Quality Control Technician

JM Eagle; Ashtabula (OH); On-site; USD 42,000 - 52,000; Full time

Job summary

Plastpro, Inc. is seeking a Quality Control Technician in Ashtabula, OH to oversee inspections during processing and finished stages. You will make routing decisions on acceptance using standard procedures and instruments, and ensure compliance with quality standards.

The role requires a high school diploma or GED, experience in quality inspection, and strong data-analysis and reporting capabilities. Ability to stand for long periods and work independently is essential.

Qualifications

• High school diploma or GED is required.
• Experience as an inspection or quality technician.
• Understanding of advanced mathematical concepts.
• High level of visual awareness.
• Advanced organizational skills.
• Experience drafting reports and collating data.
• Ability to work alone with minimal supervision.
• Ability to analyze and interpret technical information.
• Ability to stand for long periods.
• Experience with Word, Excel, and PowerPoint.

Responsibilities

• Perform line audits.
• Conduct 24 hour drop area inspections.
• Prepare written reports when necessary or as directed; read blue prints to verify specifications.
• Check quality of finished products for shipment and returns.
• Develop and maintain inspection reports.
• Inspect raw materials or products per quality and safety standards.
• Ensure materials and products comply with company standards.
• Ensure test equipment is calibrated and functioning.
• Report and record quality anomalies to supervisor.
• Compile test data and draft quality reports.
• Identify areas for improvement in quality control processes.

Skills

Inspection experience

Quality control

Mathematics

Attention to detail

Report drafting

Data analysis

Independent work

Technical interpretation

Stand long periods

MS Word/Excel/PowerPoint

Education

High school diploma or GED

Tools

Microsoft Word

Microsoft Excel

Microsoft PowerPoint

Job description

Job Details

Job Location: Ashtabula, OH 44004

Position reporting directly to this position: NONE

Position Objective

Has overall knowledge of Plastpro, Inc. products and accessories concerning specifications and methods of inspection.

Inspect all components of the doors while in process and finished stages. Makes routing decisions on acceptance of these products using standard procedures and instruments.

Quality Control Technician Requirements

• High school diploma or GED.
• Experience as an Inspection or quality technician.
• Understanding of advanced mathematical concepts.
• High-level of visual awareness.
• Advanced organizational skills.
• Experience drafting reports and collating data.
• Ability to work alone with minimal supervision.
• Ability to analyze and interpret technical information.
• Ability to stand for long periods.
• Experience with Microsoft Word, Excel, and PowerPoint

Quality Control Technician Responsibilities and Duties

A. Tasks and Duties

• Perform line audits.
• Conduct 24 hour drop area inspections.
• Prepares written reports when necessary or as directed. Checks special orders and reads blue prints to determine if specifications have been complied with.
• Checks the quality of finished products for shipment and returned goods for acceptance to stock.
• Developing and maintaining company inspection reports.
• Inspecting Raw material or product according to quality and safety standards.
• Ensuring all Raw materials and products comply with company standards.
• Ensuring test equipment is calibrated and working correctly.
• Reporting / recording quality anomalies to the supervisor.
• Collating test data and drafting quality reports.
• Identifying possible areas for improvement in quality control processes.
• Maintains good housekeeping at all times
• Ensuring production is not hindered by quality testing procedures.

B. Physical / Visual Activities Required

• Have adequate sight, hearing and use of limbs to safely operate all powered vehicles. I.E. Forklifts, sweepers, cars and pickups.
• Sight capabilities to distinguish proper products identification as well as warning indicators.
• Hearing capabilities to distinguish differences in warning alarm indicators and standard operation indicators.
• Sight capabilities to use tools required for quality control verification.
• Stooping, kneeling, crouching, crawling capabilities to handle job requirements for inspecting pipe.
• Balancing to maintain body equilibrium to prevent falling when walking, standing or crouching in all areas to inspect products and raw materials.
• Ability to verbally communicate either face to face or via telephone with other fellow employees to accomplish all assigned job requirements.
• Hear and understand all verbal communication whether it be face to face or via telephone.
• See and understand all written communication.
• Ability to confirm by sight quality level of raw materials and products produced to determine acceptance and or denial of each.
• Climb and descend all ladders or steps whether fixed or portable on company facilities in order to inspect doors and raw materials.
• Lift up to 50 pounds and carry up to 30 feet.
• Push and or pull up to 2500 pounds up to 30 feet with the aid of material handling equipment.
• Walking through, under and around equipment with a clearance of 30"
• Ability to grasp tools (manual as well as powered) and use them in accordance with a safe working manner so as not to injure yourself or fellow employees. I.E. power saws, drills, hammers, presses, latches etc.
• Sight capability to safely operate at arm's length machinery and power and 9r hand tools needed to accomplish the requirements of the job assignments for this position.

