Quality Inspection 4 – Federal Ammunition

Remington Arms

Anoka (MN)

On-site

USD 33,000 - 47,000

Full time

9 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Day-one healthcare coverage
Company-paid parental leave
401(k) match up to 6%
Career development opportunities
Education assistance
Paid time away from work

Job summary

Remington Arms in Anoka, MN seeks a Quality Inspector to uphold safety and quality standards. You will collect samples, perform visual and dimensional inspections, and document results while coordinating with Operations on quality issues.

The role reports to the Quality Assurance Manager and requires the ability to work a 12-hour shift, including nights. Strong organizational skills and teamwork are essential, with growth opportunities in a manufacturing environment.

Qualifications

  • High School Diploma or GED required.
  • Must be 18 years or older with strong organizational skills.
  • Ability to learn to use precision measuring devices within 30 days.
  • Good verbal and written communication skills.
  • Ability to work 12-hour shifts and team-based environment.

Responsibilities

  • Follow safety rules and keep area clean and orderly.
  • Perform visual and dimensional inspection and document results.
  • Notify leadership of defective levels and quality issues.
  • Disassemble and handle ammunition components and products.
  • Fill out inspection paperwork and inspect loaded rounds.
  • Follow 5S and maintain clean work areas.

Skills

Quality inspection
Safety procedures
Teamwork
Kaizen
Communication skills

Education

High School Diploma/GED

Tools

Precision measuring devices
Gages
Computers

Job description

Pay Range: $24.25 - $34.02 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer.

Job Description

As the Quality Inspector you will work safely and maintain all quality standards; thereby ensuring customers receive quality products.

Duties include collecting product samples, visual and dimensional inspection, and inspection documentation. Communicates with Operations when there are quality issues discovered. This position reports to the Quality Assurance Manager and is based out of our Anoka Location.

Available Shifts: Q: Fri, Sat, Sun, and every other Thurs 7pm-7am
Please note your desired shift(s) on your resume or application when applying for this position.

What you’ll do
  • Safety – Follow all rules and procedures; keep area neat and orderly; report all existing or potential safety hazards/issues to leadership immediately. Utilize Safety Observation system.
  • Environmental/hazardous waste – Understand and follow all procedures.
  • Quality – Understand all product quality requirements and procedures, insure they are met. Notify leadership of excessive defective levels. Understand how defects can impact final customers including Law Enforcement and Military.
  • Teamwork – Be an effective team member.
  • Continuous Improvement – Contribute your ideas through the Kaizen card process.
  • Work the hours scheduled for the assigned shift plus overtime as needed.
  • Disassemble and handle ammunition components and products.
  • Fill out paperwork.
  • Inspect/audit loaded rounds.
  • Follow 5S and clean up protocols.
  • Perform other duties as assigned.
Experience you bring
  • High School Diploma/GED.
  • 18 years of age or older.
  • Must have demonstrated strong organizational skills and strong work ethic.
  • No disciplinary action at a report of Conference level or about in the past 12 months.
  • Must be able to learn to use computers and/or precision measuring devices within 30 days.
  • Good communication skills, both verbally and in writing.
  • Must be able to work 12 hours on assigned shift.
  • Demonstrated ability to work effectively in a team environment.
  • Ability to work independently without continual supervision.
You might have
  • Experience working in a manufacturing environment (high volume preferred.)
  • SPC – Statistical process control experience.
  • Gauging experience.
Physical Requirements

Standing and moving for about 90% of the time. Reaching, handling, fingering and manual dexterity to assemble and inspect. Occasional lifting and moving objects up to 50 lbs. Near vision for detecting quality defects. Must have normal color vision and normal depth perception capability. Climbing, stooping, bending and crouching on a daily basis.

Mental Requirements

High level of mental attentiveness for safety, quality and to manipulate and visually inspect small parts. Reading and basic math comprehension to understand and interpret training guides, standard operating procedures, and quality information (charts, graphs, etc.). Interpersonal communication skills to facilitate problem‑solving and to function effectively as part of a work team. (Reasoning Ability) Ability to define problems, collect data, establish facts, and draw valid conclusions.

Equipment Used

Operation of hand tools, Gages, telephone, calculator, personal computer, copier/printer.

Working Environment

Manufacturing floor environment is subject to exposure to noise, vibration, summer heat, moving objects and mechanical equipment hazards. Work is often done as an individual, but may also work with the team. Employee work assignments may include tasks working with and/or exposure to potentially hazardous areas, including flammables and explosives. Safety training is provided to all employees to ensure compliance with company and federal regulations.

