Pulsed Power Operations Engineer

Fusion Energy Base; Denver (CO); On-site; USD 98,000 - 138,000; Full time

Benefits offered by this job

Medical, dental & vision

401(k) with company match

Equity

Paid time off and holidays

Parental leave

Job summary

Xcimer Energy in Denver, CO seeks a Pulsed Power Operations Engineer for on-site work. You will operate and troubleshoot high-voltage pulsed-power systems, support experimental campaigns, and collaborate with engineers and scientists to improve reliability and safety.

The role emphasizes diagnostic work, data analysis of fast transients, and development of procedures for shot operations while growing domain expertise in pulsed-power engineering.

Qualifications

• Masters or Bachelor’s in Electrical Engineering.
• 2+ years in pulsed power or high voltage test operations.
• Entry-level engineers encouraged to apply.

Responsibilities

• Safely operate, maintain, troubleshoot, and improve high-voltage pulsed-power systems and experimental hardware.
• Perform electrical diagnostics using oscilloscopes, probes, meters, and other test equipment.

Skills

Pulsed power

High voltage

Oscilloscopes

Diagnostics

Electrical safety

Technical communication

Lab operations

Education

Electrical Engineering degree

Tools

Oscilloscopes

Test equipment

Job description

Pulsed Power Operations Engineer

Denver, CO - Engineering – Manufacturing Operations /Full-Time /On-site

Xcimer Energy leverages decades of research on Inertial Fusion Energy (IFE) combined with groundbreaking new laser architecture. Our mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. Xcimer has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by leading investors, Xcimer is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. Join us in powering a better world with inertial fusion! This is a full-time, onsite role based at our headquarters in Denver, CO.

Responsibilities

• Safely operate, maintain, troubleshoot, and improve high-voltage, high-current pulsed-power systems and experimental hardware.
• Perform electrical diagnostics using oscilloscopes, probes, meters, and other test equipment to evaluate system performance and identify faults.
• Analyze transient waveforms and test data to identify abnormal behavior, equipment degradation, and potential root causes.
• Inspect, test, install, and replace electrical components including capacitors, resistors, inductors, switches, cables, connectors, and other high-voltage hardware.
• Support preventive and corrective maintenance, component refurbishment, system commissioning, and equipment readiness activities.
• Prepare systems for testing and support pre-shot, post-shot, and troubleshooting activities during experimental campaigns.
• Read and interpret schematics, drawings, procedures, component datasheets, and technical documentation.
• Develop and maintain operational procedures, checklists, test documentation, and equipment records.
• Work closely with engineers, technicians, scientists, and subject matter experts to resolve technical issues and improve system reliability.
• Participate in root-cause investigations, failure analysis, and continuous improvement efforts focused on safety, reliability, repeatability, and operational efficiency.
• Maintain accurate records of system performance, maintenance activities, failures, and lessons learned.
• Develop technical expertise in pulsed-power systems, high-voltage engineering, transient diagnostics, and laboratory operations.
• Train and qualify as a Pulsed Power Controller for the Phoenix Laser System
• Serve as a Pulsed Power Controller, executing procedures and working in support of the Shot Director, during laser experiment operations
• Develop procedures and other shot operations infrastructure for the Phoenix pulsed power system
• Perform hands‑on integration and maintenance work with the Phoenix team during maintenance and upgrade windows