Authority/Decision Making:

• State closeness of supervision, control by policy or procedure, direction of others.
• Works within Plastpro, Inc. guidelines and policies of Plastpro, Inc.
• Follows guidelines and directives supplied by Q.C. Supervisor.

Qualifications

Position reporting directly to this position: NONE

Position Objective

Has overall knowledge of Plastpro, Inc. products and accessories concerning specifications and methods of inspection.

Inspect all components of the doors while in process and finished stages. Makes routing decisions on acceptance of these products using standard procedures and instruments.

Quality Control Technician Requirements

• High school diploma or GED.
• Experience as an Inspection or quality technician.
• Understanding of advanced mathematical concepts.
• High-level of visual awareness.
• Advanced organizational skills.
• Experience drafting reports and collating data.
• Ability to work alone with minimal supervision.
• Ability to analyze and interpret technical information.
• Ability to stand for long periods.
• Experience with Microsoft Word, Excel, and PowerPoint

Quality Control Technician Responsibilities and Duties

A. Tasks and Duties

• Perform line audits.
• Conduct 24 hour drop area inspections.
• Prepares written reports when necessary or as directed. Checks special orders and reads blue prints to determine if specifications have been complied with.
• Checks the quality of finished products for shipment and returned goods for acceptance to stock.
• Developing and maintaining company inspection reports.
• Inspecting Raw material or product according to quality and safety standards.
• Ensuring all Raw materials and products comply with company standards.
• Ensuring test equipment is calibrated and working correctly.
• Reporting / recording quality anomalies to the supervisor.
• Collating test data and drafting quality reports.
• Identifying possible areas for improvement in quality control processes.
• Maintains good housekeeping at all times
• Ensuring production is not hindered by quality testing procedures.

B. Physical / Visual Activities Required

• Have adequate sight, hearing and use of limbs to safely operate all powered vehicles. I.E. Forklifts, sweepers, cars and pickups.
• Sight capabilities to distinguish proper products identification as well as warning indicators.
• Hearing capabilities to distinguish differences in warning alarm indicators and standard operation indicators.
• Sight capabilities to use tools required for quality control verification.
• Stooping, kneeling, crouching, crawling capabilities to handle job requirements for inspecting pipe.
• Balancing to maintain body equilibrium to prevent falling when walking, standing or crouching in all areas to inspect products and raw materials.
• Ability to verbally communicate either face to face or via telephone with other fellow employees to accomplish all assigned job requirements.
• Hear and understand all verbal communication whether it be face to face or via telephone.
• See and understand all written communication.
• Ability to confirm by sight quality level of raw materials and products produced to determine acceptance and or denial of each.
• Climb and descend all ladders or steps whether fixed or portable on company facilities in order to inspect doors and raw materials.
• Lift up to 50 pounds and carry up to 30 feet.
• Push and or pull up to 2500 pounds up to 30 feet with the aid of material handling equipment.
• Walking through, under and around equipment with a clearance of 30"
• Ability to grasp tools (manual as well as powered) and use them in accordance with a safe working manner so as not to injure yourself or fellow employees. I.E. power saws, drills, hammers, presses, latches etc.
• Sight capability to safely operate at arm's length machinery and power and 9r hand tools needed to accomplish the requirements of the job assignments for this position.

Authority/Decision Making:

• State closeness of supervision, control by policy or procedure, direction of others.
• Works within Plastpro, Inc. guidelines and policies of Plastpro, Inc.
• Follows guidelines and directives supplied by Q.C. Supervisor.