RTX – Raytheon: Electronics Test Technician – 3rd Shift

Greater Lowell Chamber of Commerce

Andover (MA)

On-site

USD 37,000 - 53,000

Full time

48 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Raytheon is hiring an Electronics Test Technician for its Andover, MA site. The role involves moderate testing, troubleshooting of production and development hardware, and setting up test equipment for multiple configurations.

The incumbent will work a 3rd shift from 10:00pm to 6:00am onsite and must pass a technical interview, with a security clearance required. The position requires interpreting prints, schematics and specifications, using diverse test equipment, and supporting multiple setups

Qualifications

  • High School Diploma or GED required.
  • 1-2 years of specialized electronics education or 2 years of hands-on electronics test experience.
  • Ability to interpret schematics, specs, and process sheets.

Responsibilities

  • Perform moderately complex testing and troubleshooting of production and development systems.
  • Set up test equipment and test conditions, transport and operate UUTs.
  • Calibrate test stations and instruments; maintain proper housekeeping and safety.

Skills

Electrical testing
Troubleshooting
Schematics interpretation

Education

High School Diploma or GED

Tools

Electronic test equipment

Job description

Do you have a job posting, news about your business or a community update?

You can post it here! No login required.

Position Summary

Job Description

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Electronics Test Technician performs moderately complex testing, troubleshooting and acceptance of production, deliverable material on pre-production and development systems, infrared devices, lowest replaceable unit, circuit cards, subs, final assemblies and components.

*Starting Wage: $32.77*
*3rd Shift - 10:00pm - 6:00am - Andover, Massachusetts. This is an onsite role*

*Must be able to successfully pass a Technical Interview*

What you will do:

As required, works with engineering personnel with normal levels of support and supervision.

Works to prints, sketches, schematics, specifications, process sheets, and outlines.

Utilizes diversified test and measurement equipment and supports multiple setups simultaneously.

May work under environmental extremes.

Working with verbal, written, video or computer-based procedures and a knowledge of electronic theory, acquires, transports, and sets up test equipment and test conditions.

Applies knowledge of electronic theory, diagnostic aids, specifications, and manuals to isolate failures in both the unit under test and associated test equipment to lowest replaceable unit or component.

May perform rework, inspection and re-inspection incidental to test and as required, to return defective unit under test to operational condition in compliance with specification.

Transports equipment, hardware and repair material between work departments as required.

Loads and unloads UUT's (units under test) using cranes, hoists, and lifts and other mechanical lifting devises

Maintains associated peripheral equipment, tools and fixtures incidental to test process in proper operating condition and in accordance with general housekeeping guidelines.

Performs inspection of material utilizing test equipment, hand tools and other mechanical tools.

Performs all marking, stenciling, and painting as required by process.

Fabricates special-purpose jigs, fixtures, and adapters.

Performs daily/weekly test station calibrations as required.

Tunes and pots RF modules.

Performs DITMCO continuity testing and troubleshooting across all product types, including sub-assemblies and deliverable assemblies

Identifies deficiencies and makes suggestions to improve product reliability and quality.

Performs all duties contained in Test Operator C classification as directed.

Performs general maintenance and housekeeping of workplace, tools and equipment.

Maintains records, moves materials and follows safety rules in performance of duties.

Performs other similar duties as required or directed.

Machine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic, vibration, and environmental test/measurement/diagnostic equipment, soldering, potting equipment, solvents, chemicals, fixtures, common hand tools, ladders, staging, hoists, gauges, power equipment, and other tools and equipment of the trade.

Qualifications You Must Have:

High School Diploma or equivalent (GED).

1 - 2 years of specialized electronics education OR minimum of 2 years of experience in both electronics test and troubleshooting.

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Our role type definitions: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position is part of a collective bargaining agreement. Wage and workplace conditions, including shift times, are subject to this agreement. Individuals hired into this position will be represented by a union.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm

The hourly rate for this role is $32.77. The salary provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.

Responsibilities

What you will do:

As required, works with engineering personnel with normal levels of support and supervision.

Works to prints, sketches, schematics, specifications, process sheets, and outlines.

