Propulsion Engineer

CHAOS Industries

Washington (District of Columbia)

On-site

USD 150,000 - 210,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Chaos Industries is seeking a Principal Engineer, Propulsion Systems to lead propulsion integration for the CHAOS airplane. You will own engine/APU selection, integration, and certification from preliminary design to service entry, coordinating across teams and suppliers.

You will oversee trade studies, sizing, and installation, ensuring fuel systems and nacelle interfaces meet 14 CFR requirements. On-site DC area; periodic supplier visits and certification meetings.

Qualifications

  • Bachelor’s degree in Aerospace, Mechanical Engineering or a related field.
  • 10+ years of direct experience in aerospace propulsion systems engineering, including aircraft propulsion integration.
  • Experience sizing, selecting and integrating turbofan engines and nacelle systems on a commercial or military transport aircraft.
  • Experience with APU sizing, installation and integration (start, bleed, electrical, fire zone, exhaust and noise).
  • Proficiency with NPSS, AEDsys / ONX or MATLAB/Simulink.
  • Experience with fuel system sizing and architecture.
  • Experience with nacelle, inlet/exhaust, thrust reverser, pylon/mount and engine build-up integration.
  • Working knowledge of 14 CFR Part 25 and Part 33 including how engine certification data supports installation compliance.
  • Experience managing engine, nacelle and fuel system suppliers, including ICDs, requirements flow-down and design reviews.
  • Experience leading multi-criteria trade studies and presenting recommendations to a Chief Engineer or equivalent.
  • Strong communication skills and the ability to influence across engineering functions, suppliers and senior leadership.

Responsibilities

  • Aircraft-level propulsion integration: engine, APU, nacelle, pylon and mounts, inlet and exhaust, thrust reverser, and engine build-up.
  • Engine selection and trade studies, including parametric cycle analysis.
  • Baseline engine deck, installed performance model, and thrust and drag accounting.
  • Engine and APU sizing, mission matching, and engine-airframe matching.
  • Fuel system architecture: tank sizing, feed, vent, pressure refuel, indication, and fuel-tank inerting.
  • Supplier management: interface control documents, statements of work, and technical design reviews.
  • Certification planning and installation qualification, bridging engine certification and airplane installation.
  • Mentoring engineers and setting technical standards across the Propulsion IPT.

Skills

Propulsion engineering
Aircraft propulsion integration
Engine sizing & trade studies
APU sizing & integration
Nacelle & inlet/exhaust integration
NPSS / AEDsys / MATLAB/Simulink
Fuel system sizing
Powerplant certification familiarity (
Supplier management & ICDs
Mult-criteria trade studies
Technical leadership / mentoring

Education

Bachelor’s degree in Aerospace/Mechanical Engineering
Master’s degree in thermal sciences or propulsion
PhD in propulsion-related field

Tools

NPSS
AEDsys / ONX
MATLAB/Simulink
CFD

Job description

As Principal Engineer, Propulsion Systems, you’ll be the propulsion technical authority for the CHAOS airplane. CHAOS isn’t developing an engine. You’ll recommend the engine and APU and own how they integrate with the airplane, taking the configuration from preliminary design through certification and entry into service.

You’ll lead the Propulsion Integrated Product Team, report to the Propulsion Lead, and present trade results and recommendations to the Chief Engineer. You’ll be accountable for meeting the program’s key targets: fuel consumption, weight, community noise, emissions, cost and schedule.

