Quality Assurance Inspector II

Click Bond, Inc.; Watertown (CT); Presencial; USD 55 000 - 75 000; Tempo integral

Resumo da oferta

Click Bond Watertown, CT is seeking a qualified quality inspector to inspect and measure parts, ensuring compliance with AS9100/ISO standards and customer drawings. You will use micrometers, calipers, optical devices, and the Retina inspection system to verify conformance and document results.

Responsibilities include generating inspection reports, certificates of conformity, NCR handling, training, and supporting root-cause analysis with 5-Why/8D, along with safe, accurate data entry in the

Qualificações

• Holds knowledge of SPC and basic statistical methods.
• Experience with AS9102 First Article Inspections (FAI).
• Understanding of GD&T, and GD&T certification preferred.
• Clear and confident communication; able to read engineering drawings and procedures.
• Audit training or equivalent experience preferred; knowledge of NCR processes.

Responsabilidades

• Use inspection devices to verify conformance with drawings and specs.
• Set up and operate Retina automated inspection system.
• Produce inspection reports and certificates of compliance.
• Stamp approvals for procured or internal products and related shipping docs.
• Create inspection and control plans; participate in training.
• Perform In Process, First Article, Final, and Shipping inspections.
• Coordinate with internal customers and support root-cause analysis.

Conhecimentos

AS9100/ISO knowledge

GD&T understanding

SPC (Statistical Process Control)

AS9102 FAI

Quality documentation

Reading engineering drawings

MS Word, Excel, Outlook

ERP/MRP software

Attention to detail

Formação académica

High School Diploma or GED

GD&T certification

ASQ CQI Certification (preferred)

Niton Analyzer certification (preferred)

Ferramentas

Retina automated inspection system

Micrometer

Caliper

XRF/Niton analyzer

ERP/MRP inventory software

MS Word, Excel

Quality inspection devices

Descrição da oferta de emprego

Job Details: Job Location: Click Bond Watertown - Watertown, CT 06795, Inspects and measures internally manufactured parts or procured products using various measurement equipment to verify compliance with Click Bond and/or customer furnished engineering drawings and procedures. Ensure quality production of products consistent with established standards and specifications including, but not limited to, AS9100 / ISO 9001/ ISO14001. Completes inspection records, Physical and Chemical certifications, performs AS9102 FAI’s, and non‑conformance documentation. Makes entries in Click Bond ERP/MRP system. Verifies all documentation is complete and without errors prior to parts being shipped to external customers. Interacts with both internal and external customers in a polite courteous manner. Trains new employees, level1 employees and other personnel as needed. Assists in discovering root causes and helps develop corrective action to prevent reoccurrence.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Use inspection devices (micrometer, caliper, optical measurement equipment) to determine product conformance with engineering drawings, purchase orders and associated specifications.
• Setup and operation of Retina automated inspection system.
• Produce reports of inspection acceptance or non‑conformance and make appropriate computer entries.
• Stamp mark of approval for procured product, internally produced product, or appropriate shipping documentation.
• Produce reports of traceability and certificates of compliance.
• Test materials as necessary
• Assists with the creation of inspection plans and inspection report forms.
• Assist in training new employees and level 1 inspectors.
• Help in the creation on control plans and inspection plans.
• Create AS9102 FAI’s
• Communicate and work with internal customers.
• Occasional use of the forklift
• Developing root cause analysis and corrective actions using 5‑Why and/or 8D
• Perform First shot, In Process, Final and Shipping inspections.
• Coordinates, trains, and audits production technicians in the Certified Manufacturing Inspector program compliant with AS9162 Aerospace Operator Self‑Verification Programs.
• XRF material analysis
• Proficient in the management of product in the non‑conformance process.
• Report immediately all suspicious and hazardous conditions to a supervisor.
• Understand and observe all safety guidelines and assure quality and safety by complying with all appropriate CB policies and procedures.
• Assist in maintaining clean, orderly, and hazard‑free work areas.
• Able to work with minimal supervision, be a self‑starter and be detail oriented.
• Other duties as assigned.

Qualifications:

• Has knowledge of SPC (Statistical Process Control) and basic statistical methods
• Experience with AS9102 FAI (First Article Inspection)
• Understanding of GD&T (Geometric Dimensioning and Tolerance), Certification required
• Speaks clearly and confidently in all situations; listens and gets clarification; responds well to questions.
• Writes clearly and informatively; edits work for spelling and grammar; presents numerical data effectively.
• Able to read and interpret engineering drawings including, procedures and written information.
• Exhibits sound and accurate judgment and includes appropriate people in decision‑making process.
• Consistently at work and on time.
• Follows; keeps commitments.
• Completes tasks on time or notifies appropriate person of an alternate plan.
• Written and verbal instructions, responds to management direction; takes responsibility for own actions.
• Ability to read and interpret documents such as aerospace procedures, engineering requirements, safety rules, and quality assurance manual.
• Ability to write routine reports and correspondence.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• To perform this job successfully, an individual should have basic computer navigation skills as well as experience with MS Word, Excel, Outlook, ERP/MRP inventory software and manufacturing software.
• Experience with 6‑Sigma and Lean Manufacturing principles
• Experience with the NCR process and non‑conformances
• Excellent analytical, critical thinking, problem solving and organizational skills.
• Read and understand control plans and inspection plans.
• Excellent communication skills with a customer focused mindset.
• Proficient at performing In Process Inspections, Final Inspections, and dimensional inspections and other attributes utilizing inspection devices (such as micrometer, caliper, optical measurement equipment, etc.)
• Forklift experience and/or certification preferred.
• Knowledge of manufacturing processes including but not limited to F‑Nams, Injection Molding, Compression Molding, CNC’s, Composites, paint processes, passivation and Assembly depending on the area assigned.
• Ability to write and read English.

EDUCATION AND EXPERIENCE:

• 2 years of experience in quality inspection or related position required.
• 3 years of experience in a manufacturing environment
• High School Diploma or General Education Diploma (G.E.D.) required.
• Has been through audit training or 1-year equivalent audit experience.
• 1 year experience reading GD&T drawings or GD&T certification required.
• Certifications from professional organizations (i.e., ASQ CQI (Certified Quality Inspector)) are preferred.
• Niton Analyzer certification preferred.
• Experience with 6‑Sigma and Lean Manufacturing principles
• Experience with the NCR process and non‑conformances

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Regularly required to use hands and finger, to handle or feel product for burrs or surface finish.
• Frequently required to stand; reach with hands and arms.
• Occasionally required to walk; sit and stoop, bend, kneel or crouch.
• Frequently required to lift and/or move up to 35 pounds, occasionally lift and/or move up to 50 pounds.
• Close vision, color vision and ability to adjust focus, occasional microscope work is required.

CLICK BOND WAY – KEY ATTRIBUTES:

• Communicates respectfully to all team members, vendors, and visitors.
• Models a positive attitude.
• Actively listens to others and supports the team environment.
• Asks questions and learns from mistakes.
• Executes tasks with minimal errors in a timely and efficient manner.
• Attendance is consistent and meets or exceeds company standards.

Click Bond is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information or any other protected classification.

Click Bond complies with federal and state disability laws. Click Bond will provide reasonable accommodation when requested by a qualified applicant or employee with a disability unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contactPeople Operations at 775.885.8000 or email: [e-mail]