Req# 3179

General Machine Products Company

Pennsylvania

On-site

USD 30,000 - 39,000

Full time

13 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Sign-on bonus

Job summary

General Machine Products Company in Trevose, PA seeks a CNC Machine Operator III to produce machined parts by setting up and running CNC mills or lathes while maintaining quality and safety standards.

You will join a 2nd shift (2:30 PM–11:30 PM EDT) with training on the 1st shift (6:30 AM–3:00 PM EDT) initially; a competitive sign-on bonus is available based on experience and shift requirements.

Qualifications

  • High school diploma or equivalent preferred; 5+ years operating and programming CNC mills or lathes.
  • Seven (7) years of experience preferred.
  • Must read, write, speak and understand basic English.
  • Proficiency in basic math and trigonometry.
  • Ability to communicate and work as a team member.
  • Ability to work independently with minimal supervision.
  • Ability to read and understand part and tool prints.
  • Ability to use precision measuring tools and hold close tolerances.

Responsibilities

  • Operate drill presses, manual milling machines, CNC milling machines, manual lathes and CNC lathes.
  • Perform complex set-up of CNC machines by loading programs, installing and adjusting chucks, cutting tools, attachments, tool holders, vises, collets, bushings, stops and stock pushers.
  • Make adjustments to the program as needed.
  • Load and unload raw materials and parts into the machine.
  • Verify settings by measuring positions, first-run part, and sample workpieces adhering to company quality standards.
  • Inspect and measure finished product using calipers, gauges, micrometers, and other machinist hand tools.
  • Compare finished product to drawing specifications to determine if they adhere to company quality standards.
  • Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting controls; and replacing worn tools.
  • Maintain continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
  • Keep work area in clean and orderly condition, complying with established 5S standards.
  • Maintain a safe work environment to prevent on-the-job injuries by following and promoting company, OSHA and EPA rules and regulations, implementing machine safeguards, recognizing and reporting safety hazards and follow all safety procedures and standards.
  • Perform other duties as required within the nature and level of work.

Skills

English proficiency
Teamwork
Independent work
Tolerances

Education

High school diploma or equivalent

Tools

CNC mills
CNC lathes
Precision tools

Job description

CNC Machine Operator III is responsible for producing machined parts by setting up and running complex jobs on computer numerical control (CNC) lathe or milling machines, maintaining quality and safety standards, keeping records, and maintaining equipment and supplies.

This position will report to our facility in Trevose, PA and must be available to work during our 2nd shift hours of operation, 2:30 PM – 11:30 PM EDT, with the first few weeks spent training on the 1st shift (6:30 AM – 3:00 PM EDT) before transitioning to the 2nd shift.

Competitive sign-on bonus offered for qualified candidates based on experience and shift requirements.

Responsibilities of this role include:

  • Operate drill presses, manual milling machines, CNC milling machines, manual lathes and CNC lathes.
  • Perform complex set-up of CNC machines by loading programs, installing and adjusting chucks, cutting tools, attachments, tool holders, vises, collets, bushings, stops and stock pushers.
  • Make adjustments to the program as needed.
  • Load and unload raw materials and parts into the machine.
  • Verify settings by measuring positions, first-run part, and sample workpieces adhering to company quality standards.
  • Inspect and measure finished product using calipers, gauges, micrometers, and other machinist hand tools.
  • Compare finished product to drawing specifications to determine if they adhere to company quality standards.
  • Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling andthread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjustingcontrols; and replacing worn tools.
  • Maintain continuity among work shifts by documenting and communicating actions, irregularities, and continuingneeds.
  • Keep work area in clean and orderly condition, complying with established 5S standards.
  • Maintain a safe work environment to prevent on-the-job injuries by following and promoting company, OSHA and EPA rules and regulations, implementing machine safeguards, recognizing and reporting safety hazards and follow all safety procedures and standards.
  • Perform other duties as required within the nature and level of work.
Qualifications
  • High school diploma or equivalent is preferred and five (5) years of experience operating and programming CNC Mills or Lathes.
    • Seven (7) years of experience is preferred.
  • Must be able to read, write, speak and understand basic English.
  • Proficiency in basic math and trigonometry.
  • Ability to communicate and work as a team member.
  • Ability to work independently with minimum to nosupervision.
  • Ability to read and understand part and tool prints.
  • Ability to use precision measuring tools and holdclose tolerances.
Physical Demand Requirements

Required to stand, walk or sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move objects up to 35 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Department Leader (2nd Shift) - Up To $5,000 Sign-On Bonus
CNC Department Leader (2nd Shift) - Up To $5,000 Sign-On Bonus

Klein Tools • Trevose (PA)

On-site
USD 70,000 - 90,000
Sign-on bonus
CNC Set‑Up Machinist — Mills & Lathes
CNC Set‑Up Machinist — Mills & Lathes

Klein Tools • Trevose (PA)

On-site
USD 36,000 - 47,000
Sign-on bonus
CNC Lathe Machinist- 2nd shift (Mon-Thurs - 3:30pm - 2am)
CNC Lathe Machinist- 2nd shift (Mon-Thurs - 3:30pm - 2am)

Klein Tools • Mansfield (TX)

On-site
USD 52,000 - 72,000
CNC Machinist III - Mills or Lathes
CNC Machinist III - Mills or Lathes

P & F Industries • Ogle Township (PA)

On-site
USD 47,000 - 61,000
Machine Operator - 2nd Shift (Monday - Thursday, 3:30pm - 5am)
Machine Operator - 2nd Shift (Monday - Thursday, 3:30pm - 5am)

General Machine Products Company • Mansfield (TX)

On-site
USD 22,000 - 30,000
CNC Machinist - Third Shift
CNC Machinist - Third Shift

Fortifi Food Processing Solutions • Birmingham (OH)

On-site
USD 50,000 - 65,000
CNC Set‑Up Machinist — Mills & Lathes
CNC Set‑Up Machinist — Mills & Lathes

Klein Tools Manufacturing • Trevose (PA)

On-site
USD 60,000 - 85,000
Sign-on bonus
4-Day Workweek CNC Lathe/Mill Operator, 2ND & 3RD Shift
4-Day Workweek CNC Lathe/Mill Operator, 2ND & 3RD Shift

Dubuque Screw Products, Inc. • Dubuque (IA)

On-site
USD 25,000 - 39,000
CNC Operator
CNC Operator

Randstad • Feasterville-Trevose

On-site
USD 52,000 - 72,000
Medical benefits for employee
Machinist - 3rd shift - (Fri-Sun- 5am-5pm)
Machinist - 3rd shift - (Fri-Sun- 5am-5pm)

Klein Tools • Mansfield (TX)

On-site
USD 25,000 - 36,000