What you’ll own
  • Aircraft-level propulsion integration: engine, APU, nacelle, pylon and mounts, inlet and exhaust, thrust reverser, and engine build-up
  • Engine selection and trade studies, including parametric cycle analysis
  • The baseline engine deck, installed performance model, and thrust and drag accounting
  • Engine and APU sizing, mission matching, and engine-airframe matching
  • Fuel system architecture: tank sizing, feed, vent, pressure refuel, indication, and fuel-tank inerting
  • Supplier management: interface control documents, statements of work, and technical design reviews
  • Certification planning and installation qualification, bridging engine certification (14 CFR Part 33) and airplane installation (14 CFR Part 25)
  • Mentoring engineers and setting technical standards across the Propulsion IPT
What you’ll bring
  • Bachelor’s degree in Aerospace, Mechanical Engineering or a related field, plus 10+ years of direct experience in aerospace propulsion systems engineering, including aircraft propulsion integration (or an advanced degree with fewer years)
  • Experience sizing, selecting and integrating turbofan engines and nacelle systems on a commercial or military transport aircraft
  • Experience with APU sizing, installation and integration (start, bleed, electrical, fire zone, exhaust and noise)
  • Proficiency with NPSS, AEDsys / ONX or MATLAB/Simulink
  • Experience with fuel system sizing and architecture
  • Experience with nacelle, inlet/exhaust, thrust reverser, pylon/mount and engine build-up integration
  • Working knowledge of 14 CFR Part 25 (powerplant, fuel system, fire protection) and Part 33, including how engine certification data supports installation compliance
  • Experience managing engine, nacelle and fuel system suppliers, including ICDs, requirements flow-down and design reviews
  • Experience leading multi-criteria trade studies and presenting recommendations to a Chief Engineer or equivalent
  • Strong communication skills and the ability to influence across engineering functions, suppliers and senior leadership
Preferred
  • Master’s degree or PhD in thermal sciences or advanced propulsion
  • CFD experience
  • Experience with hybrid/electric, open fan or cryogenic fuel systems
  • Experience establishing means of compliance with the FAA or EASA, including special conditions and issue papers
  • Experience with fuel-tank flammability reduction or inerting systems
  • Experience with engine and APU installation testing (wind tunnel, ground, flight)
  • Full program lifecycle experience, from preliminary design through certification and entry into service
Location and requirements

This role is based on-site in Washington, DC, with periodic travel to supplier sites, test facilities and certification authority meetings. Access to export-controlled technical data is required, so candidates must be eligible under applicable regulations. A government clearance may be required depending on program profile.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Principal Propulsion Systems Engineer
Principal Propulsion Systems Engineer

Chaos Industries • Washington

On-site
USD 150,000 - 210,000
Principal Propulsion Engineer, IPT Lead
Principal Propulsion Engineer, IPT Lead

Chaos Industries • San Diego (CA)

On-site
USD 180,000 - 260,000
Health, dental and vision benefits
401k with company match
FSA/HSA options
+5
Principal Propulsion Engineer, IPT Lead
Principal Propulsion Engineer, IPT Lead

Chaos Industries • El Segundo (CA)

On-site
USD 180,000 - 260,000
Health benefits
401k with company match
Free daily lunch onsite
+1
Principal Propulsion Engineer, IPT Lead
Principal Propulsion Engineer, IPT Lead

Hardware FYI • El Segundo (CA)

On-site
USD 180,000 - 260,000
Health benefits
401k with company match
Relocation assistance
+1
Principal Propulsion Engineer, IPT Lead New El Segundo, California, United States
Principal Propulsion Engineer, IPT Lead New El Segundo, California, United States

Chaos, Inc. • El Segundo (CA)

On-site
USD 180,000 - 260,000
Health benefits
401k match
Free daily lunch onsite
+2
Senior Propulsion Lead: Engine & APU Integration
Senior Propulsion Lead: Engine & APU Integration

Chaos Industries • San Diego (CA)

On-site
USD 180,000 - 260,000
Health, dental and vision benefits
401k with company match
FSA/HSA options
+5
Lead Propulsion Systems Architect – Turbofan & APU, Equity
Lead Propulsion Systems Architect – Turbofan & APU, Equity

Chaos Industries • El Segundo (CA)

On-site
USD 180,000 - 260,000
Health benefits
401k with company match
Free daily lunch onsite
+1
Lead Propulsion Engineer, Aerospace – Equity + On-site
Lead Propulsion Engineer, Aerospace – Equity + On-site

Chaos, Inc. • El Segundo (CA)

On-site
USD 180,000 - 260,000
Health benefits
401k match
Free daily lunch onsite
+2
Principal Propulsion Architect - IPT Lead (Equity)
Principal Propulsion Architect - IPT Lead (Equity)

Hardware FYI • El Segundo (CA)

On-site
USD 180,000 - 260,000
Health benefits
401k with company match
Relocation assistance
+1
Mid-Level Propulsion System Integration Engineer
Mid-Level Propulsion System Integration Engineer

Boeing Co. • North Charleston (SC)

On-site
USD 112,200 - 151,800