Quality Technician (Structural Steel Fabrication)
Alberici Constructors
Get more replies from employers
Send a job-specific resume in minutes.
Benefits offered by this job
Job summary
Alberici Constructors is hiring a Quality Technician to oversee quality and welding-related concerns at Hillsdale project sites and the Hillsdale Fabricators Shop. The role uses Alberici’s QA/QC programs, including AISC, to monitor project quality and compliance.
The successful candidate will work with engineering, construction, management and clients, traveling to North America as needed to fulfill duties and maintain regular attendance per project requirements.
Qualifications
- Bachelor’s degree in Engineering, Construction Management or related field; 3 years’ field quality experience.
- ASNT Level I preferred; AWS CWI, CWB, NACE and USACE certifications preferred.
- Experience implementing QA/QC programs and managing quality documents.
Responsibilities
- Implements quality assurance/quality control programs for the Company.
- Reviews owner, manufacturer and engineering quality requirements and applies them to the project.
- Manages Quality Document submittals for projects, including subcontractors.
- Manages project specific quality documents (dimensional checks, inspection reports and other quality related documents).
- Supports planning, development and implementation of vendor surveillance activities for procured items.
- Arranges for third party inspection service for bolting, welding, nondestructive testing, and others per client inspection requirements.
- Develops and implements electronic welding procedures for the Company (AWS Codes), including WPSs, PQRs, and Welder Certifications.
- Certifies welders per AWS and CWB Codes and maintains certifications.
- Develops and maintains a welder continuity program for AWS and CWB.
- Performs inspections/testing within field of expertise, including bolt testing of permanently installed bolts.
- Interfaces with clients through client surveys; writes weekly Quality Toolbox Talks.
- Manages the NCR Program, including NCRs and investigations.
- Manages calibration of equipment and weekly Quality Audits.
- Assists with annual AISC internal audit and updating Quality Manual/Forms.
Skills
Education
Job description
Headquartered in St. Louis, Missouri with more than 1,200 employees and nearing $2B in revenue, Alberici is a diversified construction company that partners with leading organizations throughout North America to build their most challenging and important projects.
Since our founding in 1918, Alberici earned a reputation for executing with quality, safety and trust. Combined with our 100+ years of experience, we provide construction solutions to the automotive, commercial, civil, energy, food & beverage, healthcare, heavy industrial, industrial process, and water industries.
Our mission is simple — and our approach to delivering on it is equally straightforward. We are as open and honest with our employees and partners as we are with our clients. We are here to work together to do the best work possible to bring this mission to life.
When it comes to our team, Alberici employees are built differently. We seek the best and brightest and are committed to investing in our people and providing the training and resources they need to learn, grow, and advance.
- Working Safely
- Valuing Diversity
- Serving Humbly
- Executing with Integrity
- Solving Creatively
- Engaging Fully
- Profit-sharing plan, cash bonus programs and annual cost-of-living adjustments
- Generous salary increases and per diems for qualified out-of-town assignments
- Health, dental and vision insurance eligibility on day one
- Paid parental leave
- Continuing education reimbursement
- Personalized career development and training programs
- Minimum of 29 days of PTO (including holidays) for entry-level roles
- Fitness center for St. Louis office-based team members
- Gym membership reimbursement for project-based team members
- Corporate office cafeteria access
- Employee Resource Group (ERG) opportunities
- Philanthropy opportunities
The Quality Technician interfaces with engineering, construction, management, clients and clients’ inspectors on quality and welding related concerns at project sites and/or Hillsdale Fabricators Shop. The Quality Technician also utilizes Alberici’s Quality Programs which includes the American Institute of Steel Construction (AISC), and other related programs as necessary to monitor the quality of projects.
include the following; however, other duties may be assigned. The Company provides reasonable accommodations to qualified individuals with a disability, unless doing so poses an undue hardship on the Company. To be a qualified individual, an employee must be able to perform each of the essential functions of his or her job with or without a reasonable accommodation.
- Implements quality assurance/quality control programs for the Company.
- Reviews owner, manufacturer and engineering quality requirements and applies them to the project.
- Manages Quality Document submittals for projects, including subcontractors.
- Manages project specific quality documents (dimensional checks, inspection reports and other various quality related documents).
- Supports planning, development and implementation of vendor surveillance activities for procured items.
- Arranges for third party inspection service for bolting, welding, nondestructive testing, and others as may be required. Interfaces with third party inspection services per client inspection requirements.
- Develops and implements electronic welding procedures for the Company (various AWS Codes), including writing WPSs, PQRs, and Welder Certifications.
- Certifies welders per AWS (American Welding Society) and CWB (Canadian Welding Bureau) Codes and maintains their certifications according to same Code.
- Develops and maintains a welder continuity program for both AWS and CWB.
- Performs inspections/testing within field of expertise, including bolt testing of permanently installed bolts.
- Interfaces with clients through client surveys at the start, during and at the end of projects.
- Documents inspections and related quality control activities.
- Writes weekly Quality Toolbox Talks.
- Manages the Non-Conformance Report (NCR) Program, including writing NCRs and leading investigations.
- Manages calibration of equipment.
- Performs weekly Quality Audits.
- Assists with the Annual AISC internal audit.
- Assists with maintaining the Quality Manual, Quality Forms and Quality Procedures.
- Interacts with the shop floor on a regular basis while continuously monitoring quality.
- Travels to Company and subsidiary offices; offsite client, subcontractor, and supplier meetings; and other locations across North America to fulfill the essential duties of the role as required.
- Exhibits regular and reliable attendance in person as required by the Supervisor, Company guidelines, and/or project and office obligations.
- Manages and directs NDE Subcontractors.
- Supervises in accordance with the organization's policies and applicable laws. Responsibilities include training employees.
Bachelor’s degree in Engineering, Construction Management or related field and 3 years’ field quality experience, or equivalent combination of education and experience.
- ASNT Level I (American Society for Nondestructive Testing) preferred.
- AWS Certified Welding Inspector (American Welding Society) preferred.
- CWB Certified Welding Inspector/Supervisor preferred.
- NACE Certified Coating Inspector Level I (National Association of Corrosion Engineers) preferred.
- USACE Certifications (United States Army Corps of Engineers) preferred.
Alberici invests heavily in our team members training and development in both technical, management, and leadership aptitude.
This role is on the quality department career ladder; employees participate in a Professional Development Plan (PDP) focused on career advancement.
- Quality Manager
Alberici is a North American company with multiple Operating Companies: Alberici Constructors, Inc., Alberici Constructors, LTD., Alberici Construcciones, BRC, CAS Constructors, Filanc, Flintco, Hillsdale Fabricators, and Kienlen Constructors
'/%3e%3cpath%20d='M101.744%2012.4726L102.894%2016.1947L99.0021%2013.2201L101.744%2012.4726ZM105.3%208.40937H100.488L99.0026%203.59473L97.5116%208.41047L92.7%208.40385L96.5965%2011.3834L95.1055%2016.1942L99.0021%2013.2196L101.408%2011.3834L105.3%208.40992V8.40937Z'%20fill='white'/%3e%3cdefs%3e%3clinearGradient%20id='paint0_linear_5593_1381'%20x1='90'%20y1='9.44471'%20x2='99'%20y2='9.44471'%20gradientUnits='userSpaceOnUse'%3e%3cstop%20stop-color='%2300AD70'/%3e%3cstop%20offset='0.998594'%20stop-color='%2300B67A'/%3e%3cstop%20offset='1'%20stop-color='%23DCDCE6'/%3e%3c/linearGradient%3e%3c/defs%3e%3c/svg%3e){kind=small}
