Quality Assurance Inspector 2 NDI 1

Cirrus; Duluth (MN); On-site; USD 29,000 - 43,000; Full time

Benefits offered by this job

Comprehensive Health Coverage: Medical

Employer-Paid Coverages: Group term, L

Flexible Spending Accounts: FSA and HS

Well-being programs and EAP

401(k) Plan: Matches up to 5% after 90

Job summary

Cirrus in Duluth, MN is seeking a senior quality professional to ensure aerospace components meet regulatory and customer requirements through advanced quality control, NDT, audits, and continuous improvement. You will lead root-cause analysis, document non-conformances, and drive action to reduce defects and improve first-pass yield.

You will mentor inspectors and collaborate with manufacturing, engineering, and management to strengthen quality systems, compliance, and cost performance while

Qualifications

• AAS or higher in NDT, QA, or related field.
• Minimum two years aerospace quality assurance, quality control, or inspection experience preferred.
• ASNT UT/VT/ST certifications or CQI are a plus.
• Knowledge of AS9100, NADCAP, FAA regulations.
• Ability to read engineering drawings and technical documentation.
• Knowledge of quality management systems and tools.
• Strong leadership and problem-solving skills.
• Experience with continuous improvement initiatives.

Responsibilities

• Read, interpret, and inspect to engineering drawings, procedures, specifications, and manufacturing requirements.
• Perform nondestructive testing activities, equipment calibration verification, and inspection activities per approved technical references.
• Interpret and evaluate NDT results and determine product acceptance or rejection.
• Maintain detailed inspection records, non-conformance reports, and corrective action documentation.
• Communicate findings and quality concerns to manufacturing, engineering, and management teams.
• Conduct audits of manufacturing processes, equipment, and quality systems.
• Identify, document, and report non-conformances and support root cause and corrective action activities.
• Participate as a member of MRB, corrective action, and change management activities.
• Assist management in assigning First Article and audit activities.
• Apply quality control methods to monitor process capability, verify product conformity, identify recurring defect trends, and recommend corrective actions that improve yield and reduce rework.
• Use data-driven quality tools, including root cause analysis, defect tracking, audit findings, and inspection history, to drive measurable improvements in safety, quality, delivery, cost, and customer satisfaction.
• Actively participate in continuous improvement initiatives to enhance quality, manufacturing processes, productivity, and safety.
• Operate independently and objectively while supporting process improvement, standardization, and change management efforts.
• Coach and support manufacturing personnel in defining and implementing continuous improvement actions.
• Identify and champion cross-functional continuous improvement projects spanning multiple departments.
• Provide leadership in structured problem-solving efforts to improve safety, quality, delivery, productivity, and cost performance.
• Serve as a senior quality resource by mentoring inspectors and production personnel, supporting decision-making on complex quality issues, and escalating risks with clear technical justification.
• Demonstrate leadership qualities and act as a quality resource for manufacturing teams.
• Ensure compliance with work instructions, quality procedures, regulatory requirements, and 6S principles.
• Document quality improvements, cost avoidance, defect reduction, and process efficiency gains to demonstrate the business value of the role and support appropriate compensation alignment.
• Maintain clean and orderly work areas and use required PPE.
• Perform other duties as assigned.

Skills

NDT inspections

Quality control

Root cause analysis

Continuous improvement

Auditing

Leadership

Documentation

Cross-functional collaboration

Education

AAS in Non-Destructive Testing, Quality Assurance, or related field

Job description

Overview

Responsible for ensuring aerospace components, assemblies, and systems meet quality, regulatory, customer, and business performance requirements through advanced quality control, non-destructive testing, auditing, corrective action leadership, and continuous improvement execution. This role performs and interprets NDT inspections, evaluates product conformity, maintains complete quality records, identifies systemic quality risks, and leads process improvement initiatives that reduce defects, improve first-pass yield, support cost avoidance, and strengthen manufacturing performance across cross-functional teams.

