RF System Integration Engineer

AST SpaceMobile; Midland (TX); On-site; USD 90,000 - 130,000; Full time

Job summary

AST SpaceMobile seeks a highly hands-on RF Assembly, Integration, and Test Engineer to execute, integrate, test, and debug flight RF hardware for a fast-paced LEO satellite program. You will personally build, integrate, verify, and troubleshoot RF systems from bench validation through launch, partnering with TT&C and GPS leads to translate designs into flight-ready hardware.

This role is a build, test, and fix position on the manufacturing floor, requiring keen hands-on skills and disciplined

Qualifications

• BS or MS in Electrical Engineering or equivalent hands-on RF experience.
• Strong practical RF experience across TT&C frequency bands.
• Hands-on RF assemblies, coax harness fabrication, antennas and RF subsystems.

Responsibilities

• RF Assembly, Integration & Test execution for flight hardware from bench validation through launch operations.
• Hands-on build, inspection, and rework of coax cables, harnesses, connectors, and RF racks.
• Design, assemble, and sustain RF test racks and automate RF test sequences.
• Support launch site operations and provide RF troubleshooting for readiness.

Skills

Hands-on RF experience

Attention to detail

Ownership mindset

Team collaboration

Education

BS/MS in Electrical Engineering

Tools

VNA

Spectrum Analyzer

Power Meters

Signal Generators

RF test equipment

Job description

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today’s five billion mobile subscribers and finally bring broadband to the billions who remain unconnected.

Position Overview

We are seeking a highly hands-on RF Assembly, Integration, and Test (AIT) Engineer to execute, integrate, test, and debug flight RF hardware supporting a fast-paced LEO satellite program at AST SpaceMobile.

This is a hardware-centric execution role. The selected candidate will personally build, integrate, verify, troubleshoot, and support RF systems from bench validation through launch operations. You will partner directly with TT&C and GPS design leads who own system architecture and requirements, translating released designs into robust, flight-ready hardware.

This is not a documentation or coordination position — it is a build, test, and fix role.

Key Responsibilities

RF Assembly, Integration & Test Execution

• Execute integration and verification testing for TT&C and GPS flight hardware.
• Own hands-on integration and test of:
• Flight radios and transceivers
• Flight antennas
• RF harnessing and coaxial assemblies
• AIT RF racks and ground support equipment (GSE)
• Work directly from released schematics, ICDs, and mechanical interfaces.
• Verify RF performance margins, interface integrity, and system compliance through empirical hardware testing and data analysis.

Hands-On Manufacturing & Build Support

• Personally drive RF hardware build, inspection, integration, and rework activities.
• Fabricate, inspect, and validate:
• Coaxial cable assemblies
• Connector terminations (SMA, TNC, N-type, etc.)
• Harness routing, clamping, torque application, and strain relief implementation
• Maintain active presence on the manufacturing floor during hardware builds.
• Partner with manufacturing engineers and technicians to ensure workmanship standards.
• Identify and arrest integration escapes, workmanship defects, and latent hardware risks before propagation.

AIT, Test, Debug & Automation

• Design, assemble, and sustain AIT RF racks and associated test infrastructure.
• Execute and continuously improve:
• RF functional testing
• End-to-end TT&C and navigation test configurations
• Return loss, insertion loss, isolation, power output, and sensitivity measurements
• Develop and maintain RF test automation:
• Automate repetitive RF test sequences and structured data capture
• Improve repeatability, throughput, and configuration traceability
• Support environmental and system-level testing including:
• Thermal vacuum (TVAC)
• Vibration
• Thermal cycling
• Spacecraft integrated testing
• Own RF anomaly resolution:
• Debug harness, connector, and integration defects
• Identify workmanship-induced damage
• Isolate EMI/RFI coupling issues under schedule pressure
• When hardware fails during test, personally execute root cause isolation and corrective rework.

Acceptance, Readiness & Launch Support

• Execute formal acceptance testing per released procedures and qualification requirements.
• Review test data packages, close discrepancy reports, and verify flight readiness.
• Support launch site operations, including last-minute RF troubleshooting and configuration validation.

What Winning Looks Like

• RF hardware integrates cleanly and predictably in AIT.
• Issues are identified early, debugged efficiently, and closed with permanent corrective action.
• RF systems perform consistently from bench validation → environmental test → launch → orbit.
• You can point to the spacecraft and confidently state: “I built and tested that system.”

Qualifications

Education

• BS or MS in Electrical Engineering, or equivalent demonstrated hands-on RF experience.

Experience

• Strong practical RF experience across common TT&C frequency bands.
• Demonstrated hands-on experience with:
• RF assemblies and coax harness fabrication
• Antennas and RF subsystems
• RF test equipment (VNA, spectrum analyzer, power meters, signal generators)
• Experience supporting AIT, environmental test campaigns, and production manufacturing.
• Comfortable operating in cleanroom, laboratory, and factory environments.
• Proven ability to troubleshoot and close hardware issues under aggressive timelines.

Preferred Qualifications

• Direct LEO satellite RF or TT&C integration experience.
• Launch base or on-orbit support exposure.
• Experience supporting multiple flight vehicles in parallel.
• Background developing automated RF test frameworks and data systems.

Soft Skills

• High ownership mentality with strong bias toward execution.
• Detail-oriented while maintaining schedule awareness.
• Pragmatic decision-making in ambiguous or data-limited environments.
• Collaborative across design, manufacturing, and test organizations.
• Calm and methodical under hardware anomaly pressure.

Technology Stack

• Vector Network Analyzers (VNA)
• Spectrum Analyzers
• RF Signal Generators
• Power Meters
• RF Switching Matrices
• Automated Test Software (Python, LabVIEW, or equivalent)
• Standard AIT data logging and configuration management tools

Physical Requirements

• Ability to work extended periods in cleanroom and lab environments.
• Frequent hands-on bench work requiring fine motor skills.
• Ability to lift and maneuver test equipment and RF racks (up to 40 lbs).
• Willingness to travel to launch sites as required.

AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.