QC-CMM Inspector

System One, Inc.; Chattanooga (TN); On-site; USD 55,000 - 75,000; Full time

Benefits offered by this job

Full benefits

Sign-on bonus

Relocation assistance

Job summary

System One is seeking a Quality Control Inspector for an on-site role in Chattanooga, TN. The inspector will perform dimensional and visual inspections throughout the production cycle, applying GD&T and using CMMs to verify conformance on nuclear, DoE, DoD, and AS9100/ISO9001 projects.

The role emphasizes accuracy, traceability, and effective communication with machinists and production staff, with potential sign-on bonuses for the right candidate and relocation considered.

Qualifications

• Thorough understanding of Geometric Dimensioning and Tolerancing (GD&T).
• Minimum 2 years of experience in quality control inspection activities utilizing Faro Arm CMM and/or Keyence Optical CMM.
• Knowledge of NQA-1, 10 CFR 50 Appendix B, 10 CFR 21, ANSI N45.2, and ASME BPVC Section III and VIII quality requirements.
• Excellent written and verbal communication skills with ability to clearly communicate quality and technical requirements.
• Flexible hours to meet emergent customer needs.
• Must be able to use vernier style gauges and pass an inspection knowledge assessment.

Responsibilities

• Perform dimensional inspections using precision measuring equipment and CMMs to verify product conformance.
• Interpret engineering drawings and GD&T callouts for inspection activities.
• Document inspection results accurately and maintain traceability.
• Program and operate Zeiss CMM (Calypso), Keyence Optical CMM, Keyence Wide Area CMM and/or Faro arm for complex verification.
• Verify incoming materials and in-process products against purchase specifications.
• Witness and hold points as identified in work travelers and ensure compliance with customer requirements.
• Interface with customers and production on inspection results and quality-related matters.
• Maintain familiarity with measurement technology and evolving software updates.

Skills

GD&T

Faro Arm CMM

Keyence Optical CMM

NQA-1 compliance

Communication skills

Flexible hours

Vernier gauges

Tools

Zeiss Metrology

Keyence Metrology

Faro Arm training

Job description

Quality Control Inspector

Direct Hire position with full benefits

Location: On site

Chattanooga, Tn.

~relocation or sign on bonus for the right candidate.

The Quality Control Inspector performs dimensional and visual inspections throughout the production cycle to ensure products meet customer, regulatory, and internal quality requirements. This role uses precision measuring equipment and coordinate measuring machines (CMMs) to verify conformance on Nuclear, DoE, DoD, and AS9100/ISO9001 projects.

This role is evaluated on two equally weighted dimensions: Competency (what you do) and Culture (how you do it).

Dimensional Inspection & Measurement:

• Perform first article, in-process, and final inspections using precision measuring equipment and CMMs to verify product conformance.
• Perform first article, in-process, and final inspections using conventional precision measuring equipment including vernier style calipers, vernier style micrometers, and height gages.
• Interpret engineering drawings and apply Geometric Dimensioning and Tolerancing (GD&T) to inspection activities.
• Document all inspection results accurately and maintain traceability throughout the production cycle.
• Program and operate Zeiss CMM (Calypso software), Keyence Optical CMM, Keyence Wide Area CMM and/or Faro arm for complex dimensional verification.
• Select appropriate measurement methods and equipment based on part geometry and tolerance requirements.
• Maintain proficiency with evolving measurement technology and software updates.

Receiving & In-Process Verification: Verify incoming materials and in-process work at defined control points to ensure all products and components meet quality requirements before advancing through production. Receipt Inspection:

• Perform receipt inspection of materials, parts, and consumables against purchase order specifications.
• Maintain QA-controlled inventory and ensure incoming materials are properly identified and stored.
• Verify material certifications and test reports accompany incoming shipments.

Witness & Hold Point Execution:

• Perform assigned QC witness and hold points as identified in work travelers.
• Verify that all inspection activities are performed according to customer requirements, procedures, and contract agreements.
• May require traveling to customer or supplier facilities for off-site inspection activities.

