Quality Technician – RMA & Failure Analysis

Lin Engineering

Morgan Hill (CA)

On-site

USD 70,000 - 90,000

Full time

9 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Lin Engineering in Morgan Hill, CA is seeking a Quality Technician – RMA & Failure Analysis to own the customer return process from intake to final disposition. You will troubleshoot at the bench, analyze data, and generate evidence‑based failure reports as part of a cross‑functional team under the Head of Quality.

You will manage RMAs, perform root cause analysis using 8D/5 Why/Fishbone, and drive CAPAs while maintaining traceability and ERP/QMS records.

Qualifications

  • Associate’s or bachelor’s degree in Engineering, Electronics Technology, Quality or related field or equivalent hands‑on experience.
  • 3+ years of hands‑on experience in failure analysis, test, troubleshooting or quality on electro‑mechanical or electronic products including RMAs.
  • Proven ability to isolate failures to component or root‑cause level with multimeters, oscilloscopes and bench test gear.
  • Experience with structured RCA methods: 8D, 5 Why, Fishbone, Fault Tree.
  • Ability to read engineering drawings, specs, test reports and work instructions.
  • Clear technical writing and ability to explain findings to customers and non‑technical colleagues.
  • Experience logging cases in ERP and electronic QMS.

Responsibilities

  • Investigate returned product, verify failures, troubleshoot, analyze data and write analysis reports.
  • Own the RMA process: review requests, issue documentation, track through disposition with traceability.
  • Drive root cause and corrective action; initiate CAPAs and monitor until closure.
  • Serve as technical contact for customers during return investigations and audits.
  • Control received material, storage, MTAs and MRB presentations.
  • Create dashboards in Excel/Power BI and suggest process improvements.
  • Maintain audit-ready records in RMA tracking, SAP and ComplianceQuest.

Skills

RMA process ownership
Failure analysis
Root cause analysis
Troubleshooting
Technical writing
Cross-functional collaboration
Time management

Education

Associate's or Bachelor's degree in Engineering or related field

Tools

Excel
Power BI
ERP systems (e.g., SAP)
QMS systems (ComplianceQuest)

Job description

Description

Quality Technician – RMA & Failure Analysis

Morgan Hill, CA | Full-time | On-site | Non-exempt (hourly, overtime eligible)

Pay range: $70,000 - $90,000 The salary offered within this range will depend on the candidate’s experience, skills and qualifications.

About the role

Lin Engineering designs and builds precision motors and motion control assemblies for demanding applications, under an AS9100D-certified quality system. We’re looking for a Quality Technician – RMA & Failure Analysis to own our customer return process from first request to final disposition, and to turn every return into quality data that makes our products better.

This role combines hands‑on technical work with process ownership. About 60% of your time goes to investigation: screening returned product, troubleshooting at the bench, and finding root cause. The other 40% goes to keeping RMAs moving, working with Quality, Engineering, Manufacturing, Supply Chain, Sales, and Customer Service, and serving as the main technical contact for customers during return investigations. You’ll report to the Head of Quality.

What you’ll do
  • Investigate returned product. Verify reported failures, troubleshoot electrical and mechanical issues, and analyze test data, inspection reports, and production and supplier records. Coordinate deeper failure analysis with Engineering, Manufacturing, and suppliers, and write clear, evidence-based failure analysis reports.
  • Own the RMA process. Review return requests for completeness, warranty status, and eligibility. Issue RMA documentation and shipping instructions, and track every return through disposition with full lot, date code, and serial number traceability.
  • Drive root cause and corrective action. Initiate CAPAs when findings meet escalation criteria and support root cause analysis using 8D, 5 Why, Fishbone, and Fault Tree methods. Track actions to closure, and catch recurring failure trends before they become escapes.
  • Be the customer’s technical point of contact. Give timely status updates, deliver failure analysis reports and corrective action summaries, and support customer audits and quality reviews.
  • Control returned material. Manage receipt, identification, segregation, and ESD-safe storage. Present material at Material Review Board (MRB) and carry out the approved disposition.
  • Report on return performance. Track RMA cycle time, return rates, warranty claims, failure mode Paretos, and cost of poor quality. Build dashboards in Excel and Power BI, and recommend process improvements.
  • Keep records audit-ready in our RMA tracking system, SAP, and ComplianceQuest.
Work environment and physical requirements

