Quality Technician

Crane Company

Chandler (AZ)

On-site

USD 42,000 - 65,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Health care
Dental insurance
Vision insurance
Life and disability insurance
Paid time off
12 holidays per year
401k with company match
Education reimbursement

Job summary

Crane Aerospace and Electronics in Chandler, AZ is seeking a Quality Technician to inspect conformity, mentor inspectors, and assist in process improvements. Responsibilities include reviewing drawings, performing source inspections, and supporting DMIR activities withFAA familiarity.

The role emphasizes compliance with AS13001-like processes and internal procedures. The position requires a High School Diploma or equivalent and may involve training on CMM programming, audits, and corrective

Qualifications

  • 1-7 years of experience in a manufacturing environment.
  • Knowledge of basic mechanical and electrical measurement tools.
  • Knowledge of performing manufacturing process audits and feedback for process improvement.
  • Understand, interpret, relate and instruct others on internal, industry or customer specifications which relate to products and processes which are performed and audited.

Responsibilities

  • Evaluate products and processes to verify compliance with drawings and specs.
  • Obtain certification for and perform customer DQR source inspection and FAA DMIR activities.
  • Receive training to conduct Coordinate Measurement Machine (CMM) programming.
  • Assist in the preparation, review and approval of First Article Inspection Reports (FAIRs).
  • Perform internal audits and develop checklists to guide audits from process specs, work instructions, quality procedures, and military specifications.
  • Evaluate products for defective or damaged components, correct assembly, and dimensional conformity.
  • Observe in-process work to ensure compliance with guidelines in process specs and procedures.
  • Prepare NCRs or corrective actions as needed.
  • Debrief management and propose solutions to identified issues.

Skills

Mechanical measurement
Electrical measurement
Process auditing
Interpreting specifications

Education

High School Diploma or equivalent

Tools

CMM programming

Job description

Crane Aerospace and Electronics has an exciting opportunity for a Quality Techician at our Chandler, AZ location.

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You’ll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).

From supplying microwave products for GPS satellites to integrated assemblies for the latest innovative defense platforms, come join an industry-leading aerospace & defense manufacturer based in beautiful, sunny Chandler, Arizona. You’ll join a first-class, dynamic organization steeped in rich culture and an established track record of delivering customers premier, quality products. You’ll work shoulder-to-shoulder with prime OEMs and help us develop state-of-the art solutions – all in a family-first community with top-rated schools and an abundance of recreational activities. Start the next chapter of your career with Crane Aerospace & Electronics!

Quality Technicians are responsible for conformity inspection, source inspection, auditing, documenting, reviewing and recommending manufacturing process improvements, mentoring/training/assisting inspectors, DMIR activities

Job Summary:
Essential Functions:
  • Evaluate products and processes in accordance with engineering drawings, samples, inspection requirements, process specifications, procedures and other approved reference sources to verify compliance
  • Obtain certification (ex: AS13001 Supplier Self Release Training) for and perform customer DQR source inspection and FAA DMIR activities
  • Receive training as needed to conduct Coordinate Measurement Machine (CMM) programming and back up duties for inspection
  • Assist in the preparation, review and approval of First Article Inspection Reports (FAIRs)
  • Perform internal audits to comply with internal and customer guidelines. Develop checklists to be used as guidelines for audits from process specifications, work instructions, quality inspection procedures, corporate procedures, and industry or military specifications
  • Evaluate products for defective or damaged components, accurate assembly, fit, adjustment, dimensions, locations, identifications, cleanliness, finishes, wire routing, encapsulation, and other conditions, pertinent to acceptable sub-assemblies, assemblies, and end items
  • Observe work in process and determine compliance to operational guidelines specified in process specifications, work instructions, quality inspection procedures, heat treat log verifications and other internal and contractual requirements
  • Perform defect data sorting, reporting and trending functions to facilitate identification areas or trends requiring corrective action. Prepare NCRs or Corrective Actions as needed
  • Debrief appropriate levels of management from production leads to managers apprising them of acceptable and unacceptable activities and make viable recommendations for solution of problems when requested
Minimum Qualifications:

· Experience: 1-7 years of experience in a manufacturing environment

· Knowledge: Knowledge of basic mechanical and electrical measurement tools) or the ability to learn is desired; Knowledge of performing manufacturing process audits and feedback for process improvement

· Skills/Abilities: Understand, interpret, relate and instruct others on internal, industry or customer specifications which relate to products and processes which are performed and audited; Experience and/or training in process auditing.

