Quality Control Technician

Barksdale Control Products

Jurupa Valley (CA)

On-site

USD 30,000 - 39,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Crane ChemPharma & Energy is seeking an entry-level Quality Control Tech I to learn under supervision and progress toward NDE Level 2 in VT, RT, and PT. The role focuses on welding inspection, reading blueprints, and ensuring fabrication meets design specifications.

You will gain hands-on experience with GTAW and GMAW processes, perform visual inspections, document results, and coordinate with team members to resolve quality issues in a fast-paced shop environment.

Qualifications

  • High School Grad or GED; some college preferred.
  • Current NDE VT/PT/RT certifications or willingness to pursue Level 2.
  • Weld inspection experience and understanding of GTAW/GMAW processes.

Responsibilities

  • Inspect welded products for compliance with specifications and standards.
  • Report and address defects or non-conformities.
  • Measure dimensions and verify conformance to drawings and specs.
  • Read blueprints and determine inspection requirements.
  • Complete QA hold points and signoffs per drawing and code.

Skills

Attention to detail
Team player
Strong communication
MS Word/Excel basic data entry

Education

High School Diploma or GED
NDE VT/PT/RT certifications (or pursuing Level 2)

Tools

GTAW welding processes
GMAW welding processes

Job description

Quality Control Tech I – This is the entry level. The employee requires a high level of training and supervision. The employee will not perform tasks without direct supervision and should receive the necessary training and supervision from a certified NDT Lvl. 2 or Lvl 3 employee, lead, or manager. Employees at this level have minimum knowledge of welding inspection, applicable code, Cryoworks processes and procedures, vacuum jacket piping and related components. The employee is expected to learn through OJT and work toward completing the New Inspector Training Checklist.

Duties & Responsibilities Include but not limited to:
  • Work toward lvl 2 NDE certifications in VT, RT, and PT.
  • Inspect welded products for compliance with specifications and standards
  • Report and address any defects or non-conformities.
  • Perform inspection functions to ensure fabrication adheres to design specifications,
  • Evaluate and complete QA hold points per drawing and code specifications.
  • Review and process quality signoffs of fabrication travelers.
  • Compare physical characteristics of materials or products to specifications or standards.
  • Evaluate quality of materials or products.
  • Mark products, workpieces, or equipment with identifying information.
  • Measure dimensions of completed products or workpieces to verify conformance to specifications.
  • Notify others of equipment repair or maintenance needs.
  • Read work orders or other instructions to determine product specifications or Inspection requirements.
  • Record operational or production data.
  • Review blueprints or other instructions to determine operational methods or sequences.
  • Conduct receiving inspection for welded materials verifying compliance to applicable specifications and standards.
Testing
  • Inspect, test, or measure materials for conformance to specifications.
  • Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers.
  • Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing requirements
  • Mark items with details such as grade or acceptance-rejection status.
  • Notify supervisors or other personnel of production and quality related issues.
  • Discard or reject products, materials, or equipment not meeting specifications.
  • Write test or inspection reports describing results, recommendations, or needed repairs.
  • Recommend necessary corrective actions, based on inspection results.
Quality Control
  • Perform visual inspections of finished products.
  • Complete documentation needed to support inspection procedures i
  • Calibrate, validate, or maintain equipment.
  • Receive and inspect raw materials.
  • Investigate or report questionable test results.
  • Ensure cleanliness and safety standards are maintained.
Education, Work Experience, Skill Requirements & Certifications:
  • High School Graduate or GED equivalent/Some college preferred.
Required:
  • Have current NDE certifications VT, PT, RT or be willing to work toward Lvl 2 NDE certification.
  • Must have weld inspection related experience.
  • Must have a general understanding of GTAW and GMAW welding processes and related defects.
  • Previous NDE experience required
  • Ability to multi-task in a fast-paced warehouse environment
  • Must have good organizational skills and be detail oriented.
  • Ability to work a team environment.
  • Good communication, written and grammatical skills. Customer service oriented.
  • Entry level skills in Microsoft Word, Excel, Outlook and general data entry.
  • Applicants must be legally authorized to work in the United States without current or future employer sponsorship. In addition, due to applicable U.S. export-control requirements, this position requires U.S. person status.
Minimum License, Certifications & Affiliations/Memberships and CEU’s
  • Valid California driver’s license and an insured vehicle in good working order.
Special Requirement:
  • May be required to work weekends and holidays as business necessitates; schedules will be determined by management with at least 48 hours advance notice.
Work Environment:
  • Working in the shop, the following conditions may apply:
  • Includes exposure to sounds and noise levels that are distracting or uncomfortable.
  • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

