Quality Inspector

Aerotek; Tualatin (OR); On-site; USD 30,000 - 33,000; Full time

Benefits offered by this job

Weekly pay

Medical, dental & vision

401(k) Retirement Plan

Life Insurance

Job summary

Aerotek is hiring a Quality Inspector in Tualatin, OR, on a contract-to-hire basis. You will perform first piece, in-process, and final inspections to ensure PCB and solder joint quality per IPC-610 standards, using SAP to guide methods and record results.

Preferred candidates have IPC-610 certification, experience with AS9100 environments, and hands-on use of optical comparators and microscopes to inspect tiny parts. This role emphasizes precision, documentation, and continuous improvement.

Qualifications

• IPC-610 certification is highly desirable.
• AS9100 quality environment experience is preferred.
• Experience using optical comparators for dimensional inspection.
• Hands-on microscope work for detailed visual inspection of small components.
• Comfort working with PCBs and electronic components in precision manufacturing.

Responsibilities

• Inspect and test small parts during first piece, in-process, and final inspections.
• Work from drawings and specs to perform accurate inspections.
• Verify product compliance against dimensional and customer specifications.
• Follow inspection methods documented in SAP ERP system.
• Ensure outgoing shipments match part numbers and PO requirements.
• Generate Defective Material Reports for nonconforming products.
• Use calipers, micrometers, pin gauges, microscopes, and optical comparators for measurement.
• Promote continuous improvement of quality processes and inspection methods.
• Maintain a clean, safe, and organized inspection area.

Skills

IPC-610 certification

Optical inspection

AS9100 experience

Microscope inspection

PCB/component handling

Education

IPC-610 certification (is desirable)

Tools

SAP

Optical comparators

Microscopes

Job description

Job Title: Quality Inspector

Job Description

The Quality Inspector performs diversified inspection and testing of small and very small parts throughout the manufacturing and machining process. This role focuses on first piece, in-process, and final product inspection to ensure precise dimensional accuracy and strict adherence to customer and internal specifications, with a particular emphasis on PCB and solder joint quality in accordance with IPC-610 standards.

Responsibilities

• Inspect and test small and very small parts during various stages of the manufacturing and machining process, including first piece, in-process, and final product inspections.

• Work from semi-complicated specifications, engineering drawings, and other technical documentation to perform accurate inspections.

• Ensure product compliance by inspecting product characteristics against defined dimensional and customer specifications.

• Verify that proper inspection methods are followed as documented in the ERP system (SAP).

• Confirm that outgoing shipments match the correct part numbers and the requirements of purchase orders.

• Verify the accuracy and completeness of vendor certifications associated with incoming materials and components.

• Conduct workstation audits in designated areas as required to support quality standards and process compliance.

• Check parts for correct count, surface finish, quality of workmanship, and general appearance.

• Make final determinations on whether parts meet established inspection criteria and quality standards.

• Generate Defective Material Reports for products that do not conform to requirements, documenting issues clearly and accurately.

• Analyze products and individual pieces for compliance with process specifications and customer requirements.

• Translate technical specifications into practical inspection steps and methodology to ensure consistent evaluation of parts.

• Use basic and advanced inspection equipment, including calipers, rulers, micrometers, pin gauges, microscopes, and optical comparators, to measure and evaluate parts.

• Perform inspection-related functions within the company's ERP system (SAP), including data entry and review of inspection instructions.

• Verify measurements in both millimeters and inches and accurately convert between metric and imperial units.

• Handle small and fragile parts with care, maintaining minimal errors during inspection and handling.

• Participate in and promote continuous improvement initiatives related to quality processes and inspection methods.

• Maintain a clean and organized work area that supports safe and efficient inspection activities.

• Adhere to all applicable quality standards and procedures, including those related to AS9100 and ISO environments when applicable.

Additional Skills & Qualifications

• Formal IPC-610 certification is highly desirable.

• IPC-620 certification is a plus.

• Experience using optical comparators for dimensional inspection.

• Hands-on microscope work for detailed visual inspection of small components.

• Experience working within an AS9100 quality management system environment.

• Familiarity with ISO-based quality environments and procedures.

• Experience in quality control, quality assurance, or quality inspection within a manufacturing setting.

• Experience performing first article inspections and visual quality checks.

• Comfort working with PCBs and electronic components in a precision manufacturing environment.

Why Work Here?

You will join a quality-focused manufacturing environment that values precision, consistency, and continuous improvement. The organization supports professional growth through exposure to recognized industry standards such as IPC, AS9100, and ISO, and encourages employees to enhance their technical expertise in inspection tools and ERP systems. A structured day-shift schedule promotes work-life balance, while a culture of collaboration and clear communication ensures that quality professionals can contribute meaningfully to process improvements and product excellence.

Work Environment

This role operates in a day-shift schedule, Monday through Friday from 7:00 a.m. to 3:30 p.m., providing a stable and predictable work routine. The work is performed in a manufacturing and machining environment where moderate to loud noise levels are typical. Employees may encounter temperature variations, including cold, heat, and general climate changes, as well as exposure to chemical agents and occasional contact with water or other liquids. The position involves frequent sitting and standing, walking, bending, squatting, and fine finger movements for detailed inspection work. You will regularly handle small parts and use inspection equipment such as calipers, micrometers, rulers, pin gauges, microscopes, and optical comparators, supported by an ERP system (SAP) to guide inspection methods and record results.

Job Type & Location

This is a Contract to Hire position based out of Tualatin, OR.

Pay and Benefits

The pay range for this position is $22.00 - $24.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Tualatin, OR.

Application Deadline

This position is anticipated to close on Nov 6, 2026.

Workplace Type

This is a fully onsite position in Tualatin,OR.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.