Production Equipment Technician

ACO, Inc

Mentor (OH)

On-site

USD 36,000 - 41,000

Full time

25 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical & Dental
Vision/Life/Disability
401(k) Match
HSA & FSA

Job summary

ACO, Inc in Mentor, OH is seeking a maintenance technician responsible for repairing and maintaining mechanical equipment and programmable logic controllers on production equipment. The role performs a variety of production equipment maintenance tasks.

You will backup other maintenance personnel, troubleshoot electro-mechanical systems, work with welding fabrications, and follow safety and quality procedures across shifts.

Qualifications

  • Requires completion of an Electrical Technician certification program and hands-on experience (minimum five years).
  • Certificate in Equipment Maintenance from technical school, or two years related experience and/or Training.

Responsibilities

  • Perform maintenance and repairs involving electrical and mechanical components; welding fabrication on production equipment.
  • Troubleshoot mechanical/electrical systems: PLCs I/O, motor starters, relays, switches; apply root-cause analysis.
  • Repair production equipment including 480-3 phase, DC 24V, AC/DC circuits, drives, loads cells, and cranes.
  • Install, retrofit and upgrade equipment; maintain shop tools and facility equipment.
  • Read schematics, interpret safety rules, and maintain clean repair records; follow PM schedules.

Skills

Mechanical troubleshooting
Electrical troubleshooting
Preventive maintenance
Reading blueprints/schematics

Education

Electrical Technician certification
Equipment Maintenance certificate from technical school

Tools

Welding equipment (ACR/MIG/TIG)
Forklift operation
Scissor lift
PLC troubleshooting
Electrical & mechanical drawings

Job description

Responsible for repairing and maintaining mechanical equipment systems and programmable logic controls on the Production Equipment. Perform a variety of Production Equipment Maintenance. Backup other maintenance personnel on projects as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Perform maintenance and repairs involving some of the following: Observes functioning of installed equipment to detect hazards, problems, and the need for service repair and or replacement of electrical system and mechanical components. ARC and MIG Welding fabrications work on production equipment in the facility.
  • Troubleshoot diagnose and repair mechanical/electrical system problems such as electrical circuits, controls, motor starters, proximity switches, photo-eyes, and PLCs I/O system, contactor, and relay-base, using root cause analysis principles and taking corrective action to repairing or replacing electrical and mechanical component.
  • Debug, and repair production equipment 480-3 phase and DC 24 voltage system, AC/DC circuit, frequency drives, load cells, power distribution, overhead cranes, induction motor, and other machine control components, as quickly and safely as possible to ensure minimal production down time on manufacturing equipment.
  • Responsible for equipment installations, retrofits, and upgrades on electrical and mechanical system.
  • Set up and operate a range of machine tools and equipment to make sure repairs are done safety and efficiently, Responsibility for maintaining department tools and equipment in the maintenance shop and facility.
  • Identify and troubleshoot sources of mechanical failure. Make recommendations and report problems to immediate Supervisor for future improvements on building and or equipment in the manufacturing facility
  • Maintain neat and orderly inventory of equipment spare parts, i.e. busses, controls, switches etc.
  • Follow preventive maintenance schedule for equipment. Keep neat and accurate repair records and other department information such as walk-throughs and daily inspection on manufacturing equipment in the plant.
  • Follow standard operating procedures for preventative maintenance and predictive production equipment.
  • Position is responsible for building and grounds property up keeping and maintenance personnel.
  • Maintain clean, neat, and orderly work areas to ensure safety and 5s is met in the facility and maintenance shop.
  • Travel occasionally from plant to plant will be required for maintenance technician on all shifts.
  • Comply with Company policies, procedures, and protocol including safety is meet and quality is assured.

EDUCATION and EXPERIENCE:

  • Requires completion of an Electrical Technician certification program, and hands on experience for a Minimum of five years’ experience.
  • Certificate in Equipment Maintenance from technical school; or two years related experience and/or Training; or equivalent combination of education and experience.

ADDITIONAL ELIGIBILITY REQUIREMENTS:

  • Must be able to operate company vehicle and mobile equipment Forklift, Reach Fork, scissor lift etc.
  • Must have basic welding fabrications skills with ACR, MIG and TIG.
  • Must have strong troubleshooting skill for electro-mechanical and building maintenance.
  • Must have basic Computer/PLC troubleshooting skills understanding of ladder logic is helpful.
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions.
  • Ability to read electrical and mechanical drawings/schematics for plant equipment.
  • Ability to write routine reports and correspondence with company guidelines and procedures.
  • Ability to speak effectively before groups of customers or employees of organization.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Also basic measuring tools.
  • Must have basic computer skills using Windows and Microsoft Office.
  • Medical & Dental
  • Company paid - Vision, Life Insurance, Short-Term, & Long-Term Disability
  • 401(k) Match
  • HSA & FSA

PHYSICAL DEMANDS:

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk; stoop, kneel, or crouch; and talk or hear. The employee must frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, and color vision.

