Quality Inspector II

Regal Rexnord - Aerospace Solutions; Twinsburg (OH); On-site; USD 52,000 - 76,000; Full time

Benefits offered by this job

Medical coverage

Dental coverage

Vision coverage

Rx coverage

HSA/FSA

Paid time off

401k with match

Life insurance

AD&D insurance

Tuition assistance

Job summary

Regal Rexnord - Aerospace Solutions in Twinsburg, OH invites a Quality Inspector IIA to ensure conformance to aerospace specifications. You will perform final, in-process, and first article inspections, document NCRs, and support SQDC goals. Proficiency with CMMs, calipers, micrometers, and vision systems is required, with strong GD&T and metrology foundations.

US Persons only. The role requires 2–3 years of aerospace inspection, AS9100 familiarity, and excellent communication to coordinate with

Qualifications

• US Person required: US citizen or permanent resident
• 2–3 years inspection experience in a manufacturing environment
• Aerospace DSQR experience a plus
• Knowledge of ISO 9000/AS9100 and FAA regulations preferred
• AS9102 First Article Inspection (FAI) knowledge a plus
• Strong math and metrology knowledge; GD&T understanding
• Calibration/metrology systems experience; gauge design and verification

Responsibilities

• Adhere to safety rules and work policies.
• Perform final, receiving QC, Pre/Post OSP, in-process and first article inspections.
• Create NCRs when discrepancies are found and segregate nonconforming material.
• Maintain SQDC metrics and ensure proper paperwork discipline.
• Coordinate with quality team to keep processes flowing.
• Escalate quality issues or stoppages immediately.
• Set up and adjust gauges per specifications; verify gauges regularly.
• Support design/quality engineering on gauging improvements.
• Assist manufacturing with troubleshooting gauge issues and root cause analysis.

Skills

Final Inspection

In-Process Inspection

FAI

AS9100

GD&T

SPC

GR&R

Cpk

Root Cause Analysis

Problem Solving

Communication

Education

High school diploma or equivalent

ASQ Certified CQT

Tools

CMM

Calipers

Micrometers

Dial indicators

Vision systems

Gauges

Job description

Work Model: This is a fully onsite role, with work performed at your designated Regal Rexnord Twinsburg location. Our Benefits start day 1 - Join a great team Today!Quality Inspector IIAerospace Business UnitRexnord Aerospace supplies high performance spherical and cylindrical bearings, mechanical seals, gears and electrical components to commercial air transport markets. Our products are engineered to meet stringent requirements and are specified in engine systems, flight control systems, landing gear systems and airframe structures. Our global customer base includes major engine and airframe OEMs, tier suppliers and aircraft operators.Job Summary:This position is a critical link between the shop floor associates, and the engineering specifications and requirements. The person in this role will ensure that quality performance standards are met and takes appropriate action where necessary to meet agreed deadlines, quality performance, and production targets. The Quality Inspector is proficient using standard measurement tools such as calipers, micrometers, height stands, dial indicators, comparators, and vision systems to verify products and improve problem-solving and implementation of improvements. This individual will help drive improvements and increase our overall Quality position with our customers.Key Accountabilities:Ensure strict adherence to and implementation of Company Safety and Work rules.Perform inspection operations in each of the following areas:- Final InspectionReceiving QC InspectionPre/Post OSP InspectionIn-Process InspectionFirst Article InspectionResponsible for creation of nonconformance documentation (NCRs) when discrepancies are detected at any inspection stage. Removal of the discrepant material from the production areas.Maintain and support SQDC (Safety, Quality, Delivery, and Cost) metrics in all areas assigned.Ensure that all quality requirements are being followed including procedural compliance and defect reporting. Act as a liaison between production associates and quality requirements.Maintaining all inspection data during daily inspections and responsible for ensuring all paperwork is in its proper place at the end of the shift.Communicate and coordinate with other members of the Quality team to ensure that all areas flow efficiently. Aid in absenteeism coverage to ensure all production requirements are met.Escalate production and assembly quality issues or work stoppages caused by a quality issue immediately.Set up and adjust gauges using required equipment or masters per specification requirements. This includes periodic verifications of gage set-up.Work with quality engineering in the design of new or modified gauging when required.Ability to help the manufacturing area in troubleshooting and resolving gage issues.Qualifications:This position requires the applicant to be a US Person with a US permanent residence. A US Person is a US Citizen or Permanent ResidentHigh school diploma or equivalent.2-3 years of Inspection experience in a manufacturing environment demonstrating increasing accountability.2-3 years previous Aerospace DSQR experience a plusQualified experience, ASQ Certified CQT CMI a plusThorough knowledge of the AS9102 (FAI’s) First Article Inspection process, and Quality Planning tools (including SPC, GR&R, Cpk, GD&T, DMAIC, First Piece Inspection, Cost of Quality)Understanding and basic knowledge of all aviation industry compliance standards required, including ISO and AS 9000 quality systems, ISO 10012, AS9100, ISO9001, FAA FAR regulationsStrong application knowledge of calibration and metrology systems including the development, improving, and approving gauging methodologies and design. Qualifications should include general or application knowledge of; quality assurance systems, Geometric dimensioning and tolerancing (GD&T), blue print interpretation, and process capability analysis.Effective communication skills – strong written and verbal communication skills. Including developing, implementing, and maintaining procedures, work instructions, and related forms that support the Quality systemBasic math aptitude.Working knowledge of engineering part drawings and general understanding of metallurgy; ability to understand the physical and mechanical properties of metals as affected by composition, mechanical working and heat treatments including metal cutting and grinding is desirable.Demonstrated proficiency in time and project managementTraining and experience in Microsoft Office.Ability to lift up to 50 pounds repetitively throughout the shift.BenefitsMedical, Dental, Vision and Prescription Drug CoverageSpending accounts (HSA, Health Care FSA and Dependent Care FSA)Paid Time Off and Holidays401k Retirement Plan with Matching Employer ContributionsLife and Accidental Death & Dismemberment (AD&D) InsurancePaid LeavesTuition AssistanceYou should be proficient in:5 Why (Root Cause Analysis Method)Advanced Product Quality Planning (APQP)AS9100 Quality SystemsAdvanced Inspection & Gauge MeasurementAerospace ManufacturingFirst Article Inspection (FAI)AS9100 ExperienceMachines & technologies you'll use:Coordinate Measuring Machine (CMM)Measurement GaugesCalipers and Micrometers