Receiving Inspector

Boom Technology

Centennial (CO)

On-site

USD 41,000 - 62,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical coverage
401(k) with company match
Paid time off
Parental leave
Life and disability insurance
Equity

Job summary

Boom Supersonic is seeking a Receiving Inspector to verify that parts arriving match drawings, purchase orders, and certificates, ensuring safety and on-time build flow.

This hands-on role requires reading GD&T, measuring with calipers, micrometers, CMM where applicable, and documenting nonconforming material while supporting quality programs across Supply Chain, Manufacturing, and Engineering. On-site, fast-paced environment with attention to detail.

Qualifications

  • Inspection experience in aerospace, defense, or another regulated precision-manufacturing environment
  • Proficiency with precision measuring equipment
  • The ability to read and interpret engineering drawings, including GD&T
  • Familiarity with AS9100 or similar quality system requirements
  • Strong attention to detail and clear written and verbal communication
  • The ability to lift 50 lbs and stay on your feet for extended periods
  • CMM or advanced metrology experience, AS9102 first article knowledge, ERP/QMS experience, and counterfeit-parts awareness are all a plus

Responsibilities

  • Inspect incoming raw material, fasteners, machined parts, composites, electrical components, and assemblies against drawings, specs, and purchase orders
  • Use calibrated measurement tools — calipers, micrometers, height gauges, pin and thread gauges, and CMM where applicable — to verify dimensional and visual requirements
  • Review supplier documentation, including certificates of conformance, material certs, and test reports, for accuracy and completeness
  • Re‑verify parts returning from outside processing like heat treat and coating, and reconnect them to their traceability record
  • Document, tag, and quarantine nonconforming material, and initiate nonconformance reports
  • Support Material Review Board activities with clear inspection data
  • Maintain lot, heat, and serial traceability, and handle ESD‑sensitive and controlled items properly
  • Work with Supplier Quality, Manufacturing, Engineering, and Supply Chain to resolve issues quickly
  • Keep the inspection area organized and follow all safety and FOD‑control practices

Skills

Inspection experience
Precision measuring equipment
Reading engineering drawings
GD&T
AS9100 familiarity

Tools

CMM
ERP/QMS

Job description

Boom Supersonic is building the Overture supersonic airliner and the Superpower gas turbine — machines that require some of the most demanding manufacturing in modern industry.

That only works if every part that goes into them is exactly what the drawing says it is. As a Receiving Inspector, you are the first line of defense — the person who verifies that what arrives is what we ordered, what we need.

Not a dock job

This is a hands‑on inspection role. You'll measure parts, read drawings, review certs, and make accept, reject, or quarantine calls on real flight and turbine hardware. The decisions you make protect safety and keep the build line moving.

You'll also be doing it in a company that is still building its quality system. Your eye for what's missing, unclear, or wrong helps shape the process.

What you'll do
  • Inspect incoming raw material, fasteners, machined parts, composites, electrical components, and assemblies against drawings, specs, and purchase orders
  • Use calibrated measurement tools — calipers, micrometers, height gauges, pin and thread gauges, and CMM where applicable — to verify dimensional and visual requirements
  • Review supplier documentation, including certificates of conformance, material certs, and test reports, for accuracy and completeness
  • Re‑verify parts returning from outside processing like heat treat and coating, and reconnect them to their traceability record
  • Document, tag, and quarantine nonconforming material, and initiate nonconformance reports
  • Support Material Review Board activities with clear inspection data
  • Maintain lot, heat, and serial traceability, and handle ESD‑sensitive and controlled items properly
  • Work with Supplier Quality, Manufacturing, Engineering, and Supply Chain to resolve issues quickly
  • Keep the inspection area organized and follow all safety and FOD‑control practices
This job is demanding

You’ll be asked to hold the line when something is late and someone needs the part. You'll need to say no clearly, back it up with data, and help find the path forward. That takes technical skill, judgment, and the confidence to be the person who stops the line when something isn’t right.

