Remote Senior C&I Engineer for Gas Turbine Systems

Automatic Data Processing, Inc.

Texas

Ibrido

USD 110.000 - 165.000

Tempo pieno

14 giorni+

Una candidatura completa in un minuto

Curriculum e lettera di presentazione personalizzati, pronti da inviare.

Supera i filtri ATS

Descrizione del lavoro

ADP, Inc. is seeking a Senior Controls & Instrumentation Engineer to support a major natural gas customer in the Beaumont/Port Arthur Texas area. This full‑time role requires expertise in GE MarkVIe controllers, HMI systems, calibration, and maintenance planning.

Based in Beaumont, TX, the engineer will lead commissioning, software upgrades, and troubleshooting while mentoring staff and coordinating outage activities. Travel to site locations is expected as needed.

Competenze

  • B.S. in Mechanical or Electrical Engineering required.
  • 7+ years in controls/instrumentation for gas turbines and related systems.
  • Experience with GE Mark VIe controllers and HMI systems.
  • Proven ability to troubleshoot cross-functional issues and communicate findings.
  • Willingness to travel on short notice.

Mansioni

  • Perform controls commissioning, maintenance, calibration, and replacement of controls hardware/software.
  • Upgrade control software with Home Office support and documentation.
  • Develop maintenance schedules to optimize unit reliability and availability.
  • Train engineers/technicians on operation, monitoring, and maintenance of equipment.
  • Mentor staff and ensure outage planning and execution processes.
  • Prepare detailed work scopes for each outage.

Conoscenze

GE MarkVIe knowledge
HMI development
Control system troubleshooting
Cross-functional teamwork
Calibration procedures
Matlab
MS Office
Technical communication
Multilingual

Formazione

Bachelor's degree in Mechanical or Electrical Engineering
Mark VIe Advanced Viewer
Mark VIe Troubleshooting
Mark Ve/VIe Functional Safety
EHS regulatory training

Strumenti

Mark VIe Advanced Viewer
Mark VIe Troubleshooting
Ovation
Siemens T3000/TXP
HMI editors
PI
Matlab
MS Office

Descrizione del lavoro

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Senior Controls & Instrumentation Engineer

Employee Full-Time Direct Remote Texas, US

19 days ago Requisition ID: 1959

POSITION: Senior Controls & Instrumentation Engineer

LOCATION: Port Arthur, TX

STATUS: Salary Exempt (OT Eligible)

JOB SUMMARY

This role will be supporting a major natural gas customer in the Port Arthur Texas area.

ESSENTIAL DUTIES AND RESPONSIBILITIES

The essential functions of the job include, but are not limited to, the following:

  • Perform controls commissioning tasks such as regular system maintenance, equipment calibration, repair and/ or replacement of controls software, hardware, and instruments.
  • Perform control software upgrades, includes development support with Home Office.
  • Perform combustion tuning.
  • Serve as the key technical resource for the customer.
  • Maintain a documented history of all changes or modifications for covered equipment. Ensure that changes are implemented across operations as quickly as possible.
  • Develop KPIs jointly with company that include all the elements of the duties.
  • Ensure that the M&D services are current and comprise all the known and anticipated degradation and failure modes of the covered equipment with respect to your discipline.
  • Train company engineers and technicians through practical experience. Prepare an evergreen structured on-the-job training program in collaboration with the company which covers operation, performance, condition monitoring, and maintenance of the covered equipment.
  • Mentor company staff on prompt troubleshooting and analysis of issues.
  • Work with the company to develop maintenance schedules associated with your discipline, to optimize covered unit reliability and availability.
  • Comply with contractor and company outage planning process and deliverables.
  • Conduct detailed maintenance planning, pre-outage, outage, and post-outage planning activities with the company.
  • Prepare detailed work scope for your discipline for each agreed outage.
  • Other duties as assigned
MINIMUM REQUIREMENTS
Education & Training
  • Bachelor's degree in Mechanical or Electrical Engineering or other related field
  • Mark VIe Control Systems - Familiarization (Advanced Viewer)
  • Control System - Mark VIe Intermediate (Advanced Viewer)
  • Control System - Mark Ve/VIe Troubleshooting (Advanced)
  • Control System - Mark VIe Maintenance (Advanced)
  • Intro to Mark Vies Functional Safety System
  • Must complete EHS assigned regulatory training for work area as described by PSM’s EHS Training Matrix