Qualifications

• Masters or Bachelors degree in Electrical Engineering
• Preferred: coursework and/or lab work in pulsed power applications
• Preferred: 2+ years of experience in pulsed power or other high voltage test operations
• Entry-level engineers and candidates with strong laboratory, test, or hands‑on engineering experience are encouraged to apply.
• Experience working on and operating complex, high risk systems.
• Strong understanding of electrical circuit fundamentals, including Ohm’s Law, Kirchhoff’s Laws, voltage/current relationships, impedance, power, and energy.
• Demonstrated ability to perform DC and AC circuit analysis and analyze series/parallel networks.
• Understanding of first- and second-order electrical circuits, including RC, RL, and RLC circuits and their transient response.
• Ability to understand and apply the fundamentals of energy storage and energy transfer in capacitors, inductors, and other energy‑storage systems.
• Highly proficient with oscilloscopes and electrical test equipment, including the ability to properly configure measurements, select appropriate probes, understand bandwidth and sampling considerations, identify measurement artifacts, and interpret waveforms.
• Ability to read and interpret electrical schematics, wiring diagrams, circuit diagrams, and engineering drawings.
• Ability to identify common electrical components, including resistors, capacitors, inductors, diodes, switches, relays, transformers, connectors, and high‑voltage components, and understand their basic functions.
• Ability to read and interpret component datasheets and technical specifications, including voltage, current, power, capacitance, inductance, tolerance, insulation ratings, temperature ratings, and other relevant operating limits.
• Demonstrated ability to troubleshoot electrical systems using a systematic, data‑driven approach, including identifying abnormal component behavior and determining likely root causes.
• Ability to recognize common indicators of failed, degraded, or improperly operating electrical components through visual inspection, electrical measurements, waveform analysis, and comparison against expected performance.
• Understanding of basic electrical safety and high‑voltage laboratory practices, including appropriate use of PPE, grounding, discharge procedures, interlocks, and safe work practices around stored electrical energy.
• Ability to work effectively with engineers, technicians, scientists, and other laboratory personnel in a hands‑on test environment.
• Strong technical communication skills, including the ability to document test results, anomalies, troubleshooting activities, and equipment status clearly and accurately.
• Ability to work in a fast‑paced laboratory environment where equipment configuration, test conditions, and priorities may change rapidly.
• Must be willing to work on a set 8‑hour shift with set start and stop times. Must also be willing to work over on non‑shift hours during critical times.
• Ability to follow optical layouts and drawings and translate them into physical setups.
• Basic mobility - (ability to stand for extended periods, ability to lift up to 50 pounds, etc.)
• Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee of granted asylum.
• Desired: Previous experience working in a laboratory, test, integration, commissioning, manufacturing, or experimental engineering environment.
• Experience operating and troubleshooting high‑voltage or high‑current electrical systems.
• Familiarity with pulsed‑power systems, pulse‑forming networks, Marx generators, capacitor banks, pulse generators, or other high‑energy electrical systems. Pulsed‑power experience is desirable but not required.
• Experience with high‑bandwidth oscilloscopes, differential probes, current probes, Rogowski coils, B‑dot/D‑dot probes, voltage dividers, or other transient diagnostic equipment.
• Experience analyzing fast transient electrical waveforms, including pulse amplitude, rise time, fall time, pulse width, ringing, overshoot, timing, jitter, and waveform‑to‑waveform variation.
• Familiarity with high‑voltage insulation, dielectric breakdown, surface tracking, arcing, corona, and electrical discharge phenomena.
• Understanding of practical considerations associated with stored electrical energy, including energy calculations, charging systems, discharge paths, parasitic inductance/capacitance, and component stress.
• Experience performing component inspection and acceptance testing, including electrical measurements, visual inspection, dimensional inspection, and comparison against specifications or previous baseline data.
• Experience developing or following test procedures, operational procedures, checklists, and configuration‑control documentation.
• Experience participating in root‑cause investigations, failure analysis, corrective actions, and equipment maintenance.
• Ability to distinguish between instrumentation or measurement problems and actual hardware problems when troubleshooting experimental systems.
• Experience working with technicians and contributing to the development of repeatable, reliable, and efficient laboratory operations.
• Experience in environments requiring rigorous attention to configuration control, equipment readiness, preventive maintenance, and operational discipline.

Salary

$97,750 - $138,000 a yearCandidates may be considered for other positions at Xcimer Energy, and our actual base salary will be determined on an individual basis and may vary based on job‑related knowledge and skills, education, and experience. The range is published in accordance with Colorado Equal Pay for Equal Work Act and California Equal Pay Act.

Equal Employment Opportunity

Xcimer Energy is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified, diverse, and dedicated work force. Xcimer Energy hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork, in which all employees recognize and appreciate the diversity of individual team members. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, gender, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Xcimer Energy will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws. For more information on “EEO Is the Law,” please see here and here.

Benefits

• Benefits include medical, dental, and vision coverage; basic and supplemental life insurance; short- and long-term disability; paid parental leave for employees at the time of birth or adoption; and a 401(k) with a company match of up to 6%. Eligible employees also receive equity, allowing them to share in the company’s long‑term success.
• Xcimer operates under a flexible Paid Time Off (ATO) approach. Rather than a fixed number of vacation days, employees are trusted to take the time they need to rest and recharge while meeting the expectations of their role and team.
• In addition, employees receive paid sick time, 13 company‑paid holidays, and an annual paid company shutdown.
• Benefits are available to regular employees, including part‑time and fixed‑term roles, as well as interns, with eligibility varying by benefit. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment.

If you would like more information about how your data is processed, please contact us.