OTHER DUTIES:

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

SUMMARY:

Responsible for repairing and maintaining mechanical equipment systems and programmable logic controls on the Production Equipment. Perform a variety of Production Equipment Maintenance. Backup other maintenance personnel on projects as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Perform maintenance and repairs involving some of the following: Observes functioning of installed equipment to detect hazards, problems, and the need for service repair and or replacement of electrical system and mechanical components. ARC and MIG Welding fabrications work on production equipment in the facility.
  • Troubleshoot diagnose and repair mechanical/electrical system problems such as electrical circuits, controls, motor starters, proximity switches, photo-eyes, and PLCs I/O system, contactor, and relay-base, using root cause analysis principles and taking corrective action to repairing or replacing electrical and mechanical component.
  • Debug, and repair production equipment 480-3 phase and DC 24 voltage system, AC/DC circuit, frequency drives, load cells, power distribution, overhead cranes, induction motor, and other machine control components, as quickly and safely as possible to ensure minimal production down time on manufacturing equipment.
  • Responsible for equipment installations, retrofits, and upgrades on electrical and mechanical system.
  • Set up and operate a range of machine tools and equipment to make sure repairs are done safety and efficiently, Responsibility for maintaining department tools and equipment in the maintenance shop and facility.
  • Identify and troubleshoot sources of mechanical failure. Make recommendations and report problems to immediate Supervisor for future improvements on building and or equipment in the manufacturing facility
  • Maintain neat and orderly inventory of equipment spare parts, i.e. busses, controls, switches etc.
  • Follow preventive maintenance schedule for equipment. Keep neat and accurate repair records and other department information such as walk-throughs and daily inspection on manufacturing equipment in the plant.
  • Follow standard operating procedures for preventative maintenance and predictive production equipment.
  • Position is responsible for building and grounds property up keeping and maintenance personnel.
  • Maintain clean, neat, and orderly work areas to ensure safety and 5s is met in the facility and maintenance shop.
  • Travel occasionally from plant to plant will be required for maintenance technician on all shifts.
  • Comply with Company policies, procedures, and protocol including safety is meet and quality is assured.

EDUCATION and EXPERIENCE:

  • Requires completion of an Electrical Technician certification program, and hands on experience for a Minimum of five years’ experience.
  • Certificate in Equipment Maintenance from technical school; or two years related experience and/or Training; or equivalent combination of education and experience.

ADDITIONAL ELIGIBILITY REQUIREMENTS:

  • Must be able to operate company vehicle and mobile equipment Forklift, Reach Fork, scissor lift etc.
  • Must have basic welding fabrications skills with ACR, MIG and TIG.
  • Must have strong troubleshooting skill for electro-mechanical and building maintenance.
  • Must have basic Computer/PLC troubleshooting skills understanding of ladder logic is helpful.
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions.
  • Ability to read electrical and mechanical drawings/schematics for plant equipment.
  • Ability to write routine reports and correspondence with company guidelines and procedures.
  • Ability to speak effectively before groups of customers or employees of organization.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Also basic measuring tools.
  • Must have basic computer skills using Windows and Microsoft Office.

Benefits

  • Medical & Dental
  • Company paid - Vision, Life Insurance, Short-Term, & Long-Term Disability
  • 401(k) Match
  • HSA & FSA

PHYSICAL DEMANDS:

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk; stoop, kneel, or crouch; and talk or hear. The employee must frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, and color vision.

OTHER DUTIES:

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

SUMMARY:

Responsible for repairing and maintaining mechanical equipment systems and programmable logic controls on the Production Equipment. Perform a variety of Production Equipment Maintenance. Backup other maintenance personnel on projects as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Perform maintenance and repairs involving some of the following: Observes functioning of installed equipment to detect hazards, problems, and the need for service repair and or replacement of electrical system and mechanical components. ARC and MIG Welding fabrications work on production equipment in the facility.
  • Troubleshoot diagnose and repair mechanical/electrical system problems such as electrical circuits, controls, motor starters, proximity switches, photo-eyes, and PLCs I/O system, contactor, and relay-base, using root cause analysis principles and taking corrective action to repairing or replacing electrical and mechanical component.
  • Debug, and repair production equipment 480-3 phase and DC 24 voltage system, AC/DC circuit, frequency drives, load cells, power distribution, overhead cranes, induction motor, and other machine control components, as quickly and safely as possible to ensure minimal production down time on manufacturing equipment.
  • Responsible for equipment installations, retrofits, and upgrades on electrical and mechanical system.
  • Set up and operate a range of machine tools and equipment to make sure repairs are done safety and efficiently, Responsibility for maintaining department tools and equipment in the maintenance shop and facility.
  • Identify and troubleshoot sources of mechanical failure. Make recommendations and report problems to immediate Supervisor for future improvements on building and or equipment in the manufacturing facility
  • Maintain neat and orderly inventory of equipment spare parts, i.e. busses, controls, switches etc.
  • Follow preventive maintenance schedule for equipment. Keep neat and accurate repair records and other department information such as walk-throughs and daily inspection on manufacturing equipment in the plant.
  • Follow standard operating procedures for preventative maintenance and predictive production equipment.
  • Position is responsible for building and grounds property up keeping and maintenance personnel.
  • Maintain clean, neat, and orderly work areas to ensure safety and 5s is met in the facility and maintenance shop.
  • Travel occasionally from plant to plant will be required for maintenance technician on all shifts.
  • Comply with Company policies, procedures, and protocol including safety is meet and quality is assured.

EDUCATION and EXPERIENCE:

  • Requires completion of an Electrical Technician certification program, and hands on experience for a Minimum of five years’ experience.
  • Certificate in Equipment Maintenance from technical school; or two years related experience and/or Training; or equivalent combination of education and experience.

ADDITIONAL ELIGIBILITY REQUIREMENTS:

  • Must be able to operate company vehicle and mobile equipment Forklift, Reach Fork, scissor lift etc.
  • Must have basic welding fabrications skills with ACR, MIG and TIG.
  • Must have strong troubleshooting skill for electro-mechanical and building maintenance.
  • Must have basic Computer/PLC troubleshooting skills understanding of ladder logic is helpful.
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions.
  • Ability to read electrical and mechanical drawings/schematics for plant equipment.
  • Ability to write routine reports and correspondence with company guidelines and procedures.
  • Ability to speak effectively before groups of customers or employees of organization.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Also basic measuring tools.
  • Must have basic computer skills using Windows and Microsoft Office.

Benefits

  • Medical & Dental
  • Company paid - Vision, Life Insurance, Short-Term, & Long-Term Disability
  • 401(k) Match
  • HSA & FSA

PHYSICAL DEMANDS:

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk; stoop, kneel, or crouch; and talk or hear. The employee must frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, and color vision.

OTHER DUTIES:

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.


8am-5pm Mon-Fri
Salary Information

$26 - $30Hourly Wage

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Mold Development
Maintenance Mold Development

ACO, Inc. • Ohio

Hybrid
USD 36,000 - 41,000
Medical & Dental
Vision, Life Insurance
Disability — Short-Term, Long-Term
+2
Maintenance Technician
Maintenance Technician

Arcosa Inc. • Fillmore (CA)

On-site
USD 42,705 - 48,216
Electrician
Electrician

Western Milling • California

On-site
USD 41,000 - 47,000
Health insurance
Dental insurance
Vision insurance
+6
Maintenance Technician
Maintenance Technician

Exegistics • Indianapolis (IN)

On-site
USD 34,000 - 48,000
Maintenance Technician, 2nd shift
Maintenance Technician, 2nd shift

IPS Corporation • Hartsville (TN)

On-site
USD 42,000 - 64,000
Maintenance Technician Supervisor
Maintenance Technician Supervisor

Moove NA Distribution Holdings, Inc • Wichita (KS)

On-site
USD 65,000 - 90,000
Industrial Maintenance Technician - 12-Hour Shifts
Industrial Maintenance Technician - 12-Hour Shifts

Silver King Beverage Company • Salt Lake City (UT)

Hybrid
USD 30,000 - 47,000
Maintenance Technician
Maintenance Technician

Silver King Beverage Company • Salt Lake City (UT)

On-site
USD 30,000 - 47,000
Maintenance Technician Night Shift 6PM-6AM $85,000-95,000/Year 1
Maintenance Technician Night Shift 6PM-6AM $85,000-95,000/Year 1

Bel • Brookings (SD)

On-site
USD 55,000 - 75,000
Maintenance Manager
Maintenance Manager

MW Components, Inc. • Greer (SC)

On-site
USD 65,000 - 90,000