QC Inspector

James Fisher Technologies LLC; Loveland (CO); On-site; USD 52,000 - 80,000; Full time

Job summary

James Fisher Technologies LLC in Loveland, Colorado is seeking experienced QC Inspectors to ensure compliance with ISO 9001:2015, ASME, NQA-1 and 10CFR50 Appendix B requirements. The role involves verifying documentation, inspecting parts, and releasing products to production, with occasional vendor visits.

This position supports a 9/80 schedule and a collaborative team environment, working in fabrication and office settings, with safety as a priority and opportunities to contribute to

Qualifications

• Minimum ISO 9001:2015 related QA experience.
• ASME, NQA-1 and/or 10CFR50 Appendix B familiarity is a plus.
• Knowledge of Geometric Dimensioning & Tolerancing (GD&T).
• Ability to read and understand drawings, procedures, and material codes.
• Experience generating quality inspection reports.
• Ability to read and interpret technical drawings and specs.

Responsibilities

• Gather required certifications and documents for ISO 9001:2015, ASME, NQA-1 and 10CFR50 Appendix B programs.
• Review and approve quality paperwork.
• Perform daily quality inspection tasks from receipt to final testing and acceptance.
• Measure machined components against drawings and specifications.
• Inspect vendor components for conformance to drawings, schematics and specs.
• Create and maintain inspection records across electronic systems.
• Report defects promptly using standard frameworks.
• Verify compliance to hydrostatic/pneumatic testing when applicable.
• Assist with internal audits and continuous improvement efforts.
• Maintain equipment calibration and safety practices.

Skills

Mechanical inspection

CMM programming

Reading drawings

GD&T

ASME/NQA-1 knowledge

Quality audits

Non-conformity reporting

NDT knowledge

Document control

Safety compliance

Tools

CMM machine

Job description

Description

About Us:

James Fisher Technologies (JFT) is a leading provider of remote solutions, specialty engineering, and technical services for hazardous environments. JFT operates at the forefront of the clean-energy transition, supporting OEMs and research partners advancing next-generation nuclear technology. Everyone at JFT has the chance to forge their career in an environment that values initiative, persistence, respect, curiosity, and passion.

At JFT, we believe in true work-life balance, and our 9/80 schedule lets you work Monday–Friday with every other Friday off to recharge.

We are growing and looking for experienced QC Inspectors to join our team. The anticipated closing date for this position is 10/05/2026 and applications will be reviewed on a rolling basis.

FUNCTION: The QC Inspector will utilize their inspection experience to ensure the products coming from external and internal vendors are compliant with the technical requirements specified. This position is responsible for verifying requirements from purchase orders are satisfied, all needed and substantiating documentation is created and recorded, and all parts are released to continue down through production.

REPORTING TO: Director of Quality

TYPICAL WORKING CONDITIONS: The QC Inspector will work in a fabrication shop environment as well as an office environment. The fabrication shop may involve exposure to heavy machinery, welding operations, and metal or plastic fabrication processes. The role requires strict adherence to safety protocols, including the use of personal protective equipment (PPE). Occasional travel may be required to vendor locations to perform inspections or audits.

DUTIES & RESPONSIBILITIES:

• Gather needed certifications and documents required for our ISO 9001:2015, ASME, NQA-1 and 10CFR50 Appendix B quality programs.
• Review and approve quality paperwork.
• Perform day-to-day quality inspection functions from initial material receipt inspections, commercial grade dedication, and in-process inspections all the way to final testing and acceptance of manufactured parts utilizing calibrated hand tools.
• Measure precision machined components and fabrications coming from our internal and external machine and fabrication shop against drawing requirements.
• Measure and inspect components coming from our vendors for conformance to engineering drawings, schematics, and specifications; process standards and specifications; and production or process plans.
• Visually and dimensionally inspecting parts and components in accordance with internal procedures, customer requirements, drawings, applicable codes, and standards
• Create and maintain inspection records utilizing many different electronic information systems.
• Fast, accurate reporting of defects or non-conformities using the JFT standard frameworks.
• Accept or reject material and identify and document anomalies and non-conformances.
• Ability to read and follow written instructions, processes, technical drawings, etc
• Maintain a regular and predictable work schedule.
• Perform other job-related duties as necessary.
• Overseeing and/or verifying compliance to hydrostatic/pneumatic testing
• Liquid Penetrant Testing, when required
• Assisting with ongoing Continuous Improvement efforts
• Assisting with Internal Audit / Monitoring Performance teams, if needed
• Successfully performing inspections/verifications for internal and external audits as needed
• Working as part of a collaborative team, helping other inspectors with inspections as needed, and asking for help when you need it!
• Supporting in the cross-training of other inspectors from time to time, to help build and facilitate stronger a more diverse inspection department
• Ensure the accuracy of your equipment through proper usage and regular calibration.
• Observe all safety, quality, attendance, and company policies/procedures

Requirements

PHYSICAL REQUIREMENTS:

• Must be able to stand for long periods, walk throughout the shop floor, and move between different workstations.
• Frequent bending, kneeling, and crouching may be required to inspect different components or areas.
• May involve lifting and carrying objects, typically up to 50 pounds as well as the ability to use hand tools and inspection equipment that may require physical strength.
• Manual dexterity is essential for handling small parts, tools, and precision instruments.
• Vision, including color perception, depth perception, and the ability to focus on small details is required.
• The ability to hear instructions, alarms, or equipment sounds that indicate potential issues.
• Requires sustained concentration to ensure detailed inspections and accurate measurements.
• Must be able to work on a computer and use standard office equipment.
• Must be able to communicate effectively in writing and verbally with team members, customers and vendors.

QUALIFICATIONS & EXPERIENCE:

• Previous experience with mechanical inspection, programming digital coordinate measurement machines (CMM), measurement using hand inspection tools and troubleshooting sources of error is critical to the position is a plus.
• Minimum of 3 years of experience working within an ISO 9001 quality management system.
• QA experience in the application of ASME, NQA-1 and/or 10CFR50 Appendix B is a plus.
• Extremely detail-oriented.
• Knowledge of Geometric Dimensioning & Tolerancing.
• Knowledge and Ability to read and understand drawings, procedures, and applicable material codes as necessary.
• Ability to demonstrate a solid understanding of hands-on measuring and testing equipment utilized for quality control inspections of precision machined components.
• Experienced in generating quality inspection reports.
• Clear and concise communication style.
• NDT experience including magnetic particle, liquid penetrant or leak testing (MT, PT, LT) is desired.
• ASNT qualifications are a plus.
• American Welding Society Certified Weld Inspector (AWS CWI) is a plus.
• Quality document submittal preparation experience is a plus.
• Customer specification and drawing review experience is a plus.
• Audit experience in a QA/QC role is desired.
• QA/QC role in a manufacturing and engineering environment is a plus.
• Flexible attitude towards working in other areas and overtime if needed.

ACCESS TO RESTRICTED INFORMATION: This role requires immediate and routine access to restricted information under federal law. Under applicable DOE orders and client contracts, non-U.S. citizens (including lawful permanent residents) may require an approved DOE Foreign National Visit/Assignment (FNVA) before starting work. Because this position requires immediate access, JFT cannot initiate or sponsor new FNVA processes. Hiring is contingent on the candidate's eligibility to access all required information and facilities as of the start date. All offers are subject to applicable licensing, training, and other client or government requirements. JFT does not sponsor employment visas. Hiring decisions are based solely on access requirements and project timing, not on citizenship, immigration status, or national origin. JFT is an equal opportunity employer.

JFT participates in E-Verify and will provide the federal government with your Form I-9 Information to confirm you are authorized to work in the U.S.

FLSA EXEMPT/NONEXEMPT STATUS: FLSA Non-Exempt, overtime eligible