Quality Compliance & Customer Interface:

• Ensure quality requirements are maintained to meet the QA program and customer requirements.
• Follow all applicable procedures, work instructions, and inspection plans during execution.
• Support the quality team in maintaining controlled documents and current revisions.

Interface with customers and production personnel on inspection results and quality-related matters. Communicate quality and technical requirements clearly and professionally. Support temporary assignments and additional duties as needed to meet business requirements.

Every measurement matters. The inspector understands that the parts they verify go into critical systems, and their work directly impacts whether customers receive products they can trust.

What this looks like in this role:

• Treat every inspection as if the customer is watching.
• Catch dimensional issues before parts move to the next operation.
• Take pride in delivering inspection results that are accurate and complete.
• Understand that your work is the last line of defense before shipment.

Do the Right Thing, Always

"Integrity in every decision."

In nuclear quality, precision and honesty are inseparable. The inspector records what they measure—not what they hope to see—and flags concerns without hesitation.

What this looks like in this role:

• Record measurements exactly as observed.
• Never pass a part that does not meet specifications.
• Speak up when something does not look right, even under schedule pressure.
• Follow procedures consistently, every time.

Our Team Makes the Difference

"Great outcomes start with great people."

Quality is built by the entire team. The inspector works hand-in-hand with machinists, fabricators, and production personnel to ensure the product is right.

What this looks like in this role:

• Communicate inspection results clearly to production so issues get fixed quickly.
• Help colleagues understand drawing requirements and GD&T callouts.
• Step in wherever the team needs support.
• Build trust on the shop floor through reliability and respect.

Relentless Pursuit of Excellence

"Better is the standard."

The inspector strives to be the best at their craft. They invest in mastering measurement technology, stay sharp on GD&T, and take pride in delivering flawless inspection results.

What this looks like in this role:

• Continuously develop CMM programming and measurement skills.
• Look for ways to improve inspection efficiency without sacrificing accuracy.
• Get it right the first time, every time.
• Stay current on measurement technology and industry best practices.

Practice Blameless Accountability

"Accountability that improves performance."

Accountability is strongest when shared and used to improve, not punish. The inspector owns their measurements and flags issues openly so the team can get better together.

What this looks like in this role:

• Own your inspection results—good or bad.
• Report discrepancies immediately without fear of blame.
• Focus on fixing the process, not assigning fault.
• Accept feedback and use it to sharpen your skills.

REQUIRED QUALIFICATIONS

• Thorough understanding of Geometric Dimensioning and Tolerancing (GD&T).
• Minimum 2 years of experience in quality control inspection activities utilizing Faro Arm CMM and/or Keyence Optical CMM.
• Knowledge and experience with NQA-1, 10 CFR 50 Appendix B, 10 CFR 21, ANSI N45.2, and ASME BPVC Section III and VIII quality requirements.
• Excellent written and verbal communication skills with the ability to clearly communicate quality and technical requirements.
• Flexible hours to meet emergent customer needs.
• Must be able to use vernier style gauges (Bore Micrometers, OD Micrometers, Calipers), dial indicators, height gauges, various digital gauges and pass a inspection knowledge assessment that will be given during the in person interview.

PREFERRED EXPERIENCE

• Completed Zeiss Metrology, Keyence Optical CMM, and/or Faro Arm training classes.
• Minimum 5 years of quality control inspection experience in a mechanical or electrical discipline.
• Minimum 5 years of practical experience working with nuclear QA codes and standards.
• Machinist or fabricator experience.
• Nuclear commercial grade dedication experience.
• Experience in aerospace (AS9100) QMS quality department.

PHYSICAL REQUIREMENTS

• Heavy lifting, up to 50 lbs.
• Walking, standing, reaching, stooping, crouching, climbing.

System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan.

System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Ref: #161-Managed Staffing Charlotte