Overview

Responsible for ensuring aerospace components, assemblies, and systems meet quality, regulatory, customer, and business performance requirements through advanced quality control, non-destructive testing, auditing, corrective action leadership, and continuous improvement execution. This role performs and interprets NDT inspections, evaluates product conformity, maintains complete quality records, identifies systemic quality risks, and leads process improvement initiatives that reduce defects, improve first-pass yield, support cost avoidance, and strengthen manufacturing performance across cross-functional teams.

Responsibilities

• Read, interpret, and inspect to engineering drawings, procedures, specifications, and manufacturing requirements.
• Perform nondestructive testing activities, equipment calibration verification, and inspection activities per approved technical references.
• Interpret and evaluate NDT results and determine product acceptance or rejection.
• Maintain detailed inspection records, non-conformance reports, and corrective action documentation.
• Communicate findings and quality concerns to manufacturing, engineering, and management teams.
• Conduct audits of manufacturing processes, equipment, and quality systems.
• Identify, document, and report non-conformances and support root cause and corrective action activities.
• Participate as a member of MRB, corrective action, and change management activities.
• Assist management in assigning First Article and audit activities.
• Apply quality control methods to monitor process capability, verify product conformity, identify recurring defect trends, and recommend corrective actions that improve yield and reduce rework.
• Use data-driven quality tools, including root cause analysis, defect tracking, audit findings, and inspection history, to drive measurable improvements in safety, quality, delivery, cost, and customer satisfaction.
• Actively participate in continuous improvement initiatives to enhance quality, manufacturing processes, productivity, and safety.
• Operate independently and objectively while supporting process improvement, standardization, and change management efforts.
• Coach and support manufacturing personnel in defining and implementing continuous improvement actions.
• Identify and champion cross-functional continuous improvement projects spanning multiple departments.
• Provide leadership in structured problem-solving efforts to improve safety, quality, delivery, productivity, and cost performance.
• Serve as a senior quality resource by mentoring inspectors and production personnel, supporting decision-making on complex quality issues, and escalating risks with clear technical justification.
• Demonstrate leadership qualities and act as a quality resource for manufacturing teams.
• Ensure compliance with work instructions, quality procedures, regulatory requirements, and 6S principles.
• Document quality improvements, cost avoidance, defect reduction, and process efficiency gains to demonstrate the business value of the role and support appropriate compensation alignment.
• Maintain clean and orderly work areas and use required PPE.
• Perform other duties as assigned.

Qualifications

• AAS in Non-Destructive Testing, Quality Assurance, or related field preferred.
• Minimum two years of aerospace quality assurance, quality control, or inspection experience preferred.
• Certifications such as ASNT UT/VT/ST, CQI, or equivalent are a plus.
• Knowledge of AS9100, NADCAP, FAA regulations, and aerospace manufacturing processes.
• Ability to read and interpret engineering drawings and technical documentation.
• Knowledge of quality management systems, inspection methods, and quality tools.
• Demonstrated ability to use quality control metrics, inspection data, and continuous improvement tools to reduce defects, improve first-pass yield, and support measurable operational results.
• Strong leadership, facilitation, coaching, and problem-solving skills.
• Experience leading or participating in continuous improvement and change management initiatives preferred.
• Ability to influence cross-functional teams, prioritize high-impact quality risks, and communicate business value associated with quality control and process improvement outcomes.
• Effective written and verbal communication skills and sound judgment.

Our Benefits

Cirrus provides a range of exciting benefits, including:

• Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options
• Employer-Paid Coverages: Group term life, short- and long-term disability insurance
• Flexible Spending Accounts: FSA and HSA offerings with company contributions to HSA
• Well-being: Calm Health, Employee Assistance Program, and wellness incentives through medical provider
• 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting at 1 year of service
• PTO: Various PTO plans starting at 100 hours accrued within the first year
• Additional Time off Benefits: Paid holidays, 2 weeks of Paid Parental leave, paid time for funeral leave and jury duty
• Career Development: Tuition reimbursement program and professional growth opportunities
• Exclusive Discounts: Cirrus Store, partner and marketplace discounts available
• Community & Engagement: Company and employee clubs at various locations

These benefits are designed to support your well-being, growth, and enjoyment at Cirrus!

Pay Range

Salary Range: USD $20.86/Hr. - USD $31.28/Hr.