Benefits
  • day‑one healthcare coverage
  • company‑paid parental leave
  • a dollar‑for‑dollar 401(k) match up to 6%
  • career development opportunities
  • education assistance
  • paid time away from work to help you thrive both professionally and personally
Equal Opportunity Employer

Minorities/Females/Protected Veteran/Disabled International Traffic in Arms Regulation (ITAR) and Export Administration Regulation (EAR) Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national; (ii) U.S. lawful, permanent resident (a/k/a green card holder); (iii) Refugee under 8 U.S.C. Section 1157; or (iv) Asylee under 8 U.S.C. Section 1158 or be eligible to obtain the required authorizations from the U.S. Department of State.

Gun Control Act Requirements: It is unlawful for these categories of persons to possess (for business or personal reasons) firearms or ammunition: (i) convicted of a crime punishable by imprisonment for a term exceeding one year; (ii) fugitive from justice; (iii) unlawful user of or addicted to any controlled substance (as defined in section 102 of the Controlled Substance Act 21 U.S.C. 802); (iv) who has been adjudicated as a mental defective or has been committed to any mental institution; (v) illegal alien; (vi) discharged from the Armed Forces under dishonorable conditions; (vii) who has renounced his or her United States Citizenship; (viii) who is subject to a court order restraining the person from harassing, stalking, or threatening an intimate partner or child of the intimate partner; or (ix) who has been convicted of a misdemeanor crime of domestic violence.

Across The Kinetic Group, we rally for the customer by fostering collaboration, sharing insights and scaling competencies. We engineer our products in ways that match the drive of the people who put them to work in the field, on the course and on the battlefield. We’re not just a name on the door — we are the people developing the products that help customers the world over. The Kinetic Group is an equal opportunity employer. All applicants are considered for employment without to regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, and any other characteristics protected by law.

The EEO Law poster is available here: http://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf

If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e‑mail to careers@tkghunt.com.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sr. Manufacturing Engineer - Federal Ammunition
Sr. Manufacturing Engineer - Federal Ammunition

Remington Arms • Anoka (MN)

On-site
USD 86,000 - 124,000
day-one healthcare coverage
company-paid parental leave
401(k) match up to 6%
+3
Security Officer – Federal Ammunition
Security Officer – Federal Ammunition

Remington • Anoka (MN)

On-site
USD 25,000 - 36,000
Healthcare (day-one)
401(k) match
Career development
+2
Assembler - Federal Ammunition
Assembler - Federal Ammunition

Remington Arms • Anoka (MN)

On-site
USD 43,000 - 55,000
Medical and dental insurance
Vision insurance
Disability and life insurance
+4
Manufacturing Tech- 12 hour rotating night shift
Manufacturing Tech- 12 hour rotating night shift

Remington Arms • Lonoke (AR)

On-site
USD 29,000 - 37,000
Day-one healthcare
Parental leave
401(k) match
+3
Maintenance Mechanic - 12 hour night shift 4:30pm-4:45pm
Maintenance Mechanic - 12 hour night shift 4:30pm-4:45pm

Remington Arms • Lonoke (AR)

On-site
USD 56,000 - 64,000
Day-one healthcare coverage
Company-paid parental leave
Dollar-for-dollar 401(k) match up to 6
+3
International Trade Compliance Lead
International Trade Compliance Lead

Remington Arms • Anoka (MN)

On-site
USD 89,000 - 124,000
Continuous Improvement Engineer
Continuous Improvement Engineer

Remington Arms • Lonoke (AR)

On-site
USD 70,000 - 97,000
Day-one healthcare coverage
Parental leave
401(k) match up to 6%
+3
Manufacturing Project Engineer II-IV - Federal Ammunition
Manufacturing Project Engineer II-IV - Federal Ammunition

Remington Arms • Anoka (MN)

On-site
USD 89,000 - 124,000
Day-one healthcare coverage
Parental leave
401(k) match up to 6%
+3
Machinist - Federal Ammunition
Machinist - Federal Ammunition

Remington Arms • Anoka (MN)

On-site
USD 72,000 - 94,000
Medical and dental benefits
Vision insurance
401K
+3
Quality Engineering Internship - Remington Ammunition
Quality Engineering Internship - Remington Ammunition

Remington Arms • Lonoke (AR)

On-site
USD 18,000 - 36,000
Day-one healthcare coverage
Dollar-for-dollar 401(k) match up to 6
Education assistance
+1