  • Education/Certification: High School Diploma or equivalent.
  • Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR). Applicants selected could be subject to a Government security investigation and must meet the eligibility requirements for access to classified information.
Preferred Qualifications:
  • Prior work as a technician, quality inspector, supervisor, or senior production operator
  • Associates of Science degree or BA, BS degree
Working Conditions:
  • Working conditions are normal for a manufacturing environment

  • Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE.

· May be exposed to unusual environmental conditions such as loud noises, hot or cold temperatures, confined spaces, dust or fumes.

  • Flexible and willing to work overtime if necessary

Standing: 30% *percentage is approximate and may vary depending on work task

Sitting: 70% *percentage is approximate and may vary depending on work task

Lifting (in pounds): up to 35 pounds

Pushing (in pounds): up to 50 pounds

Mental/Visual: the use of microscopes/magnifying, etc

Workspace (line, cube, etc): Cubicle/line

Top Benefits:

As a team member at Crane Aerospace and Electronics, you’ll enjoy:

  • Benefits:Health care, dental, vision, life and disability insurance starting the first day of the month
  • Time Off:15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.
  • 401k Retirement Plan:401k plan with company match
  • Education Reimbursement:eligible after 6 months of employment

You can see a list of our benefits at https://www.craneae.com/company/careersor visit our website atwww.CraneAE.comfor more information on our company and great opportunities.

We are committed to operational excellence and world class processes. We employ Lean manufacturing techniquesto optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Technician
Quality Technician

Crane Aerospace & Electronics, Inc. • Chandler (AZ)

On-site
USD 52,000 - 76,000
Health care
Dental, vision, life and disability
401k plan with company match
Quality Technician
Quality Technician

Crane Co. • Chandler (AZ)

On-site
USD 25,000 - 39,000
Health, dental, vision, life insurance
Paid time off + holidays
401(k) with company match
+1
Quality Technician
Quality Technician

340 Crane Electronics, Inc. • Chandler (AZ)

On-site
USD 42,000 - 56,000
Health care
PTO and holidays
401k with company match
+1
Quality Supervisor
Quality Supervisor

Hardware FYI • Caldwell (NJ)

On-site
USD 118,000 - 145,000
Health care
Dental insurance
Vision insurance
+4
Quality Technician
Quality Technician

Crane Aerospace & Electronics • California

On-site
USD 30,000 - 47,000
Quality Specialist – Mechanical Inspection (First Shift)
Quality Specialist – Mechanical Inspection (First Shift)

211 Hydro-Aire Aerospace Corp. • United States

On-site
USD 41,000 - 58,000
Health care
Dental insurance
Vision insurance
+6
Quality Specialist – Mechanical Inspection (First Shift)
Quality Specialist – Mechanical Inspection (First Shift)

Crane Aerospace & Electronics • Burbank (CA)

On-site
USD 41,000 - 51,000
Health care
Dental insurance
Vision insurance
+3
Quality Specialist – Mechanical Inspection (First Shift)
Quality Specialist – Mechanical Inspection (First Shift)

Crane Company • Burbank (CA)

On-site
USD 41,000 - 59,000
Health care
Dental
Vision
+3
Electronics Technician III
Electronics Technician III

340 Crane Electronics, Inc. • Chandler (AZ)

On-site
USD 60,000 - 85,000
Health care
Dental insurance
Vision insurance
+5
Electronics Technician III
Electronics Technician III

Crane Company • Chandler (AZ)

On-site
USD 60,000 - 80,000
Healthcare
Dental & Vision Insurance
Paid time off (PTO)
+2