with immediate vesting
Onsite café(s) and workout facilities
+3
Etch Process Engineer - Days
Etch Process Engineer - Days

Samsung Electronics America • Austin (TX)

On-site
USD 70,480 - 179,090
Medical, dental, and vision insurance
Life insurance and 401(k) matching
Onsite café and workout facilities
+2
Etch Process Engineer - Days
Etch Process Engineer - Days

Samsung Electronics America • Taylor (TX)

On-site
USD 70,000 - 179,000
Medical, dental, and vision insurance
Life insurance
401(k) matching
+3
[Samsung Electronics America] Etch Equipment Engineer 채용
[Samsung Electronics America] Etch Equipment Engineer 채용

Bzpp • United States

On-site
USD 70,000 - 179,000
Medical, dental, and vision insurance
Life insurance and 401(k) matchingwith
Onsite café(s) and workout facilities
+2
Etch Process Engineer - Nights
Etch Process Engineer - Nights

Samsung Electronics America • Austin (TX)

On-site
USD 70,480 - 179,090
Medical, dental, vision insurance
Life insurance & 401(k) matching
Onsite café(s) and workout facilities
+2
Etch Process Engineer - Nights
Etch Process Engineer - Nights

Samsung Electronics America • Taylor (TX)

On-site
USD 70,480 - 179,090
Medical, dental, and vision insurance
Life insurance and 401(k) matching
Onsite café(s) and workout facilities
+2
[Samsung Electronics America] Etch Process Technician 채용
[Samsung Electronics America] Etch Process Technician 채용

Bzpp • United States

On-site
USD 26,000 - 83,000
Medical insurance
Dental insurance
Vision insurance
+4
[Samsung Electronics America] Etch Senior Process Engineer 채용
[Samsung Electronics America] Etch Senior Process Engineer 채용

Bzpp • United States

On-site
USD 106,000 - 145,000
Medical, dental, and vision insurance
Life insurance and 401(k) matching
Onsite café and fitness facilities
+3
Etch Process Engineer - Days
Etch Process Engineer - Days

Samsung Electronics America • Austin (TX)

On-site
USD 70,000 - 179,000
Medical, dental, and vision
401(k) matching
Onsite gym + cafe
+3