Rail Foreman - 2nd Shift

Flanders Springboard

Longview (TX)

On-site

USD 65,000 - 90,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

FLANDERS Inc. is seeking a Rail Foreman on the second shift in Longview, TX. This hands-on working leader will support safe, efficient production of traction motors through disassembly, inspection, winding, assembly, testing and completion.

The role combines floor leadership (about 50%) with active participation in production, inspection and troubleshooting, working under the Traction Motor Supervisor. Hours are 3:00 PM–11:30 PM on the second shift.

Qualifications

  • High school diploma or GED required.
  • 3–5 years of industrial motor/rail/traction motor repair and manufacturing experience.
  • Previous lead/foreman or similar leadership experience.
  • Working knowledge of AC/DC traction motors and related components.
  • Experience performing electrical/mechanical inspections and using testing equipment.
  • Ability to read and interpret manuals, drawings, schematics and specs.
  • Strong leadership, communication, organization, troubleshooting and mentoring skills.
  • Basic proficiency with Microsoft Office and ERP/production-management systems.

Responsibilities

  • Direct and coordinate daily activities across the traction motor process while upholding safety, quality and production requirements.
  • Collaborate with supervisor and planning to execute production schedules and adjust workloads as needed.
  • Act as working foreman, dedicating about half the day to hands-on production support.
  • Perform electrical and mechanical testing using approved equipment and documentation.
  • Ensure inspections and work instructions are complete and compliant before progress.
  • Provide day-to-day direction, priorities, training and performance feedback to employees.
  • Maintain a safe environment and participate in safety activities and Stop Work Authority when needed.
  • Troubleshoot production and process issues; coordinate with teams to minimize disruptions.
  • Maintain accurate production status in ERP/AIC systems and report progress and delays.
  • Lead continuous-improvement activities (5S, Lean/Kaizen, root-cause analysis).
  • All other duties as assigned.

Skills

Leadership
Troubleshooting
Communication
Problem solving
Mentoring

Education

High school diploma or GED

Tools

Microsoft Office
ERP systems

Job description

FLANDERS is a world leader in renewing machines for heavy industry, specializing in the largest and most intricate applications. Our expertise encompasses distributing, servicing, repairing, designing, and manufacturing electric rotating machines. Additionally, we take pride in offering cutting-edge AI-powered condition-based monitoring, customized controls, seamless systems integration, and advanced automation solutions.

The Longview, TX team is adding a Rail Foreman to the second shift team. The Rail Foreman is a hands-on working leader responsible for supporting the safe, efficient, and timely production of traction motors throughout the complete repair and manufacturing process. The Rail Foreman provides day-to-day floor leadership across disassembly, cleaning, inspection, component repair, winding, assembly, testing, and final completion.

This position works directly with the Traction Motor Supervisor, Planning, Quality, and production employees to execute the daily and weekly production plan, monitor workflow, identify constraints, coordinate manpower, maintain quality standards, and ensure work is performed safely and in accordance with customer, OEM, and company requirements.

The Rail Foreman is expected to spend approximately 50% of the workday providing floor leadership and production coordination and 50% actively participating in hands-on production, inspection, troubleshooting, and testing activities.

The Rail Foreman serves as the primary floor-level leader for the traction motor production line on first shift while working under the direction of the Traction Motor Supervisor. The hours for this second shift position are 3:00 PM - 11:30 PM.

