Quality Control Engineer

Air Energy, Inc.

Chicago (IL)

On-site

USD 90,000 - 130,000

Full time

43 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Medical coverage
401(k) with company match
Disability coverage

Job summary

Air Energy, Inc. is seeking a Quality Control Engineer for our on-site Chicago lab and pilot line. You will ensure materials, in-process checks, and final cells meet specifications while scaling manufacturing.

You will establish inspection plans, SPC checkpoints, and traceability from raw materials to finished cells. The role emphasizes rigorous quality systems, CAPA investigations, calibration, and documentation to support aerospace/defense end markets.

Qualifications

  • Master’s degree in a relevant field
  • 1–5 years of industry experience in quality engineering, quality control, or a related manufacturing/lab-quality role
  • Working knowledge of SPC, root-cause analysis methods (5-why, fishbone), and CAPA processes
  • Comfortable working around controlled-atmosphere lab/production environments and reactive materials
  • Strong documentation habits and attention to detail

Responsibilities

  • Develop and execute incoming inspection plans for raw materials such as lithium foil, electrolyte precursors, catalysts, separators, and other cell components
  • Support qualification of new materials and cell components
  • Develop and own the quality control plan and work with other engineers to define specifications for materials and manufacturing processes
  • Lead SOP documentation for characterization equipment (SEM/EDS, XRD, XPS, Raman, FTIR, BET, etc)
  • Define and monitor in-process quality checkpoints across electrode/electrolyte fabrication and cell assembly; apply statistical process control to flag drift before it becomes scrap
  • Perform final cell inspection and acceptance testing; maintain traceability from raw material lot to finished cell
  • Lead non-conformance investigations and CAPA, including root-cause analysis with process and R&D engineering
  • Establish and maintain calibration schedules for test and measurement equipment
  • Build out quality documentation and management-system practices (ISO 9001)
  • Bring statistical rigor (measurement system analysis, control charts, cell-to-cell variability)
  • Manage chemical inventory, safety data sheets, hazardous waste, inspections, and incident investigations
  • Support lab safety programs: chemical hygiene, hazard assessments, training
  • Support safety and performance testing relevant to aviation/defense end markets as those requirements come into scope

Skills

SPC
Root-cause analysis
CAPA
Documentation

Education

Master’s degree
PhD (preferred)

Tools

SEM/EDS
XRD
XPS
Raman
FTIR
BET

Job description

Position & Location: Full-time, Chicago, IL (on-site lab and pilot-line presence)

Classification: Salary exempt

Reports to: Principal Technology Development Engineer

About Air Energy, Inc.

Air Energy is an energy storage platform company developing solid-state lithium-air batteries to deliver transformational improvements in energy density, safety, and mission capability for aerial and autonomous platforms and back-up AI power resilience systems.

We were founded on a simple conviction: the limits of electric flight, autonomy, and resilient power aren't set by physics — they're set by batteries. Lithium-ion technology is nearing its ceiling, and incremental gains can no longer unlock the step-change performance required for long-range drones, electric aviation, and mission-critical power systems operating far from the grid. Air Energy exists to break through that ceiling.

Born from a breakthrough in solid-state lithium-air science, we're pioneering a new class of batteries designed to deliver nearly 4x the energy density of today's best lithium-ion cells, while improving safety, sustainability, and system-level resilience. By eliminating the need to carry oxygen internally, our architecture dramatically reduces inactive mass — enabling lighter platforms, longer endurance, and entirely new mission profiles. This is a platform shift: it will unlock capabilities such as multi-day autonomous maritime surveillance, long-range cargo drones, persistent aerial communications, electric regional aviation, and resilient backup power for critical infrastructure and AI data centers.

We are execution-driven, moving from validated science to real-world cells, pilot manufacturing, and full-system integration in partnership with government and commercial leaders. Air Energy is a Public Benefit Corporation because our mission goes beyond performance metrics and financial returns — we're building foundational energy technology to catalyze energy resilience and independence at scale. For more information, visit airenergy.io.

Quality Control Engineer

The Quality Control Engineer will be the backbone that ensures product meets defined specifications from incoming raw materials to in-process checks and final cell inspection. You will be responsible for maintaining product quality as manufacturing scales.

Purpose of the Role

The Quality Control Engineer will be the backbone that ensures product meets defined specifications from incoming raw materials to in-process checks and final cell inspection. You will be responsible for maintaining product quality as manufacturing scales.

Core Responsibilities
  • Develop and execute incoming inspection plans for raw materials such as lithium foil, electrolyte precursors, catalysts, separators, and other cell components
  • Support qualification of new materials and cell components
  • Develop and own the quality control plan and work with other engineers to define specifications for materials and manufacturing processes
  • Lead SOP documentation for characterization equipment (SEM/EDS, XRD, XPS, Raman, FTIR, BET, etc)
  • Define and monitor in-process quality checkpoints across electrode/electrolyte fabrication and cell assembly; apply statistical process control to flag drift before it becomes scrap
  • Perform final cell inspection and acceptance testing; maintain traceability from raw material lot to finished cell
  • Lead non-conformance investigations and corrective/preventive action (CAPA), including root-cause analysis with process and R&D engineering
  • Establish and maintain calibration schedules for test and measurement equipment
  • Build out quality documentation and management-system practices (aligned to ISO 9001 principles) appropriate to a scaling startup
  • Bring statistical rigor (measurement system analysis, control charts, cell-to-cell variability) so the team can separate real effects from noise.
  • Manage chemical inventory, safety data sheets, hazardous waste, inspections, and incident investigations
  • Support lab safety programs: chemical hygiene, hazard assessments, training
  • Support safety and performance testing relevant to aviation/defense end markets as those requirements come into scope

NOTE: This position may require access to information or technology controlled under the ITAR/EAR; applicants must qualify as a U.S. Person under 22 CFR 120.15 or be eligible for the appropriate government license or exemption prior to starting.

