Production Inspector

All Plastics

Kerrville (TX)

On-site

USD 36,000 - 56,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

All Plastics is seeking a Production Inspector to sort, inspect, count, and pack plastic parts during shift-work. The role includes training on QA criteria and performing secondary operations as directed by the Team Lead.

You’ll maintain a clean, safe workspace and report any machine issues promptly. Responsibilities include trimming or rejecting parts per instructions, stacking parts for transport, and assisting other team members as needed.

Qualifications

  • High school diploma required.
  • Basic math and manual dexterity are needed.
  • Ability to read simple instructions and measurements.

Responsibilities

  • Remove parts from molding machine, trim, and inspect for QA.
  • Stack boxed parts for transport to warehouse.
  • Learn acceptability criteria and perform trims or rejections as instructed.
  • Keep workspace clean and safe; clean at end of shift.
  • Report machine or mold issues to supervisor immediately.
  • Assist with secondary operations as directed by Team Lead.
  • Bring all company tools to work daily and wear PPE.
  • Pass on job information to the next shift.
  • Perform duties per AP policies and procedures.

Skills

Hand-eye coordination
Basic arithmetic

Education

High School Diploma

Job description

INTRODUCTION:

This job description describes the authority, duties, responsibilities, reporting relationships and measure of accomplishment for the functional position of the Production Inspector of All-Plastics.

BASIC FUNCTION:

To sort, inspect, count, decorate (if required) and pack plastic parts as directed. This position requires shift-work.

AUTHORITY:

No authority for decision making on own, but may direct the work of others according to instructions from Team Lead or Process Technician. Only has responsibility for self to do job per job description and requests of Team Lead or Process Technician.

REPORTING RELATIONSHIPS:

The Production Inspector takes day to day guidance from the Team Leads and Process Technicians but reports directly to the Production Manager. This position has no supervisory responsibilities.

DUTIES AND RESPONSIBILITIES:
  • Remove parts from molding machine, trim, and perform certain quality assurance tasks on the manufactured parts, and count and box the parts.
  • Stack boxed parts of usually less than 30 pounds on skid for movement to warehouse.
  • Learn how to inspect each part for acceptability per Quality Assurance standards. Trim or reject part as required. This training will be provided by the Team Lead, Process Technician or QA inspector.
  • Keep work space clean and neat enough to permit safe operation. Clean space thoroughly at the end of shift.
  • Report immediately to supervisor or manager any time the machine or mold seems to be damaged or malfunctioning.
  • Report immediately to Team Lead, Process Technician, or Production Manager any time that molded parts in a cycle are unacceptable.
  • Assist other team members as indicated by the Team Lead. At times it will be necessary for a Production Inspector to perform various operations to a part after it is manufactured called "secondary operations." These operation tasks shall be specified by the Team Lead and will be as follows:
    • Reclaim, sort, or salvage materials as indicated
    • Assemble one or more parts per instruction
    • Trim flash or gate from any part per instruction
    • Operate granulators as indicated
    • Operate drill press or milling machine or hand tools as indicated
    • Operate and assist in setup of all hot stamp equipment
    • Operate pin hinging machines
    • Operate sonic welder and hot melt glue machine
    • Sort and box parts as required
  • Bring all company provided tools to work every day regardless of machine assignment for that week. Production Inspectors will not be allowed to work without personal protection equipment.
  • Pass on any information concerning the job they are currently running to the next shift oncoming operator.
  • Perform any work assignment requested by the Production Manager or anyone officially in his capacity.
  • Perform all activities in conformance with AP policies, procedures and job descriptions.
  • Any other various duties as assigned
MEASUREMENT OF PERFORMANCE:

The Production Inspector shall be deemed to be performing in a satisfactory manner when the following have been met and/or exceeded: Ability to complete all tasks assigned by the Production Manager/ Process Technician/ Team Lead thoroughly and in a timely manner on a daily basis. Ability to multi-task and maintain composure in a sometimes hectic environment. Overall satisfaction of immediate supervisor.

Requirements
EQUIREMENTS:
EDUCATION:

Required: High School Diploma. Exceptions to this will be anyone hired before 2014 will be grandfathered in.

SKILLS:

Basic hand and eye coordination; Ability to add, subtract, and multiply.

PHYSICAL:

Job includes lifting, sitting, standing, walking, bending, kneeling, and use of hands and arms. Production Inspectors must have adequate manual dexterity to accomplish trimming with a sharp instrument, good eyesight and hearing. Job may require heavy lifting (Up to 30 lbs.). Peripheral vision and depth perception required to operate machinery.

MENTAL:

Must be able to read, write and speak English.

WORKING CONDITIONS:

Required to work throughout the plant in both air conditioned and non-air-conditioned situations. This position does repetitive tasks using machinery, containing hot materials, and utilizing sharp tools while standing much of the time on concrete floor. Work environment may be hazardous, noisy, and dusty.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Production Inspector
Production Inspector

All-Plastics, LLC • Kerrville (TX)

On-site
USD 31,000 - 40,000
QA Inspector
QA Inspector

All Plastics • Kerrville (TX)

On-site
USD 38,000 - 65,000
QA Inspector
QA Inspector

All-Plastics, LLC • Kerrville (TX)

On-site
USD 36,000 - 48,000
Plastic Parts Quality Inspector
Plastic Parts Quality Inspector

All-Plastics, LLC • Kerrville (TX)

On-site
USD 31,000 - 40,000
Production Supervisor
Production Supervisor

Prysmian • North Las Vegas (NV)

On-site
USD 65,000 - 90,000
Quality Inspector for Production & Assembly
Quality Inspector for Production & Assembly

All Plastics • Kerrville (TX)

On-site
USD 36,000 - 56,000
Quality Inspector
Quality Inspector

Summit Polymers • Elizabethtown (KY)

On-site
USD 33,000 - 44,000
Process Technician
Process Technician

All-Plastics, LLC • Kerrville (TX)

On-site
USD 48,000 - 64,000
Production Quality Inspection - Part Time
Production Quality Inspection - Part Time

Accu-Mold Corp • Ankeny (IA)

On-site
USD 19,000 - 25,000
Precision Molded Parts Quality Inspector
Precision Molded Parts Quality Inspector

Accu-mold LLC • Ankeny (IA)

Hybrid
USD 42,000 - 54,000