About Crane: ChemPharma & Energy

Crane ChemPharma & Energy designs and manufactures a variety of high-performance products including highly engineered check valves, sleeved plug valves, lined valves, process ball valves, high-performance butterfly valves, bellows sealed globe valves, aseptic and industrial diaphragm valves, multi/quarter-turn valves, actuation, sight glasses, lined pipe, fittings and hoses, and air operated diaphragm and peristaltic pumps. Its trusted brands offer customers a complete and innovative product portfolio designed for the most demanding corrosive, erosive, and high purity applications. Primary industries served include chemical and petrochemical processing, biotechnology, pharmaceutical, and general industrial. As an integrated fluid handling solutions provider, Crane ChemPharma & Energy is well equipped to respond to complex global projects with comprehensive product packages and timely proposals to simplify our customers’ supply chain on a local level worldwide, at competitive market pricing.

#CPE

#LI-VD1

Salary/Hourly Range: $22 to $28. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Compensation packages also include comprehensive benefits, 401K contribution and match, Paid Time Off, paid holidays, tuition reimbursement and more. Some roles may be eligible for participation in performance-based bonus programs.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Control Technician
Quality Control Technician

Crane Company • Jurupa Valley (CA)

On-site
USD 30,000 - 39,000
401K
Paid time off
Holidays
+1
Pre-Fab Associate
Pre-Fab Associate

Crane Company • Jurupa Valley (CA)

On-site
USD 26,000 - 29,000
TIG Welder II / Welder III
TIG Welder II / Welder III

Crane Company • Jurupa Valley (CA)

On-site
USD 36,000 - 47,000
TIG Welder II / Welder III
TIG Welder II / Welder III

788 CryoWorks, Inc. • Jurupa Valley (CA)

On-site
USD 34,000 - 47,000
Pre-Fab Associate
Pre-Fab Associate

Crane ChemPharma & Energy • Jurupa Valley (CA)

On-site
USD 26,000 - 29,000
401K contribution and match
Paid Time Off
Tuition reimbursement
+1
Pre-Fab Associate
Pre-Fab Associate

788 CryoWorks, Inc. • Jurupa Valley (CA)

On-site
USD 26,000 - 29,000
Health benefits
401(k) with company match
Paid time off
+2
Demand Planner
Demand Planner

Crane Company • Jurupa Valley (CA)

On-site
USD 36,000 - 44,000
401K contribution and match
Paid Time Off
paid holidays
+1
Demand Planner (Onsite in Jurupa Valley, CA)
Demand Planner (Onsite in Jurupa Valley, CA)

Crane ChemPharma & Energy • Jurupa Valley (CA)

On-site
USD 36,000 - 44,000
comprehensive benefits
401K contribution and match
Paid Time Off
+2
NDT Inspector (Level II MT and PT)
NDT Inspector (Level II MT and PT)

211 Hydro-Aire Aerospace Corp. • Elyria (OH)

On-site
USD 40,000 - 57,000
Health, dental, vision
Education reimbursement
Benefits after 90 days
Quality Specialist – Mechanical Inspection (First Shift)
Quality Specialist – Mechanical Inspection (First Shift)

211 Hydro-Aire Aerospace Corp. • United States

On-site
USD 41,000 - 58,000
Health care
Dental insurance
Vision insurance
+6