Quality/CMM Inspector - Swing or Weekend Shift

RTC Aerospace LLC; Fife (WA); On-site; USD 34,440 - 61,992; Full time

Benefits offered by this job

Medical insurance

Dental insurance

401(k)

Job summary

RTCA is seeking a Quality Inspector in Fife, WA to inspect raw materials, in‑process parts, and finished components against drawings and AS9100/ISO standards. You will document findings, support FAI and AS9102, and work with cross‑functional teams to drive quality improvements.

You will use precision tools (micrometers, calipers, bore gauges, height gauges) and interpret GD&T. This is a full‑time, onsite role with potential for swing/weekend shifts and a compensation range of $25–$45 per hour.

Qualifications

• Experience in quality inspection within aerospace, precision machining, or manufacturing environments.
• Reading and interpreting engineering drawings, blueprints, specifications, and technical documentation.
• Familiarity with AS9100 and/or ISO 9001 quality management systems.
• Knowledge of GD&T (ASME Y14.5).
• Proficiency with standard inspection equipment (micrometers, calipers, bore gauges, height gauges).
• Ability to complete inspection and quality documentation accurately.
• Strong attention to detail and communication skills.

Responsibilities

• Perform dimensional and visual inspections on raw materials, in-process parts, assemblies, and finished components.
• Interpret engineering drawings and specifications per ASME Y14.5 GD&T requirements.
• Verify conformance to customer, regulatory, and internal quality requirements including AS9100/ISO standards.
• Maintain inspection records, traceability, and quality documentation.
• Support First Article Inspection (FAI) and AS9102 documentation.
• Identify nonconformities and collaborate on containment and corrective actions.
• Participate in root cause analysis and continuous improvement initiatives.

Skills

Quality inspection

AS9100 / ISO 9001

GD&T

ASME Y14.5

Dimensional measurement

Documentation

Cross-functional teamwork

MS Office

ERP/MRP familiarity

Education

ASQ Certification

Tools

Calypso

Mitutoyo MCOSMOS

Verisurf

CMM software

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Full Time - Employee Technical Fife, Fife, WA, US

5 days ago Requisition ID: 1409

Salary Range: $25.00 To $45.00 Hourly

About RTCA:

RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals.

Unlike large organizations where roles can be narrow, RTCA offers hands‑on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer.

At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission!

How You’ll Make an Impact:

The Quality Inspector is responsible for performing inspections of raw materials, in-process components, and finished products to ensure compliance with engineering drawings, customer specifications, and quality standards within a precision manufacturing environment. This role supports production and quality objectives through accurate inspection, documentation, problem‑solving, and collaboration with cross‑functional teams. Depending on experience and level, the Quality Inspector may support or lead advanced inspection activities, quality investigations, continuous improvement initiatives, and mentoring of junior personnel.

What you’ll be doing as a Quality Inspector:

• Working a full‑time, onsite position at our Fife, WA location. Swing or Weekend Shift.
• Perform dimensional and visual inspections on raw materials, in‑process parts, assemblies, and finished components using precision measurement tools and standard inspection techniques.
• Interpret engineering drawings, blueprints, models, specifications, manufacturing plans, and work instructions in accordance with ASME Y14.5 GD&T requirements.
• Verify product conformity to customer, regulatory, and internal quality requirements including AS9100 and ISO standards.
• Utilize inspection equipment including micrometers, calipers, bore gauges, height gauges, surface plates, optical comparators, and other precision instruments.
• Verify calibration status and proper handling of inspection tools and equipment.
• Complete and maintain accurate inspection records, traceability documentation, range forms, FAIRs, and other quality documentation as required.
• Support or perform First Article Inspection (FAI) activities and AS9102 documentation.
• Identify, document, and communicate nonconforming conditions while collaborating with Production, Engineering, and Quality teams on containment and resolution activities.
• Participate in root cause analysis, corrective actions, preventive actions, and continuous improvement initiatives.
• Maintain inspection staging areas, documentation control, and part traceability throughout the inspection process.
• Communicate inspection findings, production status, and quality concerns clearly and professionally to internal teams and customers as needed.
• Support audits, customer visits, and quality system compliance activities when assigned.
• Train, mentor, or provide technical guidance to other inspectors based on experience and level.
• Adhere to all company safety policies and maintain a clean, organized work environment.
• Performs other duties as assigned.

Required Qualifications (Education, skills and experience):

• Experience in quality inspection within aerospace, precision machining, or manufacturing environments.
• Ability to read and interpret engineering drawings, blueprints, specifications, and technical documentation.
• Working knowledge of AS9100 and/or ISO 9001 quality management systems.
• Familiarity with ASME Y14.5 geometric dimensioning and tolerancing (GD&T).
• Proficiency using standard inspection equipment including micrometers, calipers, bore gauges, height gauges, and related precision tools.
• Understanding of inspection methods, measurement techniques, and basic shop math/trigonometry.
• Ability to accurately complete inspection and quality documentation.
• Strong attention to detail, organizational skills, and problem‑solving abilities.
• Effective verbal and written communication skills with the ability to work independently and within cross‑functional teams.
• Proficiency with Microsoft Office and familiarity with ERP/MRP systems.

Preferred Qualifications (Education, skills and experience):

• Experience with First Article Inspection Reports (FAIRs) and AS9102 documentation.
• Experience with Coordinate Measuring Machines (CMM) and related software such as Calypso, Mitutoyo MCOSMOS, Verisurf, or similar systems.
• Knowledge of advanced inspection methods, statistical process control (SPC), Lean manufacturing, or Six Sigma methodologies.
• Experience supporting audits, corrective action investigations, or continuous improvement initiatives.
• Technical certification, ASQ certification, or post‑secondary education in Quality, Manufacturing, Engineering, or a related field.
• Experience mentoring or training team members in inspection techniques and quality processes.

Compensation and Benefits:

• Medical, dental, and vision insurance coverage.
• Choice of medical plan options, including a no‑cost employee‑only coverage plan
• HSA‑eligible health plan with employer contributions
• Basic and supplemental life insurance
• Long‑term disability coverage
• 401(k) plan with up to a 6% QACA company match
• Paid time off including vacation, sick time, and nine (9) paid company holidays
• Shift differentials for applicable off‑shifts
• Discretionary bonus programs based on position and company performance

The Quality Inspector Compensation range for onsite Washington applicants is $25-45 commensurate with experience. Some shifts may include shift differential pay rates. Other site ranges may differ.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.

RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including sexual orientation and gender identity), national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Applicants wishing to receive information on RTCA’s Aff…

Candidates will receive consideration without discrimination in accordance with Article 9, Chapter XVIII of the City of Los Angeles Municipal Code and applicable federal, state, and local laws.

Powered by