Skills/Experience

  • 7 + years of experience creating, modifying, simulating, implementing, field testing and troubleshooting logic sequences as well as Human Machine Interface (HMI) screens and interfaces on General Electric Mark controllers (MarkVe, MarkVI, MarkVIe). Workload knowledge of MarkV-HMI systems also required. Knowledge of MarkV-IDOS, Ovation or Siemens Control Systems (T3000, TXP) a plus
  • Utilizing appropriate design and analysis tools as necessary, such as control systems sequence builders and compilers, control system simulators, HMI screen editors, HMI consoles and controls, data gathering and reduction (HMI historian, PI, Matlab, MS Office, etc.), scheduling, reporting and others
  • 5+ years of experience of Gas Turbine general architecture and design, working knowledge of GT support and ancillary systems such as fuel delivery, purge, instrument air and hydraulic supplies, understanding of associated limits and alarms and ability to troubleshoot and correct issues
  • 5+ years of experience with instrument calibration procedures and typical tasks associated with recommissioning of GT after inspection, ability to perform associated hands-on fieldwork.
  • 3+ years of experience solving technical or organizational problems on cross-functional teams, with advanced skills in communications and documentation.
  • 3+ years of experience persuading and presenting technical topics to peers, higher management, and client.
  • Multilingual candidate is a plus.

Physical Requirements

  • Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms.
  • Balancing: Maintaining body equilibrium to prevent falling and walking, standing or crouching on narrow, slippery, or erratically moving surfaces.
  • Stooping/Crouching: Bending body downward and forward by bending spine at the waist.
  • Kneeling: Bending legs at knee to come to a rest on knee or knees
  • Crawling: Moving about on hands and knees or hands and feet
  • Reaching: Extending hand(s) and arm(s) in any direction
  • Standing: Particularly for sustained periods of time
  • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another.
  • Pushing & Pulling
  • Lifting up to 50 lbs. Raising objects from a lower to a higher position or moving objects horizontally from position-to-position
  • Grasping: Applying pressure to an object with the fingers and palm
  • Repetitive motion: Substantial movements (motions) of the wrists, hands, and/or fingers
  • Close visual acuity required to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes
  • Subject to environmental conditions as work activities occur inside and outside
  • Subject to noise: There is sufficient noise involved which can require shouting in order to be heard above ambient noise level
  • Subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.
  • Frequent close quarters, crawl spaces, and other areas that could cause claustrophobia. The worker is required to function in narrow aisles or passageways
  • Being able to wear required PPEs for specific tasks performed, such as respirators, Tyvek suit, gloves, face shield, etc.
  • Requires travel (air & ground) with short notice

Equal Opportunity Employer Veterans/Disabled

Ottieni la revisione del curriculum gratis e riservata.

o trascina qui il file.

Similar jobs

Offerte di lavoro simili che vale la pena confrontare

Senior Controls & Instrumentation Engineer – Remote
Senior Controls & Instrumentation Engineer – Remote

Power Systems Mfg., LLC • Texas

Ibrido
USD 110.000 - 150.000
Senior Controls & Instrumentation Engineer
Senior Controls & Instrumentation Engineer

Automatic Data Processing, Inc. • Texas

In loco
USD 110.000 - 165.000
Senior Controls & Instrumentation Engineer
Senior Controls & Instrumentation Engineer

Power Systems Mfg., LLC • Texas

Ibrido
USD 110.000 - 150.000
Controls Engineering Manager
Controls Engineering Manager

Beusa Energy Group • The Woodlands (TX)

In loco
USD 120.000 - 180.000
Senior Controls Engineer
Senior Controls Engineer

Dynamis Power Solutions • Houston (TX)

In loco
USD 110.000 - 160.000
Senior Electrical Engineer
Senior Electrical Engineer

Beusa Energy Group • Houston (TX)

In loco
USD 110.000 - 170.000
Gas Turbine Controls & Commissioning Engineer
Gas Turbine Controls & Commissioning Engineer

Power Systems Hanwha • Florida

In loco
USD 90.000 - 130.000
Power Generation - Controls SME
Power Generation - Controls SME

Beusa Energy Group • Houston (TX), The Woodlands (TX)

In loco
USD 120.000 - 180.000
Senior Industrial Controls Engineer | Multi-Platform Systems
Senior Industrial Controls Engineer | Multi-Platform Systems

Power Systems Hanwha • Florida

In loco
USD 90.000 - 120.000
Senior Shift Engineer: Gas Turbine Diagnostics & Monitoring
Senior Shift Engineer: Gas Turbine Diagnostics & Monitoring

Power Systems Hanwha • Florida

In loco
USD 110.000 - 160.000