Quality Inspector

Crane Aerospace & Electronics

Ohio

On-site

USD 41,000 - 58,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Crane Aerospace & Electronics Elyria, OH seeks a Quality Inspector on 2nd shift to perform diversified inspections and validate conformance to specifications using standard equipment. Training will occur on 1st shift for up to six months.

Responsibilities include creating inspection plans, reviewing test data, and ensuring proper documentation and traceability. Candidates should have CMM and GD&T proficiency and blueprint-reading skills.

Qualifications

  • High School Diploma required.
  • Prior calibration experience preferred.
  • Must have CMM experience and surface plate inspection experience.
  • Must have working knowledge of GD&T.
  • Must read blueprints and manufacturing outlines.

Responsibilities

  • Perform diversified inspection activities per plans and specifications using standard inspection equipment.
  • Lay out castings for verification of cleanup at machining operations.
  • Create inspection plans aligned with processes and drawings.
  • Review product test data for compliance and validate with acceptance stamps.
  • Document non-conformances and maintain accurate records.
  • Work with internal/external customers and suppliers on quality issues.

Skills

CMM experience
GD&T
Blueprint reading
Surface plate inspection
Basic math
Computer literacy

Education

High School Diploma

Tools

CMM
Rotary tables
Height stands
Electro limit/shadow gauges
Profilometer
Micrometers

Job description

Crane Aerospace and Electronics has an exciting opportunity for a Quality Inspector- 2nd Shift at our Elyria, OH location.

Hours are Monday-Friday 3:00pm-11:30pm (will train in 1st shift 6:30am-3pm for up to 6 months)

Hourly pay: $35.81

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).

Our Crane Aerospace & Electronics Elyria facility has been a bedrock in the community-friendly town of Elyria, Ohio, for more than a century. Known for our excellence in pumping technology, our Elyria site produced the first-ever positive displacement pump for high performance piston engine aircraft and even supplied pumps for Charles Lindbergh in the 1930s. We have more than 150,000 fuel and lubrication pumps in service today and are proud to offer custom thermal management system solutions for a range of next-gen applications. Start the next chapter of your career with Crane Aerospace & Electronics!

Job Summary:

The Quality Inspector will perform highly diversified inspection activities per inspection plans, blueprints, or manufacturing outlines and determine conformance to published specifications using standard inspection equipment.

Essential Functions:
  • Perform highly diversified inspection activities per inspection plans, blueprints, or manufacturing outlines and determine conformance to published specifications using standard inspection equipment.
  • Lay out of castings for verification of cleanup at subsequent machining operations.
  • Create inspection plans in line with manufacturing processes and drawing specifications.
  • Pull inspection plans and request appropriate gauges.
  • Review product test data for compliance to test specifications and validate with acceptance stamp.
  • Review respective shipping documents for conformance to contract, purchase orders, and blueprint revisions.
  • Layout and perform highly diversified experimental and production inspections of various parts/assemblies, tools, fixtures, and measuring equipment.
  • Prepare and send out raw material samples.
  • Involves unlimited transfer to NDT/Calibration occupation as required.
  • Clean and move parts as necessary.
  • Pass an annual eye exam per:
    • NEAR VISION: Snellen 14/18 or better (20/25 or better Jaeger Type 2 at 14 inches, Ortho-Rater 8 or equivalent).
    • COLOR VISION: Average or normal (4 of 6 responses Titmus, B & L, or AD testing machines, or satisfactory responses when tested with Isihara or Pseudoisochromatic plates).
  • Perform routine maintenance per Appendix A and appropriate safety checks.
  • Responsible for product verification and process control including using necessary measuring devices.
  • Keep charts and records as required on completed sequences and processes.
  • Document all non-conformances through specified data collection procedures.
  • Complete all required paperwork.
  • Insure all material is properly cleaned, identified, protected, and stacked prior to movement.
  • Work with internal and external customers and suppliers and participate in continuous improvement activities as required.
  • Complete all required documentation including but not limited to operator inspection records, job routers, NCR's, reject tags, move tickets, and stock tickets.
  • Perform other duties as assigned by department supervisor.
  • Utilize computer to access various databases.
  • Perform 5S activities as required.
Minimum Qualifications:
  • High School Diploma
  • Prior calibration experience preferred
  • Must have previous CMM experience and surface plate inspection experience.
  • Must have working knowledge of GD&T
  • Prior experience using rotary tables, height stands, electro limit/shadow gauges, comparator, sine bar, profilometer and micrometers
  • Must have basic reading and writing skills
  • Requires basic math skills to make necessary calculations such as adding, subtracting, multiplying, and dividing
  • Must have sufficient knowledge of geometry and trigonometry.
  • Must be able to read and interpret blueprints, detail sheets, manufacturing outlines, and written instructions
  • Must be able to apply detailed techniques to products or parts
  • Proficient working computer knowledge
  • Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).
Physical Demands:
  • Requires prolonged periods of sitting, standing, bending, lifting, and stretching.
  • Requires lifting parts and equipment up to 50 pounds.
Work Environment:
  • Manufacturing shop floor environment.
  • Greasy, oil
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Inspector
Quality Inspector

Crane Company • Elyria (OH)

On-site
USD 41,000 - 58,000
Health care, dental, vision
Education reimbursement
CNC Bearing Machinist- 2nd Shift- $38.85 Plus $1,000 Sign-on Bonus
CNC Bearing Machinist- 2nd Shift- $38.85 Plus $1,000 Sign-on Bonus

Crane Company • Elyria (OH)

On-site
USD 44,000 - 63,000
NDT Inspector (Level II MT and PT)
NDT Inspector (Level II MT and PT)

Crane Co. • Elyria (OH)

On-site
USD 40,000 - 57,000
Health care
Education reimbursement
NDT Inspector (Level II MT and PT)
NDT Inspector (Level II MT and PT)

Crane Aerospace & Electronics, Inc. • Elyria (OH)

On-site
USD 40,000 - 57,000
Health insurance
Education reimbursement
Life and disability insurance
Quality Specialist – Mechanical Inspection (First Shift)
Quality Specialist – Mechanical Inspection (First Shift)

Crane Aerospace & Electronics • Burbank (CA)

On-site
USD 41,000 - 51,000
Health care
Dental insurance
Vision insurance
+3
Quality Specialist – Mechanical Inspection (First Shift)
Quality Specialist – Mechanical Inspection (First Shift)

Crane Company • Burbank (CA)

On-site
USD 41,000 - 59,000
Health care
Dental
Vision
+3
Quality Technician
Quality Technician

Crane Company • Chandler (AZ)

On-site
USD 42,000 - 65,000
Health care
Dental insurance
Vision insurance
+5
Quality Supervisor
Quality Supervisor

Crane Company • West Caldwell (NJ)

On-site
USD 78,000 - 110,000
Quality Specialist – Mechanical Inspection (First Shift)
Quality Specialist – Mechanical Inspection (First Shift)

211 Hydro-Aire Aerospace Corp. • United States

On-site
USD 41,000 - 58,000
Health care
Dental insurance
Vision insurance
+6
Night Shift Final QA Inspector - Aerospace & CMM
Night Shift Final QA Inspector - Aerospace & CMM

Accurus Aerospace Corporation • Tulsa (OK)

On-site
USD 52,000 - 72,000