DUTIES AND RESPONSIBILITIES
  • Direct and coordinate daily activities throughout the traction motor process, including disassembly, cleaning, inspection, repair, winding, component preparation, assembly, testing, and final completion while maintaining safety, quality, and production requirements.
  • Work with the Traction Motor Supervisor and Planning to execute daily and weekly production schedules. Monitor workflow, manpower, material availability, equipment constraints, and production status; adjust work assignments as necessary and communicate issues that may impact customer commitments.
  • Serve as a working Foreman, spending approximately 50% of the workday actively supporting production activities, including assembly, inspection, troubleshooting, repair, and testing.
  • Perform and/or participate in electrical and mechanical testing of traction motors and components using approved testing and diagnostic equipment, including Megger/IR, winding resistance, Hi-Pot, surge testing, Volt-Ohm Meter, Growler, Amp Meter, and other required testing.
  • Ensure work meets applicable customer, OEM, engineering, and company requirements. Verify inspections, test sheets, work instructions, and quality documentation are complete and accurate before product advances through the process. Stop or hold work when safety, quality, or test requirements are not met.
  • Provide day-to-day work direction to production employees, including assigning work, communicating priorities, training and mentoring employees, and providing performance feedback. Escalate attendance, conduct, productivity, or performance concerns to the Traction Motor Supervisor for formal action.
  • Maintain a safe working environment by enforcing company safety policies, PPE requirements, and established work procedures. Exercise Stop Work Authority when unsafe conditions or practices are identified and participate in safety meetings, JSA reviews, and corrective actions.
  • Troubleshoot production, mechanical, electrical, and process issues; coordinate with the Traction Motor Supervisor, Planning, Quality, and Engineering as necessary to resolve problems and minimize production disruptions.
  • Maintain accurate production status and documentation in applicable ERP/AIC systems and provide timely updates regarding production progress, shortages, constraints, quality concerns, and anticipated delays.
  • Lead and participate in 5S, Lean/Kaizen, root-cause analysis, and continuous-improvement activities to improve safety, quality, workflow, productivity, and overall traction motor process performance.
  • All other duties as assigned.
SKILLS AND QUALIFICATIONS
  • High school diploma or GED required.
  • 3-5 years of industrial motor, rail, traction motor, or related electromechanical repair/manufacturing experience.
  • Previous Lead Technician, Foreman, Team Lead, or similar leadership experience.
  • Working knowledge of AC and DC traction motors and associated electrical and mechanical components preferred.
  • Experience performing electrical/mechanical inspections and operating applicable testing and diagnostic equipment.
  • Ability to read and interpret technical manuals, drawings, blueprints, schematics, specifications, and work instructions.
  • Strong leadership, communication, organizational, troubleshooting, and problem-solving skills with the ability to train and mentor employees.
  • Basic computer proficiency, including Microsoft Office and applicable ERP/production-management systems.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Utility Tech 2nd Shift
Utility Tech 2nd Shift

Flanders Springboard • Longview (TX)

On-site
USD 41,000 - 54,000
Remanufacturing Service Technician, Second Shift
Remanufacturing Service Technician, Second Shift

Wabtec Careers • Las Vegas (NV)

On-site
USD 25,571 - 36,420
Motor Assembly Technician I
Motor Assembly Technician I

FLANDERS • Longview (TX)

On-site
USD 42,000 - 62,000
DC Motor Technician I
DC Motor Technician I

FLANDERS • Lakeland (FL)

On-site
USD 38,000 - 54,000
Remanufacturing Service Technician, First Shift
Remanufacturing Service Technician, First Shift

Wabtec Careers • Las Vegas (NV)

On-site
USD 25,571 - 36,420
Electrical Maintenance Technician Laser or dial indicator alignment motor change outs
Electrical Maintenance Technician Laser or dial indicator alignment motor change outs

Flanders Springboard • Rock Hill (SC)

On-site
USD 55,000 - 75,000
Field Service Technician
Field Service Technician

FLANDERS • Rock Hill (SC)

On-site
USD 50,000 - 70,000
Field Service Technician
Field Service Technician

Flanders Springboard • Evansville (IN)

On-site
USD 40,000 - 65,000
Remanufacturing Service Technician, Second Shift
Remanufacturing Service Technician, Second Shift

Wabtec • Las Vegas (NV)

On-site
USD 30,000 - 33,000
Remanufacturing Service Technician, Third Shift
Remanufacturing Service Technician, Third Shift

Wabtec Careers • Las Vegas (NV)

On-site
USD 25,571 - 36,420