Work is split between the office, our failure analysis lab, and the manufacturing floor, with about half your time on a computer. You’ll follow ESD control procedures and wear required PPE in ESD-protected areas. The role involves frequent standing and walking, frequent use of hand tools and bench test equipment, and occasional bending, kneeling, and lifting up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Requirements
What you bring
  • An associate’s or bachelor’s degree in Engineering, Electronics Technology, Manufacturing/Industrial Technology, Quality, or a related field, or equivalent hands‑on experience.
  • 3+ years of hands‑on experience in failure analysis, test, troubleshooting, quality, or technical support on electro‑mechanical or electronic products, including owning RMAs, customer complaints, or service cases from intake to closure.
  • Proven ability to isolate failures to the component or root‑cause level using multimeters, oscilloscopes, and bench test equipment.
  • Experience finding root cause with structured methods such as 8D, 5 Why, Fishbone, or Fault Tree Analysis.
  • Ability to read engineering drawings, specifications, test reports, and work instructions.
  • Clear technical writing, and the ability to explain findings to customers and non‑technical colleagues.
  • Experience recording cases and transactions in an ERP system and an electronic QMS.
  • Proficiency with Microsoft Office, especially Excel and Outlook.
  • Ability to manage multiple open investigations in a fast‑paced, cross‑functional environment.
Nice to have
  • Experience with motors, motion control, or other electro‑mechanical products
  • Experience in an AS9100, ISO 9001, or ISO 13485 environment
  • Hands‑on SAP and ComplianceQuest experience
  • Familiarity with FMEA, SPC, Pareto analysis, and control plans
  • Power BI or similar dashboarding experience
  • ASQ CQT or CQE certification, or Six Sigma Green Belt or higher
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Technician – RMA & Failure Analysis
Quality Technician – RMA & Failure Analysis

Lin Engineering - Motor Specialists in Motion • Morgan Hill (CA)

On-site
USD 39,000 - 50,000
RMA Quality Engineer
RMA Quality Engineer

Cooler Master USA • Fremont (CA)

On-site
USD 80,000 - 110,000
RMA Quality Engineer
RMA Quality Engineer

SoloPoint Solutions • San Francisco (CA)

On-site
USD 90,000 - 120,000
Quality Technician: RMA & Failure Analysis (On-site)
Quality Technician: RMA & Failure Analysis (On-site)

Lin Engineering • Morgan Hill (CA)

On-site
USD 70,000 - 90,000
Quality Engineer
Quality Engineer

Timken • Carson City (NV)

On-site
USD 70,000 - 90,000
Mechanical Manufacturing Quality Engineer I
Mechanical Manufacturing Quality Engineer I

Johnson Health Tech Companies • Sturtevant (WI)

On-site
USD 60,000 - 80,000
Product Sustaining Engineering Manager RMA
Product Sustaining Engineering Manager RMA

Delta Electronics Americas • Plano (TX)

On-site
USD 80,000 - 120,000
Senior Product Engineer
Senior Product Engineer

Teledyne LeCroy Protocol Solutions Group (PSG) • Milpitas (CA)

On-site
USD 90,000 - 130,000
Sr. Engineer - Product
Sr. Engineer - Product

Employee Magnets, Inc. • Fort Worth (TX)

On-site
USD 120,000 - 160,000
Quality Engineer
Quality Engineer

Bison® • Whitsett (NC)

On-site
USD 70,000 - 95,000