Key Deliverables / Outcomes
  • Incoming inspection plans fully documented and implemented for every active raw material type, with no undetected out-of-spec lots reaching production
  • In-process SPC checkpoints established and actively monitored, with process drift identified and addressed before it results in scrap
  • Zero critical non-conformances escaping to shipped cells; all final inspection and acceptance testing completed and documented on schedule
  • Complete, unbroken lot-to-cell traceability maintained across all production runs
  • CAPA investigations closed within target cycle time, with root-cause analysis and corrective actions verified as effective
  • 100% of test and measurement equipment maintained on calibration schedule, audit-ready at all times
  • Quality management system documentation (aligned to ISO 9001 principles) built out and kept current as manufacturing scales
  • Measurable reduction in scrap and yield loss attributable to quality escapes over time
Qualifications
Required Qualifications
  • Master’s degree in a relevant field
  • 1–5 years of industry experience in quality engineering, quality control, or a related manufacturing/lab-quality role
  • Working knowledge of SPC, root-cause analysis methods (5-why, fishbone), and CAPA processes
  • Comfortable working around controlled-atmosphere lab/production environments and reactive materials
  • Strong documentation habits and attention to detail
Preferred Qualifications
  • PhD in a relevant field
  • Hands-on experience with the following: SEM/EDS, XRD, XPS, Raman, FTIR, BET
  • Experience with battery-specific quality/safety standards (e.g., UN 38.3, IEC 62133)
  • ASQ Certified Quality Engineer, Six Sigma Green or Black Belt, or ISO 9001 / AS9100 internal auditor training
Core Competencies and Attributes
  • Rigorous, detail-oriented approach to specification, inspection, and lot-to-cell traceability.
  • Fluent in SPC, CAPA, and structured root-cause methodologies (5-why, fishbone).
  • Quality-management-system mindset aligned to ISO 9001 principles.
  • Proactive at detecting process drift before it becomes scrap.
  • Clear communicator across process, R&D, and quality functions.
Physical Requirements
  • Regularly required to stand and walk between inspection stations, lab benches, and pilot-line areas
  • Regularly required to use hands and fingers with precision (manual dexterity) to operate measurement, calibration, and inspection equipment
  • Close visual acuity for inspecting incoming materials, in-process components, and finished cells for defects, and for reading test/measurement instrumentation
  • Ability to work around controlled-atmosphere lab and production environments for portions of the workday, including wearing required personal protective equipment (PPE) such as gloves, safety glasses, and lab coats
  • Occasionally required to lift and/or move up to 25 lbs (e.g., sample lots, equipment, documentation binders)
Compensation

The target base salary range for this position is $90,000–$130,000, with placement within the range based on experience, qualifications, and level at hire. Compensation may also include equity participation and performance-based incentives, in addition to the benefits summarized below.

Benefits
  • Medical coverage through UnitedHealthcare (Choice Plus PPO), with Air Energy contributing toward the premium cost; includes no-cost preventive care and no-cost telemedicine (virtual) visits
  • Company paid dental, vision through MetLife (PDP Plus dental and VSP Choice vision networks), basic life and AD&D insurance, and short-term and long-term disability coverage for income protection
  • 401(k) retirement plan with company match
  • Voluntary supplemental insurance options, including accident, critical illness coverage and voluntary life/AD&D
Equal Opportunity Employer

Air Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Research and Development Engineer
Research and Development Engineer

Air Energy, Inc. • Chicago (IL)

On-site
USD 110,000 - 130,000
Medical coverage
Dental & Vision
401(k) plan
+1
Process Engineer
Process Engineer

Air Energy, Inc. • Chicago (IL)

On-site
USD 90,000 - 130,000
Medical coverage
Dental & Vision
Retirement plan 401(k)
+1
Quality Control Technician
Quality Control Technician

Advanced Energy • Redwood City (CA)

On-site
USD 33,000 - 43,000
Medical plans
Disability & life insurance
Health Savings Account
+6
Quality Control Engineer
Quality Control Engineer

American Society for Quality • Vista (CA)

On-site
USD 73,000 - 90,000
Quality Control Engineer
Quality Control Engineer

American Lithium Energy (ALE) • San Diego (CA)

On-site
USD 73,000 - 90,000
Quality Engineer
Quality Engineer

EnerSys • Longmont (CO)

On-site
USD 76,000 - 96,000
Senior Associate Engineer, Process Quality
Senior Associate Engineer, Process Quality

Blue Current, Inc. • Hayward (CA)

On-site
USD 95,000 - 127,000
Battery Test Engineer
Battery Test Engineer

Pivotal • Palo Alto (CA)

On-site
USD 130,000 - 190,000
Senior Quality Manager
Senior Quality Manager

Amprius • Iowa

On-site
USD 150,000 - 190,000
Medical, dental and vision benefits
Health Reimbursement Account (HRA)
HSA-compatible Medical Plan
+5
Quality Control Supervisor
Quality Control Supervisor

Form Energy • Weirton (WV)

On-site
USD 70,000 - 90,000
Stock options
100% medical, dental, and vision premiums for full-time employees
At least 12 weeks of paid leave for new parents