Utilizes diversified test and measurement equipment and supports multiple setups simultaneously.

May work under environmental extremes.

Working with verbal, written, video or computer-based procedures and a knowledge of electronic theory, acquires, transports, and sets up test equipment and test conditions.

Applies knowledge of electronic theory, diagnostic aids, specifications, and manuals to isolate failures in both the unit under test and associated test equipment to lowest replaceable unit or component.

May perform rework, inspection and re-inspection incidental to test and as required, to return defective unit under test to operational condition in compliance with specification.

Transports equipment, hardware and repair material between work departments as required.

Loads and unloads UUT's (units under test) using cranes, hoists, and lifts and other mechanical lifting devises

Maintains associated peripheral equipment, tools and fixtures incidental to test process in proper operating condition and in accordance with general housekeeping guidelines.

Performs inspection of material utilizing test equipment, hand tools and other mechanical tools.

Performs all marking, stenciling, and painting as required by process.

Fabricates special-purpose jigs, fixtures, and adapters.

Performs daily/weekly test station calibrations as required.

Tunes and pots RF modules.

Performs DITMCO continuity testing and troubleshooting across all product types, including sub-assemblies and deliverable assemblies

Identifies deficiencies and makes suggestions to improve product reliability and quality.

Performs all duties contained in Test Operator C classification as directed.

Performs general maintenance and housekeeping of workplace, tools and equipment.

Maintains records, moves materials and follows safety rules in performance of duties.

Performs other similar duties as required or directed.

Machine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic, vibration, and environmental test/measurement/diagnostic equipment, soldering, potting equipment, solvents, chemicals, fixtures, common hand tools, ladders, staging, hoists, gauges, power equipment, and other tools and equipment of the trade.

Requirements

Qualifications You Must Have:

High School Diploma or equivalent (GED).

1 - 2 years of specialized electronics education OR minimum of 2 years of experience in both electronics test and troubleshooting.

Salary Range

$32.77 - $2.00 progression rate increase every 26 weeks (Every January 1 st and July 1 st) until cap or ceiling is met.

About RTX – Raytheon

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

RTX – Raytheon: Electronics Test Technician – 1st Shift
RTX – Raytheon: Electronics Test Technician – 1st Shift

Greater Lowell Chamber of Commerce • Andover (MA)

On-site
USD 37,000 - 53,000
RTX – Raytheon: Electronics Test Technician – 2nd Shift
RTX – Raytheon: Electronics Test Technician – 2nd Shift

Greater Lowell Chamber of Commerce • Andover (MA)

On-site
USD 37,000 - 53,000
Electronics Test Technician - 3rd Shift
Electronics Test Technician - 3rd Shift

RTX • Andover (MA)

On-site
USD 39,000 - 52,000
Medical insurance
Dental insurance
Vision insurance
+10
Electronics Test Technician - 3rd Shift
Electronics Test Technician - 3rd Shift

RTX • Andover (MA)

On-site
USD 37,000 - 53,000
Medical Insurance
Dental Insurance
Vision Insurance
+6
Electronics Test Technician - 1st Shift
Electronics Test Technician - 1st Shift

RTX • Andover (MA)

On-site
USD 33,000 - 40,000
Electronics Test Technician *4th Shift*
Electronics Test Technician *4th Shift*

RTX • Andover (MA)

On-site
USD 37,000 - 53,000
Medical
Dental
Vision
+11
Electronics Test Technician - 1st Shift
Electronics Test Technician - 1st Shift

RTX • Andover (MA)

On-site
USD 39,000 - 52,000
Medical
Dental
Vision
+3
Test & Validation Engineer II - 3rd Shift
Test & Validation Engineer II - 3rd Shift

RTX • Andover (MA)

On-site
USD 69,000 - 131,000
12% shift premium
Medical
Dental
+11
Assembler C (2nd Shift)
Assembler C (2nd Shift)

Prattwhitney • Andover (MA)

On-site
USD 23,000 - 33,000
Assembler C (4th Shift)
Assembler C (4th Shift)

Prattwhitney • Andover (MA)

On-site
USD 23,000 - 33,000
Medical insurance
Dental insurance
Vision insurance
+7