Radio Frequency (RF) Engineering Technician

Cpi

Kilgore (TX)

On-site

USD 65,000 - 90,000

Full time

6 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

CPI Antenna Technologies in Kilgore, TX, seeks an RF Engineering Technician II to support design, build, test, and modification of satellite communications systems in a hands-on lab and production environment.

The role requires strong fundamentals in electrical, mechanical, and test disciplines and offers growth within an aerospace/defense setting. On-site work with cross-functional teams is required.

Qualifications

  • Associate’s degree in Engineering Technology or related field.
  • 2–5 years of experience in a technical lab, manufacturing test, or engineering support role.
  • Experience in RF system installation, maintenance, and troubleshooting.
  • Knowledge of RF feed components and equipment.
  • Familiarity with RF testing tools and equipment.
  • Supports engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro-mechanical systems, experiment design circuitry, laser/light transmission devices or specialized test equipment.
  • Ability to demonstrate soldering skills to pass J-std cert if required.
  • Mechanical fabrication and basic tooling
  • Ability to read and interpret schematics and engineering drawings.
  • Strong troubleshooting mindset and ability to follow structured procedures.
  • Comfortable working under general supervision in a regulated environment.

Responsibilities

  • Support engineering activities including design support, test, checkout, modification, fabrication, and assembly of prototype and production electromechanical systems.
  • Build, troubleshoot, test, repair, and modify electronic and electro-mechanical assemblies, subsystems, and systems.
  • Conduct calibration, alignment, adjustment, and diagnostic testing on a variety of hardware and test equipment.
  • Operate standard lab equipment (DMM, oscilloscope, spectrum/network analyzer, power supplies).
  • Perform routine preventative maintenance on lab and test systems.
  • Construct basic tooling and fixtures to support unique engineering tasks.
  • Implement process improvements and document experimental results under guidance of senior engineers or technicians.
  • Work from schematics, engineering drawings, and written/verbal instructions.
  • Use hand and power tools to assemble, disassemble, and modify hardware.
  • Document test results and report data in prescribed formats.
  • Interface cross-functionally with engineering, manufacturing, and quality teams.
  • May provide direction to other employees with similar duties.

Skills

RF engineering
Lab testing
Soldering
Schematics reading
Mechanical fabrication

Education

Associate’s degree in Engineering Technology or related field

Tools

DMM
Oscilloscope
Spectrum/Network Analyzer
Power Supplies

Job description

Job Details

Posting Details
  • Posted on November 11, 2026
Locations

Showing 1 location

CPI Antenna Technologies - TX - Kilgore 2600 N Longview St Kilgore, TX 75662, USA

  • On-site
  • Production - Direct
  • Full-Time
  • Requisition #: RADIO002334
Description

The Radio Frequency (RF) Engineering Technician II supports engineering teams in the design, build, integration, test, and modification of satellite communications systems and associated electromechanical hardware. This role operates in a hands-on lab and production environment, working from schematics, drawings, and documented procedures to support prototype and production-level systems.

This position is ideal for a technician with strong fundamentals across electrical, mechanical, and test disciplines who is ready to operate in a regulated Aerospace & Defense environment.

YOUR DAY TO DAY INCLUDES:

  • Support engineering activities including design support, test, checkout, modification, fabrication, and assembly of prototype and production electromechanical systems.
  • Build, troubleshoot, test, repair, and modify electronic and electro-mechanical assemblies, subsystems, and systems.
  • Conduct calibration, alignment, adjustment, and diagnostic testing on a variety of hardware and test equipment.
  • Operate standard lab equipment (DMM, oscilloscope, spectrum/network analyzer, power supplies).
  • Perform routine preventative maintenance on lab and test systems.
  • Construct basic tooling and fixtures to support unique engineering tasks.
  • Implement process improvements and document experimental results under guidance of senior engineers or technicians.
  • Work from schematics, engineering drawings, and written/verbal instructions.
  • Use hand and power tools to assemble, disassemble, and modify hardware.
  • Document test results and report data in prescribed formats.
  • Interface cross-functionally with engineering, manufacturing, and quality teams.
  • May provide direction to other employees with similar duties.

YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE:

  • U.S. Citizenship required.
  • Associate’s degree in Engineering Technology or related field or equivalent hands-on experience.
  • 2–5 years of experience in a technical lab, manufacturing test, or engineering support role.
  • Experience in RF system installation, maintenance, and troubleshooting.
  • Knowledge of RF feed components and equipment.
  • Familiarity with RF testing tools and equipment.Supports engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro-mechanical systems, experiment design circuitry, laser/light transmission devices or specialized test equipment.
  • Ability to demonstrate soldering skills to pass J-std cert if required.
  • Mechanical fabrication and basic tooling
  • Ability to read and interpret schematics and engineering drawings.
  • Strong troubleshooting mindset and ability to follow structured procedures.
  • Comfortable working under general supervision in a regulated environment.
Preferred / Conditional Requirements
  • Experience in Aerospace, Defense, RF, SatCom, or high-reliability electronics.
  • Familiarity with calibration processes and documentation.
  • Prior Military Comms background.
Work Environment
  • Onsite lab and production environment.
  • Hands-on hardware role supporting mission-critical systems.
  • May require extended hours during test campaigns or integration phases.

SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY!

With a history spanning more than seven decades, Communications & Power Industries’ thousands of products have impacted people’s lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more.

CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets.

We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more!
WHO WE ARE:

CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us.

CPI is proud to be an Equal Opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Experience
Required
  • 3-8 years: Experience in RF system installation, maintenance, and troubleshooting.
  • Knowledge of RF feed components and equipment.
  • Familiarity with RF testing tools and equipment. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

This employer is required to notify all applicants of their rights pursuant to federal employment laws.

For further information, please review the Know Your Rights notice from the Department of Labor.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Radio Frequency (RF) Engineering Technician
Radio Frequency (RF) Engineering Technician

Communications & Power Industries (CPI) • Kilgore (TX)

On-site
USD 30,307 - 34,440
Health and wellness programs
Career development
Generous retirement savings plan
Test Technician - RF Feeds
Test Technician - RF Feeds

Communications & Power Industries (CPI) • Kilgore (TX)

On-site
USD 28,000 - 34,000
Health and wellness programs
Career development
Retirement savings plan with company 

Test Technician II
Test Technician II

Communications & Power Industries (CPI) • Plano (TX)

On-site
USD 65,000 - 90,000
Health benefits
Retirement savings plan
RF/Microwave Design Engineer
RF/Microwave Design Engineer

Cpi • State College

On-site
USD 110,000 - 140,000
Health benefits
Career development
Retirement plan
RF/Microwave Design Engineer
RF/Microwave Design Engineer

Communications & Power Industries (CPI) • Dale Summit (PA)

On-site
USD 110,000 - 160,000
Health and wellness programs
Career development
Retirement savings plan with company 

Test Technician II
Test Technician II

Communications & Power Industries (CPI) • Plano (TX)

On-site
USD 55,000 - 75,000
Health and wellness programs
Generous retirement savings plan with
Senior Project Engineer – Antenna Systems (IRAD)
Senior Project Engineer – Antenna Systems (IRAD)

Cpi • Plano (TX)

On-site
USD 110,000 - 160,000
Senior Project Engineer – Antenna Systems (IRAD)
Senior Project Engineer – Antenna Systems (IRAD)

Communications & Power Industries (CPI) • Plano (TX)

On-site
USD 120,000 - 160,000
Test Technician I/II
Test Technician I/II

CPI Electron Device Business • Beverly (MA)

On-site
USD 29,618 - 35,817
Medical, vision and dental insurance
Disability insurance
Life insurance
+4
RF Technician
RF Technician

Communications & Power Industries (CPI) • Dale Summit (PA)

On-site
USD 52,000 - 62,000
Health and wellness programs
Career development
Retirement savings plan with company 2