Quality Inspector

Technique LLC; Concord (NC); On-site; USD 55,000 - 75,000; Full time

Benefits offered by this job

Paid Time Off

Health Insurance

Dental Insurance

Vision Insurance

Life Insurance

Disability Insurance

Health Savings Account

Flexible Spending Account

401(k)

401(k) Matching

Professional Development

Referral Program

Paid Training

On The Job Training

Employee Assistance Program

Tuition Reimbursement

Job summary

Technique LLC seeks a Quality Inspector for our Concord, NC facility to ensure chassis and welded assemblies meet NASCAR specs. You’ll perform incoming, in‑process, and final inspections, including dimensional checks and laser metrology, while maintaining strict traceability.

The role requires 3+ years in quality inspection in fabrication or precision manufacturing, blueprints and GD&T proficiency, and the ability to work under race-season deadlines with attention to detail.

Qualifications

• High school diploma or equivalent; technical/associate degree preferred
• Minimum 3 years quality inspection experience in fabrication, welding, or precision manufacturing
• Motorsports, aerospace, or other high‑precision, low‑volume manufacturing experience a strong plus
• Strong blueprint reading skills and working knowledge of GD&T (ASME Y14.5)
• Proficiency with precision measuring instruments, including calipers, micrometers, height gauges, and bore/gage inspection
• Experience with laser scanning, laser trackers, CMM, and Polyworks; willingness to be trained required
• Welding inspection knowledge; CWI or CAWI certification a plus
• Familiarity with ISO 9001, nonconforming material control, and calibration requirements
• ASQ CQI (Certified Quality Inspector) certification a plus
• Strong attention to detail and teamwork

Responsibilities

• Incoming Inspection of materials, tubing, sheet stock, and outsourced components with certifications and paperwork
• In‑Process inspection at defined points during fabrication, welding, and assembly
• Final inspection to verify NASCAR drawings and specifications before shipment
• First Article inspections and dimensional reports
• Dimensional verification using calipers, micrometers, height gages, and other tools
• Operate laser scanners, laser trackers, CMM, and Polyworks for CAD model comparison
• Weld inspection per AWS and customer requirements; dye penetrant/magnetic particle inspection per direction
• Verify chassis jigs, fixtures, and inspection fixtures for accuracy
• Record serial numbers, material certs, weld records, and inspection results for traceability
• Support root cause investigations (8D, 5 Why) and MRB activities
• Coordinate with fabrication teams to keep race-season deadlines

Skills

Blueprint reading

GD&T

Metrology

Welding inspection knowledge

QA documentation

Education

High school diploma or equivalent

Technical or associate degree in quality/manufacturing (preferred)

Tools

Laser scanning

Laser trackers

CMM

PolyWorks

Calipers

Micrometers

Job description

Technique is looking for a Quality Inspector to join our team at our Concord, North Carolina facility, home to Technique’s NASCAR operations. Reporting to the Quality Manager, the Quality Inspector makes sure the chassis, welded tubular structures, and race-ready assemblies we build meet NASCAR drawings and specifications before they leave our building. This hands‑on, floor‑based role covers incoming, in‑process, and final inspection, including dimensional checks, weld inspection, laser scanning, and keeping the serialized traceability records that every part we ship requires.

The ideal candidate has 3+ years of quality inspection experience in a fabrication, welding, or precision manufacturing environment, and motorsports experience is a strong plus. They read blueprints and GD&T with confidence, are comfortable with both hand gages and portable metrology like laser scanners and laser trackers, and know what a good weld looks like. Attention to detail, sound judgment, and the ability to keep up with race‑season deadlines without cutting corners are essential.

Responsibilities:

• Incoming Inspection – Inspect purchased material, tubing, sheet stock, and outsourced components, and verify material certifications, heat lots, and supplier documentation before release to production.
• In‑Process Inspection – Perform inspections at defined points during fabrication, welding, and assembly according to Control Plans and inspection instructions.
• Final Inspection – Complete final dimensional and visual inspection of chassis, sub‑assemblies, and components to confirm they conform to NASCAR drawings and specifications before shipment.
• First Article Inspection – Perform first article inspections on new and revised parts and assemblies, and prepare the dimensional reports.
• Dimensional Verification – Measure parts and assemblies using calipers, micrometers, height gages, pin gages, protractors, and other precision measuring tools.
• Laser Scanning & Metrology – Operate laser scanners, laser trackers, and/or CMM equipment, and use Polyworks to scan, align, and evaluate chassis and components against CAD models.
• Weld Inspection – Visually inspect welds on tubular structures and fabricated parts against AWS and customer requirements; perform or support dye penetrant and magnetic particle inspection as directed.
• Fixture & Jig Checks – Verify chassis jigs, holding fixtures, and inspection fixtures for accuracy and condition, and report wear or damage to the Quality Manager.
• Assembly Verification – Verify torque values, hardware installation, error‑proofing, and functional checks on race‑ready assemblies.
• Serialization & Traceability – Record serial numbers, material certs, weld records, and inspection results accurately so every chassis and critical component has full traceability.
• Nonconforming Material – Identify, tag, segregate, and document nonconforming material, and support MRB activities with inspection data.
• Inspection Records – Complete inspection reports, checklists, and quality records accurately and on time, following document control procedures.
• Calibration Support – Use only calibrated equipment, check gage calibration status before use, and support the calibration recall program.
• Root Cause Support – Provide data, measurements, and observations to support root cause and corrective action (8D, 5 Why) investigations.
• Production Collaboration – Work closely with fabricators, welders, and assemblers to communicate quality issues quickly and help keep parts moving on schedule.
• Customer Inspections – Support customer source inspections and certification activities with NASCAR and race team representatives as needed.
• Continuous Improvement – Suggest improvements to inspection methods, fixtures, and processes that improve quality and efficiency.
• Workplace Safety & 5S – Keep the inspection area and equipment clean, organized, and safe, and follow all safety and PPE requirements.

Requirements:

• High school diploma or equivalent required; technical or associate degree in quality, manufacturing, or a related field preferred
• Minimum 3 years of quality inspection experience in a fabrication, welding, or precision manufacturing environment
• Motorsports, aerospace, or other high‑precision, low‑volume manufacturing experience a strong plus
• Strong blueprint reading skills and working knowledge of GD&T (ASME Y14.5)
• Proficiency with precision measuring instruments, including calipers, micrometers, height gages, and bore and pin gages
• Experience with laser scanning, laser trackers, CMM, and/or Polyworks preferred; willingness to be trained required
• Working knowledge of weld inspection; CWI or CAWI certification a plus
• Familiarity with dye penetrant and magnetic particle inspection preferred
• Basic understanding of ISO 9001 quality systems, nonconforming material control, and calibration requirements
• ASQ CQI (Certified Quality Inspector) certification a plus
• Strong attention to detail with accurate, thorough documentation habits
• Good communication skills and the ability to work closely with production teams
• Basic computer skills, including Microsoft Office and data entry
• Ability to work under tight deadlines in a fast‑paced, race‑schedule‑driven environment
• Flexibility to work extended hours or weekends during peak race‑season demand
• Active position requiring continuous production floor presence; must be able to stand, walk, bend, kneel, stoop, crouch, climb, and occasionally lift up to 35 pounds
• Vision requirements: close, distance, color, peripheral, depth perception, and ability to adjust focus
• Frequent exposure to fumes, airborne particles, hazardous chemicals, moving mechanical parts, industrial equipment, vibration, and loud noise; appropriate PPE required
• Occasional local travel to customers or race teams in the Charlotte/Concord/Mooresville area may be required

Technique is a Michigan‑based precision sheet metal and welded assemblies manufacturer serving aerospace, defense, automotive, motorsports, medical, and food processing industries. We specialize in high‑speed prototypes, ultra‑low volume stampings, tubing, and assemblies for production and emergency‑based manufacturing.

Our employees enjoy a work culture that values safety, integrity, teamwork, learning opportunities, and results.

Technique benefits include paid time off, health insurance, dental insurance, vision insurance, life insurance, disability insurance, health savings account (HSA), flexible spending account (FSA), 401(k), 401(k) matching, professional development, referral program, paid training, on‑the‑job training, employee assistance program, and tuition reimbursement.

• Paid Time Off
• Health Insurance
• Vision Insurance
• Life Insurance
• Disability Insurance
• Health Savings Account
• Flexible Spending Account
• 401(k)
• 401(k) Matching
• Professional Development
• Referral Program
• Paid Training
• On The Job Training
• Employee Assistance Program
• Tuition Reimbursement

Other Duties:

This job description is not a comprehensive listing of all activities, duties, or responsibilities; duties may change at any time with or without notice. EEO Statement: Technique, Inc. is an equal employment opportunity employer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.