You probably have
  • Inspection experience in aerospace, defense, or another regulated precision‑manufacturing environment
  • Proficiency with precision measuring equipment
  • The ability to read and interpret engineering drawings, including GD&T
  • Familiarity with AS9100 or similar quality system requirements
  • Strong attention to detail and clear written and verbal communication
  • The ability to lift 50 lbs and stay on your feet for extended periods
  • CMM or advanced metrology experience, AS9102 first article knowledge, ERP/QMS experience, and counterfeit‑parts awareness are all a plus
Why Boom

Boom is building one of the most ambitious industrial programs of this century. The work is hard, the pace is fast, and the expectations are high.

In return, you'll have real ownership of the gate that every part passes through, direct impact on hardware that matters, and the chance to grow with a quality function that is being built around you.

Compensation

The Base Rate for this position is $30 - $45 per hour. Actual rate will vary based on factors including but not limited to location, experience, and performance.

Benefits
Along with competitive pay and meaningful equity, Boom offers:

  • Medical coverage, with Boom paying 70% of medical premiums
  • Fully paid dental and vision premiums for employee-only coverage
  • A $100–$300 company HSA match on eligible medical plans
  • A 401(k) with a company match
  • Generous paid time off and company holidays
  • Paid parental leave
  • Confidential counseling, coaching, and therapy resources for you and your family
  • Company-paid life and disability insurance
  • A $1,000 contribution to Invest America accounts for Boom babies
  • Healthy meals, an on‑site gym, and a fully stocked kitchen
  • Ongoing wellness events
  • Discounts on technology, concerts, and rental cars
  • A dedicated real estate team to help you find a home

To conform to U.S. Government aerospace technology export regulations (ITAR and EAR), applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.

Boom is an equal opportunity employer, including for individuals with disabilities and protected veterans. We are building a culture of merit and excellence.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Receiving Inspector
Receiving Inspector

Boom Supersonic • Centennial (CO)

On-site
USD 41,000 - 62,000
Medical coverage
Dental and vision premiums paid for =
401(k) with company match
+8
Receiving Inspector
Receiving Inspector

Boom Supersonic • Englewood (CO)

On-site
USD 41,000 - 62,000
Medical coverage (Boom pays 70% of pre
Dental and vision premiums covered for
Company 401(k) matching
+8
Talent Coordinator
Talent Coordinator

Boom Supersonic • Centennial (CO)

On-site
USD 80,000 - 102,000
Medical coverage
Dental and vision premiums paid for on
401(k) with company match
+2
Manufacturing Engineer (Early Career Exceptional Talent)
Manufacturing Engineer (Early Career Exceptional Talent)

Boom Technology, Inc. • Centennial (CO)

On-site
USD 70,000 - 94,000
Principal Manufacturing Engineer, Machining
Principal Manufacturing Engineer, Machining

boomsupersonic.com • Englewood (CO)

On-site
USD 167,000 - 210,000
Medical coverage 70% paid premiums
Dental & vision premiums paid
401(k) with company match
+5
Technical Recruiter Centennial, Colorado
Technical Recruiter Centennial, Colorado

xaboom • Colorado

Hybrid
USD 138,000 - 174,000
Equity grants
Flexible PTO
Long term incentives
Manufacturing Engineer (Early Career Exceptional Talent)
Manufacturing Engineer (Early Career Exceptional Talent)

Boom Supersonic • Englewood (CO)

On-site
USD 70,000 - 94,000
Senior Financial Accountant
Senior Financial Accountant

Boom Supersonic • Centennial (CO)

On-site
USD 95,000 - 143,000
Medical coverage
401(k) matching
Paid time off
+5
Global Supply Manager
Global Supply Manager

Boom Technology, Inc. • Centennial (CO)

On-site
USD 94,000 - 198,000
Equity
Flexible PTO
Career development
Manufacturing Engineer (Travel)
Manufacturing Engineer (Travel)

Boom Supersonic • Centennial (CO)

On-site
USD 107,000 - 135,000
Flexible PTO policy
Long-term incentives/equity
Progressive benefits